2011 Ford Flex

I have had this vehicle since about August 2025, the brakes and wheel bearings have failed twice, the strut failed, the power steering system has messed up repeatedly, the coolant came FLYING out of the car (while parked) FOR ABSOLUTELY NO REASON! There have been multiple warning lights on since I got the vehicle and I have been told they are just sensors from multiple mechanics and that they don't mean anything. As it relates to the issues, the brakes, calipers, and wheel bearings have given out twice WHILE DRIVING without any sort of warning up until they seized! The strut on the front passenger side has broken for no known reason and the power steering system has been non stop eating power steering fluid with no leaks. Since I have gotten this vehicle, I have put OVER 7,000 dollars worth of work into it. This went to fixing the brake calipers, brakes, rotors, all the steering mechanisms (tie rods, sway bars, etc.) and wheel bearings twice, trying to figure out why coolant flew out of the vehicle for no known reason, trying to figure out where the power steering fluid is going, all to no avail. I have had multiple mechanics look at and check all the components of the vehicle, and they can't even figure out what is going on other than things just fail without warning non stop. There is something wrong with these vehicles, EVERY SINGLE OWNER OF A 2011 FORD FLEX THAT I HAVE SPOKEN TO HAS SAID THE SAME EXACT THING, THEY ARE DEALING WITH THE SAME EXACT ISSUES AS I AM, AND NO ONE KNOWS WHY! THESE VEHICLES NEED TO BE RECALLED AND A CHECK FOR THE PRICE OF A PERFECT 2011 FORD FLEX GIVEN TO EVERY 2011 FORD FLEX OWNER, THEN THEY NEED TO BE TAKEN OFF THE STREETS AS THEY ARE A DANGER TO THE PEOPLE DRIVING THEM AND ALL OTHER DRIVERS AS WELL AS PASSENGERS IN THE FLEX AND ANY OTHER VEHICLE! A 2011 FOR FLEX IN PERFECT CONDITION IS WORTH APPROXIMATELY $15,000, FORD SHOULD BE SUED FOR THIS! My vehicle is available for inspection when necessary, thank you!

NHTSA ID

11736911

Incident

May 2, 2026

Went to put car in reverse and it kept driving forward- no weird sound or anything. Proceeded to put the car in park and it was still moving forward. Transmission was stuck on drive.The shifter is disconnected from the transmission with no warning .Just looked and the transmission shifter bushing is disconnected. Also saw that this part is a recall on other ford vehicles. Had this been recalled on all vehicles with this part, I would have known to have it fixed. Luckily I was somewhere safe when this happened but it would have put myself as well as others in danger.

NHTSA ID

11734241

Incident

Apr 27, 2026

I had changed all my bulbs and fuses to my car for my brake lights several times and they still don’t work. My car almost got hit with me and my kids in it due to my break lights not working. Also my car keeps saying service advance trac and keeps saying it every time I drive. My car also keeps running out of power steering fluid every two week I have to add more to keep it from making that loud noise while driving.

NHTSA ID

11694945

Incident

Oct 22, 2025

My brakes locked up suddenly on the rear end causing me to get stuck in the middle of the road and unable to move it, even to tow it. I had to take 2 days almost to fix it in the middle of the road, since yesterday morning. They also began locking up suddenly on the front end, the wheel bearing, CV Joint, Tie Rods, CV Axles, CV Boots, and sway bars began failing out of nowhere as well. The brakes may or may not be able to be replicated, as they are partially fixed and yes my entire front end can be replicated. The danger is my brakes locked up as I was driving, in the middle of the road at that. I have not been able to get the front end fixed as it is expensive, however the danger of this is the tires falling off or the front end failing all together. ALL of the other people who drive these that I have talked to and met have had the same problem and yes they are factory parts! Even the people who have only 30 to 60000 miles on their 2011 Ford Flex Titaniums have these issues! Not only this but also the sensors go bad almost immediately off the lot, which can cause the car to brake without warning, stop running out of nowhere, make the power steering module fail, make your vehicle stutter because ALL of the sensors are bad. These vehicles need to be recalled and fixed, or recalled and replaced with better vehicles (from $60,000 up to $95,000) with any mileage any year. Please recall these and please help! I just got mine, this isn't right!

NHTSA ID

11694344

Incident

Oct 17, 2025

The contact owns a 2011 Ford Flex. The contact stated that on several occasions while attempting to start the vehicle, the power steering assist warning light illuminated, and the steering wheel became firm. The vehicle was taken to a dealer where it was diagnosed that the electronic power steering module link needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure. The contact believed that the failure was associated with NHTSA Campaign Number: 15V340000 (Steering). The manufacturer was notified of the failure. The failure mileage was approximately 170,000.

NHTSA ID

11681381

Incident

Jul 15, 2025

Mileage

170,000 mi

Electric Power Steering lights up and steering wheel locks up, can hardly make it move at it. We turn the car off and turn it back on. Sometimes the power steering returns, sometimes it doesn't and we can't drive the car. We called the dealer after this happened and they said it was an ECOBOOST Flex and wasn't included in the Safety Recall 15S18 National Highway Traffic Safety Administration (.gov) Jul 1, 2015 — If any "loss of steering assist" DTCs are present, replace the power steering gear assembly. It seems that this is the exact problem as noted in the recall but Ford dealership will not fix it for free. Ford gave me a PDF that explains they are not responsible for this safety issue and cannot provide free repairs because my car is OVER 150,000 miles. My car now has 200,000 miles and I have had the car serviced at this same dealer for oil changes/tire rotation and they never told me about this recall. The purpose of this repair is to update the PSCM to prevent loss of steering assist while driving due to a motor position sensor fault or replace the steering gear if the PSCM has certain Diagnostic Trouble Codes (DTCs).Jul 1, 2015

NHTSA ID

11659824

Incident

May 8, 2025

The contact owns a 2011 Ford Flex. The contact stated that while driving at an undisclosed speed, he became aware that the electronic power steering was not functioning properly, requiring increased effort to maneuver the vehicle. The service power steering warning light was illuminated. The vehicle was taken to an independent mechanic, who diagnosed a failure with the Power Steering Control Module (PSCM). The vehicle was repaired, but the failure reoccurred 4-months later. The vehicle was taken to the dealer and was diagnosed with Power Steering Control Module failure. The vehicle was not repaired. After investigating the failure, the contact related the failure to NHTSA Campaign Number: 15V340000 (Steering), but the VIN was not included. The manufacturer was not notified of the failure. The failure mileage was 118,000.

NHTSA ID

11633160

Incident

Feb 15, 2024

Mileage

118,000 mi

This accident didn’t involve myself. It involved my father who borrowed my 2011 Ford Flex for the evening. This was a one vehicle accident. It is unknown what happened to cause him to Swerve and hit a hit. The air bags didn’t deploy in the Vehicle. My father was wearing his seatbelt. An electric fire started and the car burnt along with my father he wasn’t able to be pulled from the vehicle before it caught fire. According to the witnesses, the airbags did not go off. My father had blunt trauma to the chest and to his frontal lobe and broken ribs. In addition to lots of other injuries that would’ve been avoided if the airbags would have went off. My father could’ve been alive if the airbags went off. But instead, he is dead. The pain and suffering and Trauma that I live through every day of my life of missing my father has been unbearable this past year. I 100% believe the fire started from the air bags not going off and it was faulty wiring in this vehicle. I believe this whole Heartedly. My father Didn’t deserve to die this way. I have a flash drive of the scene with pictures taken by the Missouri State Highway patrol that has been certified. I can send as Evidence as well. I have not viewed this flash drive as it would be too traumatic for me to view them of my father. I do not want to picture him like that. But I feel this case needs to be investigated. I no longer can be OK with this situation. The insurance company never inspected it. My insurance company was the General- Full Coverage- also the vehicle had a lean on it with Car Mart. Not sure if anyone inspected the vehicle after the accident. I know the Missouri house patrol did a full investigation. It set at at tow yard for months in Columbia, Mo. There were multiple people on the scene. Macon Co. ambulance, Macon Co. fire and rescue Macon Co. corners office which they called wrong time of death Which letters to believe my father wasn’t dead yet From the accident. The air bags could have saved HIM!!!!!!

NHTSA ID

11603939

Incident

Aug 20, 2023

Ford and Lincoln vehicles equipped with wired keyless entry keypad systems and accessory wireless keyless entry keypad systems may or may not come with a wallet card containing the master code. Unlike the integrated wired keypad, the accessory wireless keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool or from the label printed on the body control module (BCM). The Factory Keyless Entry Code application within the diagnostic scan tool will not provide an applicable master code for the accessory wireless keypad. If the wallet card for an accessory keypad is not available, the "Wireless RF Keypad Diagnosis Guide" can be referenced and provides direction on how to retrieve the master code. This guide is located under the Workshop Manual tab > Accessories > Installation > Wireless RF Keypad Diagnosis Guide > PPT C > Step C2.<br /><br /> Note: The only available keypad for some vehicles from the assembly plant is the accessory wireless keyless entry keypad. The integrated wired keypad cannot be installed on vehicles not equipped from the factory with a wired keyless entry k

All accessory stick-on keyless entry keypads come with a wallet card containing the master code. If the accessory keypad was factory installed, this card will be placed in the glove box and should be handed to the vehicles owner during initial delivery. Unlike the integrated (wired) factory keypad, the accessory keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool. If the wallet card for an accessory keypad is lost, follow these steps to recover the code. Dealer Key Code access is granted through the Dealer Program Enrollment System (DPES); dealership management can authorize users. The authorized user must go to FMCDealer.com > Parts and Service > Parts Product Line Information > Keys/Entry Devices > Aftermarket Keyless Entry Keypad Code Access. Follow the instructions on the screen to obtain the master code for the accessory keypad.

For 2000-2024 Ford and Lincoln vehicles, swapping a module from a vehicle for diagnosis purposes is likely to cause errors and is not recommended. It is also not recommended to order a replacement module using a vehicle identification number (VIN) from a different vehicle. Most modules on these affected vehicles are VIN/vehicle specific and hardware variations between modules do exist. Swapping a module from a vehicle or ordering a module using a different vehicle/VIN can cause ineffective repairs and additional vehicle down time. Make sure all appropriate Workshop Manual (WSM) procedures are followed when diagnosing the condition prior to all module replacements and only order modules using the correct VIN.

Some 2009-2020 Ford and Lincoln vehicles equipped with turbochargers may exhibit an oil leak from the turbocharger oil supply or return tubes, O-rings or 6.7L pedestal gasket. Although oil may collect on the turbocharger, it is very rare for a turbocharger to leak oil. To isolate the source of the leak, refer to Workshop Manual (WSM), Section 303-00 General Information > Diagnosis and Testing > Engine > Engine Oil Leaks - Fluorescent Oil Additive Method procedure. When an oil leak is present at a turbocharger oil supply or drain tube, remove the affected oil tube and inspect for damage, and replace the O-ring seals, pedestal gasket or oil tube as required. Refer to WSM, Section 303-04. For claiming, use the affected oil tube or pedestal gasket as the causal part and applicable labor operations in Sections 6 and 9 of the Service Labor Time Standards (SLTS) Manual.

Some 2010-2020 vehicles may exhibit distorted glass with a subtle orange peel pattern or streaking etched into the surface. This is caused by hydrofluoric acid which is used in some car wash solutions as a cleaning agent. Hydrofluoric acid can attack the glass and cause visual distortion and/or discoloration on the outer surface which cannot be removed by further cleaning. If this type of distortion is found, inspect the area of the glass that is covered by the cowl and/or molding. The portion of glass that is covered by the cowl or molding will not be affected by the acid. Hydrofluoric acid damage is not a defect in material or workmanship and is not a warrantable condition.

Some 2009-2017 Expedition/Navigator, 2009-2014 F-150/Mustang, 2008-2009 Sable, 2008-2019 Taurus/Flex/MKT, 2013-2019 Police Interceptor Sedan/Utility, and 2011-2019 Explorer vehicles may exhibit inoperative or intermittent HVAC blower motor function at various fan speed settings. This may be due to a poor electrical connection at the blower motor speed control. If the blower motor speed control is determined to be the causal part, replacement of the electrical connector pigtail harness (14S411) to the blower motor speed control is also recommended to avoid repeat repairs. Use pigtail harness service part numbers 3U2Z-14S411-ZEA or CU2Z-14S411-FA, as both parts are interchangeable. Refer to Wiring Diagram, Cell 5 for recommended splicing procedures.