RoadVitals

2008 INFINITI M45

Recalls, owner-reported complaints, investigations and safety data

Data refreshed

Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
6
Latest Apr 21, 2021
Safety recallsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
6
Latest Aug 9, 2022
InvestigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
1
1 currently open
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
0

Overview

Our database contains 6 NHTSA owner-reported complaints for the 2008 INFINITI M45, most frequently naming the airbags, engine and steering categories. 6 safety recalls have been issued covering this model year; 1 NHTSA investigation names it; and 92 manufacturer communications are on file.

Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.

What owners report

Complaints grouped by the component NHTSA recorded

  • Airbags350.0%
  • Engine233.3%
  • Steering116.7%

Percentages are of component mentions. A single complaint can name more than one component, so these do not sum to the total complaint count.

Safety recalls

6 campaigns cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov

AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE; AIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULE

Aug 9, 2022
375 units potentially affected
The defect: Nissan North America, Inc. (Nissan) is recalling certain air bag inflator replacement service parts that may have been installed as part of a theft or collision repair. The parts include certain passenger-side air bag inflators designed to fit Infiniti 2002-2003 QX4, 2006-2010 M35 and M45; Nissan 2001-2003 Maxima, 2002-2006 Sentra, and both driver and passenger-side inflators designed to fit 2007-2012 Versa Sedan and Versa Hatchback vehicles. Please see Nissan's recall report for the specific part numbers. These replacement inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.
The risk: An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
The remedy: Dealers will inspect and replace the inflators as necessary, free of charge. Owner notification letters are expected to be mailed September 14, 2022. Owners may contact Nissan's customer service at 1-800-867-7669.
Nissan North America, Inc.View on NHTSA.gov

AIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULE

Jan 9, 2020
307,962 units potentially affected
The defect: Nissan North America, Inc. (Nissan) is recalling certain 2001-2003 Maxima, 2002-2006 Sentra, 2002-2004 Pathfinder, 2007-2011 Versa Sedan and Versa Hatchback, 2001-2004 Infiniti I30 and I35, 2002-2003 Inifiniti QX4, 2003-2008 Infiniti FX35 and FX45 and 2006-2010 M35 and M45 vehicles. The vehicles are equipped with non-desiccated, frontal passenger air bag inflators containing phase stabilized ammonium nitrate (PSAN) propellant that were used as interim remedy parts for previous Takata recalls. These inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.
The risk: An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
The remedy: Nissan will notify owners, and dealers will replace the front passenger air bag inflators with alternate desiccated inflators, free of charge. The recall began February 12, 2020. Owners may contact Nissan customer service at 888-737-9511 or Infiniti customer service at 888-810-3715.
Nissan North America, Inc.View on NHTSA.gov

AIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULE

Jan 10, 2017
152,554 units potentially affected
The defect: Nissan North America, Inc. (Nissan) is recalling certain 2012 Nissan Versa hatchbacks originally sold, or ever registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan) and the U.S. Virgin Islands, or "Zone A". Additionally, if not included in "Zone A" above, Nissan is recalling certain 2009-2010 Infiniti M35 and M45 and 2009 Nissan Versa sedans and hatchbacks originally sold, or ever registered, in Arizona, Arkansas, Delaware, the District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia, or "Zone B". Additionally, if not included in "Zone A" or "Zone B" above, Nissan is recalling certain 2005-2008 Infiniti FX35 and FX45, 2006-2010 Infiniti M35 and M45, and 2007-2008 Nissan Versa vehicles originally sold, or ever registered, in Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the front air bags, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
The risk: An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
The remedy: Nissan will notify owners, and dealers will replace the front passenger air bag inflators, free of charge. The recall began on June 8, 2017. Owners will receive a second notice when remedy parts become available. Owners may contact Nissan customer service at 1-800-647-7261.
Nissan North America, Inc.View on NHTSA.gov

Safety investigations

NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect.

EA21002OpenEngineering Analysis

Desiccated Air Bag Inflator Rupture

Opened Sep 17, 2021

From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.

AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE

Recent owner complaints

Reports submitted to NHTSA, shown in the owner's own words

Engine
Filed Apr 21, 2021

TL* THE CONTACT OWNS A 2008 INFINITI M45. THE CONTACT STATED THAT AT START-UP, THE VEHICLE SPUTTERED AND LOSS POWER. THE VEHICLE FAILED TO START. THE CHECK ENGINE WARNING LIGHT WAS ILLUMINATED. THE OWNER CHANGED THE SPARK PLUGS. THE CONTACT CALLED CIRCLE INFINITI (300 NJ-36, WEST LONG BRANCH, NJ 07764, (732) 389-1200) HOWEVER, THE VEHICLE WAS NOT DIAGNOSED NOR REPAIRED. THE MANUFACTURER WAS NOTIFIED OF THE FAILURE. THE APPROXIMATE FAILURE MILEAGE WAS 129,000.

NHTSA ID
11413168
Incident
Apr 16, 2021
Mileage
129,000 mi
Airbags
Filed Nov 1, 2017

TAKATA RECALL

NHTSA ID
11041870
Incident
May 23, 2016
Airbags
Filed Dec 9, 2016

TAKATA AIR BAG RECALL WE RECEIVED A SAFETY RECALL 16V-349 AROUND AUGUST 1, 2016. CONTACTED LOCAL INFINITI DEALER AND THEY HAVE NOT RECEIVED THE REPLACEMENT. COULD EXPECT IT IN 4 TO 6 WEEKS. EXPECTED TIME CAME AND WENT AND WE WERE TOLD IT WOULD BE ANOTHER MONTH TO 6 WEEKS. ADVISED TO NOT LET ANYONE SIT IN THE FRONT PASSENGER SEAT AS AIRBAG COULD EXPLODE WITHOUT WARNING. IT IS DIFFICULT FOR ME TO GET IN AND OUT OF BACK SEAT DUE TO HEALTH PROBLEMS.

NHTSA ID
10934114
Incident
Aug 1, 2016
Airbags
Filed Aug 4, 2016

TL* TAKATA RECALL. THE CONTACT OWNS A 2008 INFINITI M45. THE CONTACT RECEIVED NOTIFICATION OF NHTSA CAMPAIGN NUMBER: 16V349000 (AIR BAGS). THE PART NEEDED TO REPAIR THE VEHICLE WAS UNAVAILABLE. THE CONTACT STATED THAT THE MANUFACTURER EXCEEDED A REASONABLE AMOUNT OF TIME FOR THE RECALL REPAIR. THE MANUFACTURER WAS NOTIFIED OF THE ISSUE. THE CONTACT HAD NOT EXPERIENCED A FAILURE. PARTS DISTRIBUTION DISCONNECT.

NHTSA ID
10893146
Incident
Aug 4, 2016
Engine
Filed Aug 20, 2015

SITTING AT A LIGHT THE FIRST TIME AND THE ENGINE STALLED OUT IN IDLE MODE. THE 2ND TIMEIN THE SAME DAY I WAS DRIVING IN THE NEIGBORHOOD AND GOING MAYBE 15MILES PER HOUR AND THE CAR TURNED OFF WITH NO WARNING OR REASON. IT LOOKS TO ME THAT THE ACCELERATOR PEDAL ASSEMBLY AND ENGING CONTROL MODULE NEEDS TO BE REPLACED ALONG WITH TPMS LAMP

NHTSA ID
10749969
Incident
Aug 19, 2015
Mileage
101,480 mi
Steering
Filed Jan 28, 2013

WHILE DRIVING EAST (UPHILL) ON I-90 FROM SEATTLE TOWARD SNOQUALMIE PASS, MY CAR SUDDENLY AND UNEXPECTEDLY VEERED INTO THE ADJACENT LANE, LITERALLY TEARING/TURNING THE STEERING WHEEL OUT OF MY HANDS. I PULLED OFF THE FREEWAY TO LET MY HEART RATE SLOW DOWN. ON MY RETURN TRIP, DOWNHILL, THE SAME TERRIFYING EXPERIENCE OCCURRED, NARROWLY AVOIDING A COLLISION WITH A TRUCK. A BIT OF INTERNET RESEARCH REVEALED THAT THIS EXPERIENCE IS CALLED "TRAMLINING" AND THAT MANY INFINITI MODELS/YEARS HAVE BEEN REPORTED TO SUFFER FROM IT. I REPORTED MY EXPERIENCES TO MY LOCAL INFINITI DEALER'S SERVICE MANAGER, BUT HE ACTED BAFFLED BY THE TERM "TRAMLINING" AND TOLD ME, "AFTER ALL, YOU OWN A 45S, A SPORT MODEL." HE CHARGED ME A BUNDLE TO PUT NEW TIRES ON MY CAR, BUT THE TRAMLINING PROBLEM HASN'T GONE AWAY -- ONLY MY MONEY. *TR

NHTSA ID
10495018
Incident
Jun 14, 2012
Mileage
25,000 mi

Manufacturer communications

A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.

ITB09-063C

STRUCTURE:BODY

CERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label” may be needed. HINT: Certification Label = FMVSS (Federal Motor Vehicle Safety Standards) label. These items may be available from Infiniti by request if certain criteria are met. This bulletin lists the criteria and provides an application form for such replacements. · The “VIN Plate/Label” (metal plate or vinyl label) is attached to the instrument panel or body on the driver side at the base of the windshield (see Figure 1). · The “Certification Label” (vinyl adhesive label) is located on the lower area of the driver side B-Pillar (see Figure 1).

ITB10-029C

ELECTRICAL SYSTEM

CAN COMMUNICATION CODES – DIAGNOSTIC TIPS AND GUIDELINES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.

ITB13-006D

ELECTRICAL SYSTEM

CAN COMMUNICATION – NETWORK DIAGNOSTIC FLOW CHART This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.

ITB13-052E

ELECTRICAL SYSTEM

INTELLIGENT KEY NOT DETECTED / ENGINE WILL NOT START This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.

ITB13-007I

VISIBILITY/WIPER

REMOVING FOREIGN MATERIAL FROM THE WINDOW GLASS This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.

ITB17-009H

VISIBILITY/WIPER

WINDOW GLASS WARRANTY INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.

Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Compare model years

Complaint and recall counts across every year of this model

INFINITI M45 by model year
YearComplaintsRecallsInvestigationsIssue Index
2013000
2012000
2011000
2010161
2009261
2008Viewing661
2007275145.4
2006726354.0
2005000
2004432348.2
20031292349.3
2002000
2001000

Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.