2021 INFINITI QX50

On December 13, 2023, the Office of Defects Investigation (ODI) opened PE23-023 to investigate allegations of engine failures leading to loss of motive power in model year (MY) 2021-2023 Nissan Rogue; MY 2019-2021 Nissan Altima; and MY 2019-2021 Infiniti QX50 vehicles. At that time, ODI had received 6 Vehicle Owner Questionnaires (VOQ) and multiple early warning reports, with consumers reporting engine knocking noises accompanied by a loss of engine power while driving. The investigation identified bearing failures in certain vehicles equipped with the subject 3-cylinder 1.5L or 4-cylinder 2.0L variable compression turbo (VC-Turbo) engines. ODI also identified early warning reports describing thermal incidents that occurred immediately after the vehicle suffered a catastrophic engine failure.  The failures were the result of a manufacturing defect in specific engine bearings (main, A-, C-, and L-link) or other engine components that may cause engine damage and potentially lead to engine failure. Engine failure can result in a loss of motive power event that can increase the risk of a crash.  Engine failure might also result in a fire if internal components detach and impact the engine block creating a hole that allows engine oil to reach hot surfaces. In its April 2024, May 2024, and June 2025 responses to ODI’s information requests, Nissan provided 998 customer reports (including complaints, field reports, and legal claims) and 1,107 warranty claims related to the alleged defect.  When combining ODI and manufacturer report data, there are 1,878 unique VINs that have experienced failures across all subject vehicles.  In one of the early warning reports, ODI identified an incident involving a 2022 Infiniti QX55 that resulted in an engine fire following an alleged engine failure. The 2022 Infiniti QX55 was not included in the scope of this investigation but the vehicle model shares the same 4-cylinder 2.0L variable compression turbo engine.  Based on the information included with the early warning report, the fire can be directly related to the alleged defect.   A further review of ODI and manufacturer data, identified 12 allegations of engine compartment fires in subject vehicles; three were confirmed as directly related to the engine failure, and nine reports described an under-hood fire that occurred following a loss of power event. Additionally, ODI identified multiple reports describing an engine block crack or hole surrounded by oil residue following an engine failure. On June 27, 2025, Nissan submitted recall 25V-437 involving 443,899 MY 2021-2023 Nissan Rogue, MY 2019-2021 Nissan Altima; MY 2019-2021 Infiniti QX50; and 2022 Infiniti QX55 vehicles. The recall remedy provides the dealer instructions to inspect the engine oil pan for the presence of specific metal debris. For customers with the 3-cylinder 1.5L VC-Turbo engine, if no debris is detected during the inspection, dealers will replace the oil pan gasket, engine oil, and reprogram the vehicle’s Engine Control Module (ECM). For customers with the 4-cylinder 2.0L VC-Turbo engine, if no debris is detected, dealers will replace the engine oil. In the case where specific debris is detected and confirmed by Nissan Powertrain Call Center, dealers will be instructed to replace the engine. In addition, Nissan will extend the vehicle warranty to 10 years and 120,000 miles for the recall subject vehicle population after the dealer performs the inspection. Nissan has implemented multiple corrective actions to address the identified manufacturing defects of certain engine block internal components.  In view of the recall action (25V437) taken by Nissan, ODI is closing this Preliminary Evaluation. The agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Opening Resume ODI Report Identification Number document, go to NHTSA.gov.

On June 16, 2026, a 2021 Infiniti QX50 experienced a safety-related malfunction while being driven at approximately 15–20 mph. The vehicle suddenly jerked, lost power response, displayed multiple warning lights, showed a “System Fault – See Owner’s Manual” message, and became unresponsive/difficult to control. The engine remained on, but the vehicle did not respond properly. The vehicle struck a fixed object/rock. A police report was filed/requested, and medical evaluation was sought afterward. The suspected failed or malfunctioning systems are the engine/powertrain response, electrical system, and related control systems. The vehicle should be available for inspection upon request and should be preserved before any diagnostic codes, freeze-frame data, event data, modules, or electronic records are cleared, reset, repaired, overwritten, or destroyed. Before this incident, repeated drivability and safety-related concerns were reported to Infiniti/dealer service departments, including vibration during acceleration, abnormal gas pedal vibration, lack of acceleration, poor power response, jerking/jolting, rough ride, abnormal noises, front-end noise, and safety/reliability concerns. Some concerns were documented in service records. Prior repairs included front passenger-side wheel bearing replacement and cooling fan/IPDM-related warranty work, but the drivability/power-response concerns continued. UNKNOWN whether the manufacturer completed a full post-incident inspection. The vehicle has been reviewed by police and insurance-related parties to the extent related to the collision. This complaint is being filed because the condition appears to involve a safety defect causing loss of power response and system fault warnings while driving. I am currently waiting on the police report, the report number has been provided.

NHTSA ID

11747250

Incident

Jun 16, 2026

The contact owns a 2021 Infiniti QX50. The contact stated that while driving at an undisclosed speed, there was an abnormal sound coming from under the hood. No warning light was illuminated. The vehicle was taken to a local dealer, where it was diagnosed and metal shavings were found in the oil pan. Upon further investigation, the contact associated the failure with NHTSA Campaign Number: 25V437000 (Engine and Engine Cooling); however, the repair was denied due to the criteria not being met, a lack of maintenance records, and sludge in the oil pan. The vehicle was previously taken to a local independent mechanic to be diagnosed and there was no sludge in the oil pan from a previous maintenance service. The contact was adamant that the VIN was previously associated with the recall, but was removed. The manufacturer was made aware of the failure. The failure mileage was approximately 122,000.

NHTSA ID

11746230

Incident

Jun 17, 2026

Mileage

122,000 mi

There is an active and unremedied safety recall on my 2021 Infiniti QX50 (NHTSA Recall #25V-437) for a critical engine defect that can result in complete engine failure and risk of fire. The recall was issued on June 26, 2025. I am an active-duty military member stationed in Germany. I shipped my vehicle in January 2026, before a remedy was available. My vehicle is now exhibiting all the early warning signs mentioned in the recall notice, including unusual engine noises, rough performance, and illuminated warning lights. I first contacted Infiniti for assistance on March 19, 2026. As of today's date, after more than three months of communication with their representative (case #[XXX]), Infiniti has failed to provide a remedy or a timeline for the repair. They have been unable to coordinate with a local dealer in Germany, leaving me to drive a vehicle with a known, dangerous safety defect. The manufacturer is failing to provide a remedy in a timely manner as required. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

NHTSA ID

11745834

Incident

Jun 22, 2026

Open recall on Engine (NHTSA #25-V437) Engine has been replaced and recall repaired.

NHTSA ID

11740437

Incident

Jan 19, 2026

The vehicle has experienced ongoing electrical and safety-system related malfunctions shortly after being purchased as an INFINITI Certified Pre-Owned vehicle in April 2025. The issues initially included flickering interior and exterior lights, intermittent door lock malfunctions, and other electrical irregularities. In June 2025, I received notification through the INFINITI app regarding a major engine recall involving engine bearing failure concerns affecting my vehicle. I brought the vehicle to Harte INFINITI for inspection regarding the recall and my electrical concerns. During that visit, dealership personnel acknowledged there were multiple vehicles experiencing similar engine bearing issues related to the recall. Despite my concerns, I was told the vehicle was “safe to drive” because no diagnostic codes were present at that time. The problems continued to worsen over time. On February 26, 2026, during a routine oil change shortly after expiration of the basic warranty, I was presented with approximately $2,600 in recommended repairs despite previously being told there were no issues with the vehicle. Most recently, the vehicle developed Forward Emergency Braking (FEB) malfunction warnings and Lane Assist malfunction warnings involving critical driver assistance and collision-avoidance systems. These warnings raised serious concerns regarding the safe operation of the vehicle because they involve systems designed to help prevent collisions and maintain vehicle control. I was concerned that these systems could fail unexpectedly while driving, potentially increasing the risk of an accident or injury to myself, passengers, or others on the roadway. The vehicle was returned to the dealership for inspection, where I was presented with an additional repair estimate exceeding $4,600 along with diagnostic charges. Despite the active safety-system malfunction warnings, I was again advised that the vehicle was safe to drive.

NHTSA ID

11738589

Incident

May 13, 2026

I purchased my vehicle 4.25. soon after I noticed lights flickering. I was notified shortly after my car was part of the major recall. I brought it in, they said no engine bearings, car is ok, they did not acknowledge the lights because there was no code. I was due for an oil change a few months later and the dealer gave me a 2600.00 estimate for repairs. soon after the FEB light and the lane assist malfunctions. emergency brake malfunctions are DANGEROUS AND UNSAFE .I have made numerous calls to infiniti in the meantime to initiate a buy back. I take the car to Infiniti, now i have. 4376.00 estimate.I have only had this vehicle 13 months. it was a CPO. They assume no responsibility and refuse to buy back. There are numerous complaints with the 2021 qx50 all are the same. This vehicle is not reliable, this company is not reputable. something needs to be done. my car has visited the dealer 3xs and everytime , more money. they know this is a problem- I am now stuck in a vehicle that was sold knowing it was not reliable or safe

NHTSA ID

11738125

Incident

Jul 15, 2025

The front driver-side door on my 2021 Infiniti QX50 appears to have a faulty latch, hinge, or door ajar sensor issue. The vehicle repeatedly displays a “door open/door ajar” warning even when the door is fully shut and latched. The warning can sometimes be triggered or worsened by leaning on the door or applying light pressure, which suggests movement in the latch or hinge assembly. The issue also occurs while making left turns, where the warning activates as if gravity or vehicle movement is pulling the door slightly outward. This raises concern that the door latch may not be fully securing the door during normal driving conditions. This creates a safety concern because the vehicle may not properly recognize the door as securely closed while driving. There is concern that the latch assembly may not be functioning correctly or could fail unexpectedly. The issue also creates distraction while driving due to warning messages and alerts appearing intermittently. There were warning messages prior to the issue becoming more noticeable, specifically repeated “door open” alerts despite the door appearing fully closed. The issue appears consistent with reports involving faulty or misaligned door latch assemblies and/or door ajar switch malfunctions on Infiniti QX50 vehicles. At this time, the vehicle has not yet been fully repaired or confirmed by a dealer. The problem can be reproduced intermittently by closing the door normally and applying slight pressure or leaning against the door from inside or outside the vehicle, as well as during left-hand turns while driving.

NHTSA ID

11737328

Incident

Apr 27, 2026

The contact owns a 2021 INFINITI QX50. The contact stated while operating the vehicle at an undisclosed speed, she stated she heard a loud sound coming from the motor, she pulled over and attempt to restarted the vehicle but it would not turn on. The vehicle was towed where it was diagnosed that the vehicle engine oil had metal shavings in the oil, the vehicle was brought in for regular maintenance and a recall repair. The vehicle engine was replaced under NHTSA Campaign Number: 25V437000 (ENGINE AND ENGINE COOLING) however, after the repair, the issue had reoccurred. The manufacturer was notified of the failure. The failure mileage was 95,193.

NHTSA ID

11735660

Incident

May 4, 2026

Mileage

95,193 mi

CERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label” may be needed. HINT: Certification Label = FMVSS (Federal Motor Vehicle Safety Standards) label. These items may be available from Infiniti by request if certain criteria are met. This bulletin lists the criteria and provides an application form for such replacements. · The “VIN Plate/Label” (metal plate or vinyl label) is attached to the instrument panel or body on the driver side at the base of the windshield (see Figure 1). · The “Certification Label” (vinyl adhesive label) is located on the lower area of the driver side B-Pillar (see Figure 1).

IF YOU CONFIRM The client states that either the rear hatch is inoperative, or the rear hatch closes after opening only a small amount, AND DTC B2426-23 for “SPINDLE SENSOR LH” and/or DTC B2427-23 for “SPINDLE SENSOR RH” is stored, AND/OR There is a growling type noise from the rear hatch area when opening/closing the rear hatch. · DTC B2426-23 for “SPINDLE SENSOR LH” and/or DTC B2427-23 for “SPINDLE SENSOR RH” may also be stored. HINT: If any DTC other than B2426-23 and/or B2427-23 is stored, this bulletin does not apply. ACTION Replace ONLY the spindle unit that is confirmed to be setting one of the DTCs listed above and/or causing the growling noise. Do NOT replace both spindle units when diagnosis leads to replacement of only one. HINT: Rear hatch spindle units are not hydraulic systems. If a rear hatch spindle unit appears to be leaking, this is normal drainage of water (rain, car wash, condensation) and design intended water management. Do not replace spindle units for suspected leaking. IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to successfully completing this repair.

AEB WARNING LIGHT IS ON WITH WARNING MESSAGES DISPLAYED ON COMBINATION METER APPLIED VEHICLES: 2015-2024 Q50 (V37) 2015-2018 Q50 Hybrid (HV37) 2017-2022 Q60 (CV37) 2015-2019 Q70 (Y51) 2015-2018 Q70 Hybrid (HY51) 2019-2024 QX50 (J55) 2022-2024 QX55 (FJ55) 2015-2021 QX60 (L50) 2022-2024 QX60 (L51) 2015-2019 QX60 Hybrid (L50H) 2015-2024 QX80 (Z62) SERVICE INFORMATION The AEB system is designed to turn itself OFF during driving conditions (e.g., rain, snow, fog, etc.) that obstruct its sensors. This behavior is normal, and no repairs should be performed. When the AEB system performs an intentional shutdown, the customer may state the following:  The ICC stopped working while driving,  The AEB/FEB warning light is ON, or turned ON, while driving (Figure 1),  The message “Unavailable Front Radar Obstruction” or “Forward Driving Aids Temporarily Disabled Front Sensor Blocked See Owner's Manual” has displayed while driving (Figure 2). AND  DTC C1A16, C1A16-97, C2582, or C2582-97 is the ONLY DTC stored. Figure 1 Figure 2 Forward Driving Aids Temporarily Disabled Front Sensor Blocked See Owner’s Manual

DTC B00A0-00 STOREIF YOU CONFIRM DTC B00A0-00 (OCCUPANT DETECTION SENSOR UNIT) is stored, AND OCS zero point reset cannot be performed, (continued on the next page)D

TELEMATICS (IVC) SERVICE INFORMATION Vehicles equipped with factory telematics system HINT:  If the client experiences Wi-Fi hotspot related concerns only, DO NOT replace the TCU. Have the client contact the AT&T Support line at 1 (888) 719-7242.  See ITB12-011 for models built before those listed above. SERVICE INFORMATION The APPLIED VEHICLES are equipped with a wireless communication device called a Telematics Communication Unit (TCU). The TCU communicates with the Infiniti Data Center to provide various security and convenience services. This bulletin contains important service procedures that must be performed properly in order to set-up and maintain the telematics system for the APPLIED VEHICLES.  An Order of Completion table has been provided on the next page that lists the steps required to successfully configure a TCU after it has been replaced.  A CHECK-OFF SHEET has been provided on page 16. Print and check off steps as they are completed. Staple the completed CHECK-OFF SHEET to the repair order.

TELEMATICS CONTROL UNIT RESET AFTER AUTOMATIC COLLISION NOTIFICATION SERVICE INFORMATION The Telematics Control Unit (TCU) has the ability to send an automatic collision notification when the vehicle is involved in an accident. Once an automatic collision notification is performed, the function becomes disabled and the TCU must be reset to re-enable the automatic collision notification function. Some models will store DTC B2E1B-97 for “Automatic eCAll locked” as “CURRENT” when this function is disabled. This bulletin describes how to reset the TCU after an automatic collision notification has been performed. For models with B2E1B-97 for “Automatic eCAll locked” set as “CURRENT”, complete the SERVICE PROCEDURE starting on page 2, and then erase DTCs after confirming the TCU condition is “UNLOCK”.