2010 MINI Cooper

The dealer refused to perform the required FRM recall inspection and denied the recall without providing any of the federally required documentation. I was forced to pay out‑of‑pocket for the FRM module replacement even though my VIN is listed under the safety recall. MINI of Murray stated my FRM “failed,” but admitted they never opened the module, which is required to determine internal moisture intrusion. • The Service Manager stated they based their denial on “carpet and headliner moisture,” which is not part of the FRM recall inspection procedure. • I requested the FRM inspection report, photos, and the MINI Corporate denial code. I received none of these. • MINI Corporate Recall Team confirmed they had no documentation from the dealer and incorrectly stated that the module does not need to be opened. • Without a completed inspection uploaded to MINI Corporate, a denial code cannot be generated. • I was charged for the FRM replacement part, even though the recall should cover the repair if the module is affected. • The dealer only offered to waive a $149 programming fee. Safety Concern: The dealer failed to follow required recall procedures, failed to document the inspection, and denied federally mandated recall coverage without evidence. This violates recall protocol and leaves the safety defect unresolved. The module was replaced at my expense.

NHTSA ID

11713743

Incident

Jan 26, 2026

The vehicle is experiencing repeated failure of the Footwell module (FRM), a known defect acknowledged by MINI/BMW. During the two years I have owned the vehicle, the FRM has required four separate reflashes due to recurring malfunctions. The failure causes loss of proper power window operation, including the passenger window reversing or rolling down unexpectedly, and loss or malfunction of other body electrical functions controlled by the FRM. Headlamps will not turn off, resulting in a dead battery and electrical/intermittent dash light surges. The FRM failed again after a software reflash, which is a documented trigger for FRM internal memory corruption. MINI/BMW issued and Extended Limited Warranty for FRM failure, acknowledging this defect; however, I received the official notice after the warranty period had already expired, leaving no opportunity to repair the defect while covered. This failure affects safe operation of the vehicle, including the inability to properly secure windows and maintain normal electrical functionality. The issue is not due to wear or misuse, but an internal electronic defect recognized by the manufacturer. The repeated nature of the failure and reliance on reflashing demonstrate the defect was never fully resolved. I am reporting this issue to document the repeated failures, late manufacturer notification, and ongoing safety-related electrical system issues. I purchased the vehicle with 86,000 miles. It now has 100,000, well below the criteria for the LW. In the 14,000 miles and two years I have owned and driven it, it has required four FRM reflashings. Had I known about the Extended Limited Warranty, I would have had BMW repair it under said warranty. That wasn't possible because I received notice of the known failure after the ELW expired.

NHTSA ID

11709416

Incident

Jan 7, 2026

Engine issues Engine leaks over heating seal gasket Timing bell Engine missed firing

NHTSA ID

11671223

Incident

Dec 15, 2024

Passenger Airbag sensor is off even when passenger is in the seat and airbag should be on.

NHTSA ID

11662967

Incident

Mar 15, 2025

On Thursday I was driving my 2010 Mini Cooper S with 75,000 miles on it and there was a total and sudden power outage on the high way. I was able to get to the breakdown lane and had it towed. My mini certified garage ran the computer on it and the car started right up. It was due for an inspection so we did an oil and filter and put on some new tires. No issues were found and car was running well. We picked it up on Friday and Saturday morning after a short drive I was parking and smoke started pouring out from behind the steering wheel. I ran inside a coffee shop for help and they asked if there were flames. I went back out and opened the car door and there was loud noise and the hood was in flames. The entire dash was melted, the hood had a hole burned in it and with the fire rescue interventions the car was a total loss. No one was injured.

NHTSA ID

11660568

Incident

May 10, 2025

The passenger airbag with seat belt icon is always indicating no one is in the seat or not buckled. The alert icon for the lighting is also on and we have replaced bulbs and still won’t work and the windows at times just randomly stops would have to unplug battery for it to reset for the windows only. I just bought this car and have registered since. Was told there was several recalls with the same issue I am experiencing. Please include my car for the proper recalls so I can have a safe reliable vehicle for my family.

NHTSA ID

11649639

Incident

Mar 21, 2025

The contact owned a 2010 Mini Cooper S Hartop. The contact stated that while driving at 25 MPH with the two sunroofs open, the vehicle caught fire. There were flames underneath the rear of the vehicle. There were no warning lights illuminated. The contact opened the hood and threw baking soda on the flames but sustained burns to her hands and face, and medical attention was provided. The neighbors had used a fire extinguisher to put out the fire. The fire department was able to extinguish the fire. The airbags did not deploy. A police report was filed. There was no crash. The vehicle was previously taken to an independent mechanic who replaced the footwell control module. The vehicle was towed to a tow lot. The contact received notification of NHTSA Campaign Number: 23V337000 (Electrical System); however, the part to do the recall repair was not yet available. The local dealer was not contacted. The vehicle was not diagnosed or repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. Parts distribution disconnect. The failure mileage was approximately 130,000. The insurance deemed the vehicle a total loss.

NHTSA ID

11644761

Incident

Feb 25, 2024

Mileage

130,000 mi

In an attempt to resolve persistent rough running engine issue, mechanic discovered that the timing chain guides failed (broke apart) and that plastic pieces of the guides migrated into the engine oil system.

NHTSA ID

11638633

Incident

Jan 3, 2025

Control Unit PDC Return

The Footwell Module (FRM) limited warranty for defects in materials and / or workmanship has been supplementarily increased to 15 years / 186,000 miles as determined from the original first in-service / delivery date.

While performing a 12-Volt battery jump start, disconnect, or replacement, vehicle test, and/or programming procedure- the MINI Footwell Module (FRM) may become unresponsive. As a result, one or more of the following vehicle electric system-related issues may occur: Headlights including the high beams, and/or taillights are not turning on or off Interior lights are not turning on Turn indicators are not working Instrument cluster indicator lights stay on The IHKA climate control system is not working Power windows are not working Folding mirrors are not working, and/or a Functional remote-control key FOB will not unlock and lock the doors

The Footwell Module (FRM) limited warranty for defects in materials and / or workmanship has been supplementarily increased to 15 years / 186,000 miles as determined from the original first in-service / delivery date.

Cavity protection applied to underside of the hood is leaking out onto the wheel arch trim and grille.

MINI electrical systems have continued to develop over the past few years. As a result, the demand on the batteries has increased. Breakdowns due to an empty battery or problems in the vehicles electrical system can have various causes, most of which are not due to the battery itself. For this reason, a battery replacement will permanently eliminate the problem only in the rarest of cases. The energy diagnosis test module helps to localize these causes. This document covers important information for the dealer on how to handle “discharged battery” complaints. Without performing the energy diagnosis test plan, the root cause of a discharged battery cannot be identified. In order to properly repair the vehicle the first time, it is very important that the diagnostic test plan is performed to completion; with all results taken into consideration.