2013 Ford Edge Brakes Problems

The contact owns a 2013 Ford Edge. The contact stated that while driving approximately 30 MPH, the brake pedal was inoperative. The contact stated that the vehicle drove for several yards, and the contact was unable to reach the parking brake. The vehicle was shifted into park(P) to attempt to stop the vehicle. The contact stated that the vehicle crashed into the shrubs in front of the window at an independent mechanic shop, causing the vehicle to come to a stop right before almost crashing into the shop window, which resulted in minor damage to the front bumper. No warning lights were illuminated. The air bags were not deployed. An independent mechanic diagnosed the vehicle and stated that the brake pads and rotors needed to be replaced. The vehicle was repaired; however, the failure persisted. The vehicle was taken to another independent mechanic, where it was diagnosed and determined that the brake booster module needed to be replaced. The vehicle was repaired; however, the failure persisted. The contact researched and was made aware of an unknown recall; however, the VIN was not included. The failure had occurred on several occasions. There were no injuries sustained. A Police report was not filed. The manufacturer was notified of the failure. The failure mileage was approximately 78,000.

NHTSA ID

11755254

Incident

Jul 7, 2026

Mileage

78,000 mi

I am submitting this letter to report a serious safety defect involving the brake system on my 2013 Ford Edge (VIN: [XXX]). The vehicle is experiencing a brake failure consistent with known ABS/HCU pump issues that have affected similar Ford Edge model years. On XXX, the vehicle was inspected at Randall Reed’s Planet Ford 635 in Garland, Texas. Service Advisor Luis Rodriguez confirmed the brake concern and provided a repair estimate of $3,500. The dealership indicated that the failure is related to the ABS/HCU system. The symptoms include: A spongy brake pedal Inconsistent brake pressure Reduced braking effectiveness Increased stopping distance Unpredictable brake response These symptoms match those described in Ford Recall 16C10, which addressed ABS/HCU pump failures on certain 2012–2014 Ford Edge vehicles. Although my VIN is not included in the recall, the failure pattern is identical and presents a clear safety hazard. I have contacted Ford Motor Company multiple times, including through executive escalation channels, but I have not received a response or assistance. Given the nature of this defect and its similarity to a previously acknowledged safety issue, I believe this may indicate a broader pattern that warrants investigation. I respectfully request that NHTSA review this matter to determine whether the existing recall should be expanded to include additional VINs or model ranges affected by the same ABS/HCU defect. Thank you for your attention to this safety concern. I am available to provide additional documentation, including the dealership diagnosis, repair estimate, and service notes. Sincerely, [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

NHTSA ID

11744053

Incident

Apr 15, 2026

The brakes on my 2013 Ford Edge failed with no notice. Luckily I was able to coast into a parking lot to get stopped. Even pushing the brake pedal to the floor will not stop the car. We immediately and safely took the car to our local repair shop who confirmed we needed 2 ABS parts to fix the car. That was Oct, 2025 and as of today (June 10, 2026)the parts are still not available to order. I have checked with 3 Ford dealers in 3 states and all say the same thing. They can't order the parts to fix my car and say over 1,500 are on back order. The car is undriveable with no brakes and creates a major safety risk. I have heard some dealers got Ford to provide a rental car. It is becoming a financial burden not having a car to drive for 10 months and Ford doesn't seem to have put out any recall or offer any help.

NHTSA ID

11743198

Incident

Oct 12, 2025

The contact owns a 2013 Ford Edge. The contact stated that while driving at 25 MPH, the brakes failed, and the vehicle coasted to the side of the road. There was no warning light illuminated. The contact stated that the failure was recurrent. The dealer was notified of the failure, but repairs were pending due to parts unavailability. The manufacturer was not made aware of the failure. The failure mileage was approximately 226,424.

NHTSA ID

11743194

Incident

Oct 12, 2025

Mileage

226,424 mi

I have replaced all brake components except abs motor. After researching online this vehicle has same issues as stated with other models . Brake pedal goes to floor after spending $3500!

NHTSA ID

11736115

Incident

Apr 3, 2026

I am reporting a safety issue involving a 2013 Ford Edge Sport AWD related to progressive brake failure. The affected components include the brake booster and master cylinder. The vehicle remains available for inspection upon request. In mid-2025, the vehicle developed a gradual loss of braking capability. The brake pedal required increasing force over time to bring the vehicle to a stop. Because the failure developed progressively rather than suddenly, the severity of the issue was not immediately apparent. At the time, the vehicle was primarily driven by my teenage son, a new driver, who continued operating the vehicle by pressing the brake pedal harder to compensate. This created a significant safety risk, as the vehicle did not reliably stop under normal braking conditions, increasing the risk of collision. The issue was confirmed by an independent mechanic, and repairs required replacement of the brake booster, master cylinder, and related components. The vehicle was later discussed with a Ford dealership; however, no warning of coverage or recall applicability was identified at that time. There were no clear warning lights or dashboard messages indicating brake system failure prior to the issue. The primary symptom was a progressive increase in required pedal force. After the repair, I learned that brake booster failure is a known issue for this vehicle platform and has been the subject of prior manufacturer service campaigns. I am concerned that this type of gradual brake degradation may not be recognized by drivers, particularly inexperienced drivers, and could result in unsafe operating conditions. The vehicle has also experienced repeated rear differential failures. Replacement parts are no longer manufactured by Ford, requiring use of used components with unknown condition and lifespan, further affecting vehicle reliability and safe operation. I have attached a receipt for the second time purchasing and replacing the rear differential.

NHTSA ID

11733777

Incident

Jun 9, 2025

The contact owns a 2013 Ford Edge. The contact stated that while driving at an undisclosed speed, after being cut off by another driver, the contact attempted to make an emergency stop; however, while the brake pedal was depressed, the brake pedal went to the floorboard, extending the braking distance. The vehicle failed to stop as intended, increasing the risk of a crash. The dealer was notified of the failure, but the vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was 125,000.

NHTSA ID

11732440

Incident

Dec 1, 2023

Mileage

125,000 mi

Back up Camera goes in and out, it's flips upside down and do wired things , it also say call dealership, the picture sometimes be in reverse , and brake light stays on have to pump brake in order for it to go off.

NHTSA ID

11730604

Incident

Jan 26, 2026

Breaks went out on car.started out only when I hit a bump I’d loose them… turn car off and pump them back… now they are just gone! Replaced pads rotors calipers, now changing master cylinder.. from what I’ve read that won’t help but have to try! They should really put a recall out for this!

NHTSA ID

11724021

Incident

Oct 17, 2025

The brake booster went out first, replaced the brake booster and master cylinder, 2 calipers, brake pads, and rotors. The next option was to replace the brake lines. The problem was not solved; the calipers still locked up.

NHTSA ID

11716415

Incident

Nov 1, 2025

I have a 2013 FORD Edge that the ABS module has gone out deeming the vehicle unsafe to drive. We have spoken to several FORD dealership team members and have all stated that the part should be recalled and the part is unavailable until sometime next year or later. We were told by FORD customer service, that in order to escalate the issue, then we needed to take to a dealership. We dropped the car off and never heard back from anyone and finally after many attempts to contact the dealership, I was finally able to get a team member on the line. They then tell us until we pay the diagnostic fees, they can't do anything. We were never told that from the start of the initial call and are back to square one. The car has no anti-lock brakes and is deemed unsafe to drive, please assist in anyway possible.

NHTSA ID

11712517

Incident

Jan 21, 2026

The ABS Control Module failed in my 2013 Ford Edge. I no longer have anti-lock brakes and my wife does not feel safe driving the car. I talked to a number of different Ford Dealerships and every service technician I talked to told me they don't know how this issue is not a recall as it is happening so often that the part is back ordered by a year. I had the problem confirmed by in independent service center and was informed to bring to a Ford Dealership. The vehicle is now at a Ford Dealership awaiting diagnosis but they all said they know what the problem is and they can't get the part. There are multiple warning lamps going off when you start the vehicle. ABS warning lamp, service advancetrac lights and brake warning lamps. This issue just popped up and we brought to an independent service center to get fixed and they were aware of this issue and told me that you can't get the part and to contact Ford. They also told us that if you push the brakes too hard it could cause them to lock up which is a huge safety concern and now my wife will not drive the vehicle and I can not sell it to anyone like that so we are stuck. Please help.

NHTSA ID

11711907

Incident

Jan 10, 2026

This is on a 2013 Ford Edge with Adaptive Cruise Control. The brakes failed and went completely to the floor, putting the driver/passengers at danger along with other vehicles in the vicinity. The ABS control module with HCU is the part that failed. Ford part # CT4Z-2C405-A. Per the dealership and per Ford, this part is now obsolete and unavailable, which means the vehicle is currently unsafe to drive and unusable. Ford does not have any plan at the moment to correct this issue.

NHTSA ID

11711271

Incident

Nov 10, 2025

The brake booster had a recall but it should have never just have been the booster. The brake system on this is dangerous. I had the booster replaced and the valve got stuck in the HCU and cause brakes to fail. This has been a common issue amongst people and yet this is not a recall. The dealership just quoted me $3200. That's absurd for an issue thats obviously a common huge problem for people

NHTSA ID

11710105

Incident

Dec 30, 2025

Soft brake pedal that goes to floor

NHTSA ID

11708452

Incident

Dec 18, 2025

While driving the car approaching a stop the brake pedal suddenly went almost all the way to the floor. Had to press the brake multiple times to come to a complete stop. It is unsafe when traveling in traffic and unable to slow down fast enough to stop the vehicle which can cause an accident. The vehicle has not been inspected. Contacted a mechanic and described the issue and stated this sound like a master cylinder issue and it is unsafe to drive. This issue did not present warning lights or message to indicate there was anything wrong. We have read many similar complaints online. We believe Ford should fix this issue.

NHTSA ID

11705205

Incident

Dec 10, 2025

While driving the car approaching a stop the brake pedal suddenly went almost all the way to the floor. It stayed that way for the next couple of days before going back to a fully functioning brake pedal. Months later it happened again this time without repairing itself. We took it to a local mechanic as well as the local Ford dealership twice. Their computer did not detect anything wrong and yet when the service rep tried the brakes they went clear to the floor! So we had them update the computer software in the car since we never had any warning lights about this issue. The local mechanic as well as the Ford dealership suspect it is the HCU unit within the ABS system. The problem is there are no replacement parts available to remedy the problem. We have read many similar complaints online. We believe Ford should fix this issue.

NHTSA ID

11704020

Incident

Sep 15, 2025

I purchased this vehicle used in August 2025 from the estate of a friend's relative. The records show it was meticulously maintained and no recall notices have been unaddressed. The prior owner used it infrequently and it still has just under 90k miles. There were no major engine issues when my local repair shop (over 12 years and 3 vehicles) inspected all systems, and the vehicle passed for PA state inspection and emissions. However, driving more, I noticed that the brakes would intermittently become "mushy" or "hard" and overall less responsive. I needed to use a lot of force to fully stop over a longer distance. There was also a hissing noise while braking and sometimes the cabin air fan would blast on suddenly. Then, while stopped at a red light and applying the brakes, the engine shut off and check engine light came on. My mechanic detected O2 sensor codes P2195/P2197 indicating "stuck lean." But nothing about the brake booster, and so we cleaned it up a bit and tried to get more of an understanding of the issue. Now I know that the compromised engine vacuum from the booster air leak is impacting the fuel/air balance. Extremely unsafe. This has now happened MANY times while I try to get a good diagnosis and help. It's scary, and makes city driving very challenging. On multiple occasions I feared I would hit other vehicles or would have to "creep" at a light to alleviate the airflow issues from braking. If I have to be at a light for more than a moment, I will put the car in park and foot off the brake. I'd rather risk being honked at or hit, than have the engine dying on me in traffic. When I was able to get to a dealership, I was informed that it was the brake booster. The first thing I found when looking up that part for the 2013 Ford Edge was the recall. The dealership says my VIN was not covered, but it seems more than coincidence that this is the exact problem, now confirmed by the dealership. The part is faulty, and should be replaced by OEM.

NHTSA ID

11703726

Incident

Dec 4, 2025

The contact owns a 2013 Ford Edge. The contact stated that while driving approximately 5 MPH and depressing the brake pedal while exiting a parking lot, the brake pedal went to the floorboard. The contact pumped the brake pedal to stop the vehicle. The contact stated there was no warning light illuminated. The vehicle was not taken to a local dealer or an independent mechanic. The vehicle was not diagnosed or repaired. The manufacturer was not informed of the failure. The failure mileage was approximately 130,000.

NHTSA ID

11695824

Incident

Oct 25, 2025

Mileage

130,000 mi

The 2013 Ford Edge began giving trouble after sitting at an intersection or pulling out of the driveway to enter major traffic. The vehicle would hesitate to accelerate as though it is running out of gas but it isn't out of gas. When you continue pressing on the accelerator it would jerk then accelerate. We barely escaped being hit from the rear because the vehicle died while pulling out onto the feeder, whereupon I struggled to pull into a nearby gas station. The brake pedal is generally stiff but can be depressed, however, in other instances, when braking the brake pedal sometimes becomes hard to depress but becomes easier after the car is driving for a long stretch, such as the freeway. When you start the car the panel is normal but as you begin driving the Check Brake System failure light begins to appear in Red and the ABS light and the oil light. Similar incidents as the previously mentioned situations have happened on numerous occasions.

NHTSA ID

11689481

Incident

Sep 9, 2025

The contact owns a 2013 Ford Edge. The contact stated that while driving at a slow speed and taking a right turn, while attempting to depress the brake pedal, the brake pedal felt mushy. The contact stated that excessive force was required to depress the brake pedal. The contact stated that the brake pedal had lost pressure for a moment. There was no warning light illuminated. The local dealer was contacted; however, the vehicle was not diagnosed because the VIN was not under an open recall. The vehicle was not repaired. The contact referenced Customer Satisfaction Program: 13N02, as a possible cause for the failure. The manufacturer was notified of the failure. The approximate failure mileage was 135,000.

NHTSA ID

11689463

Incident

Jul 1, 2025

Mileage

135,000 mi

The contact owns a 2013 Ford Edge. The contact stated that while driving approximately 40 MPH, the brake pedal was depressed too slowly for traffic; however, the brake pedal was soft and went to the floorboard. The vehicle was steered to the right and rolled down into a ditch to avoid crashing into the vehicle in front. The contact stated that the engine was still running. There was no warning light illuminated. The vehicle was turned off and restarted to reset the braking system; however, the brake pedal was still soft. There was no damage to the vehicle, and the contact was able to drive out of the ditch and back to the residence. The vehicle was not yet taken to a local dealer or independent mechanic to be diagnosed or repaired. The contact stated that in 2024, the vehicle was repaired under Customer Satisfaction Program: 13N02 - Brake Booster (Service Brakes, Hydraulic). The manufacturer was informed of the failure. The failure mileage was approximately 110,000.

NHTSA ID

11684569

Incident

Sep 2, 2025

Mileage

110,000 mi

Replaced Master Brake Cylinder and Brake Booster due to hard Braking. Also, ABS Control lights are illuminated. Codes show failed ABS module creating safety issue when fast breaking. Brake pushes down to the floor periodically Repair is very costly to fix.

NHTSA ID

11682876

Incident

Jun 21, 2025

The contact owns a 2013 Ford Edge. The contact stated there was an abnormal air hissing sound coming from the vehicle while depressing the brake pedal. There was no warning light illuminated. In addition to the sound, the brake pedal was firm, requiring extra force on the brake pedal while attempting to stop the vehicle. The contact called a dealer, and an appointment was scheduled for a diagnostic test to be performed on the vehicle. The vehicle was not repaired. The manufacturer was notified of the failure, and the contact was informed that the VIN was not under recall. The manufacturer referred the contact to the NHTSA Hotline to report the failure. The failure mileage was approximately 146,000.

NHTSA ID

11680347

Incident

Jul 27, 2025

Mileage

146,000 mi

Stiff brake and hard shift

NHTSA ID

11680209

Incident

Jul 29, 2025