EQUIPMENT
2011 Forest River Salem
Recalls, owner-reported complaints, investigations and safety data
Data refreshed
Overview
Our database contains 2 NHTSA owner-reported complaints for the 2011 Forest River Salem, most frequently naming the body & structure, brakes and suspension categories. 3 safety recalls have been issued covering this model year; and 1 manufacturer communication is on file.
Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.
Complaint activity over time
When owners filed reports about this model year
Not enough dated records to plot a meaningful trend — 2 months of data.
What owners report
Complaints grouped by the component NHTSA recorded
- Body & structure133.3%
- Brakes133.3%
- Suspension133.3%
Percentages are of component mentions. A single complaint can name more than one component, so these do not sum to the total complaint count.
Safety recalls
3 campaigns cover this model year
Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.
Check a VIN on NHTSA.govSUSPENSION:FRONT:SPRINGS:LEAF SPRING ASSEMBLY
EQUIPMENT:RECREATIONAL VEHICLE/TRAILER:LPG SYSTEMS:WATER HEATER
Recent owner complaints
Reports submitted to NHTSA, shown in the owner's own words
THE MAIN FRAME OF THE TRAILER HAS FAILED DOE TO A GROSS ERROR OF THE MECHANICAL DESIGN IN MAKING THE FRONT CROSSMEMBER TOO THIN TO SUPPORT THE WEIGHT OF THE TRAILER. ADDITIONALLY, THE REQUIREMENT TO USE A LOAD LEVELER BY THE DEALER AS RECOMMENDED BY THE MANUFACTURER INCREASES THIS LOAD TO THE POINT THAT THE CALCULATED SAFETY MARGIN OF THE CROSSMEMBER THAT SUPPORTS THE TONGUE IS 1:1. THE CROSSMEMBER MATERIAL IS STANDARD A36 STEEL WITH A NOMINAL THICKNESS OF .1 INCHES AND IS BENT IN THE SHAPE OF A C CHANNEL, WELDED TO THE FRONT OF A 10 INCH I-BEAM WHICH COMPRISES THE MAJORITY OF THE LOAD BEARING STRUCTURE OF THE MAIN FRAME. THE FRONT CROSSMEMBER IN QUESTION IS USED AS A SUPPORT POINT FOR THE UNDERSLUNG TONGUE THAT IS WELDED TO THE LOWERMOST POINT OF THE I BEAM AND THE FRONT CROSSMEMBER CREATING A FULCRUM RATIO OF APPROXIMATELY 2.896 : 1. THE LEVER BEING THE TONGUE TUBING ITSELF THAT IS THEN PUSHED UPWARD INTO THE FRONT CROSSMEMBER WITH A FORCE OF 2400 POUNDS AS CALCULATED USING A MEASURED TONGUE WEIGHT OF 830 POUNDS WITH THE VEHICLE COMPLETELY UNLOADED OF ALL CARGO AND WASTEWATER AND WITH EMPTY PROPANE CYLINDERS. THIS FORCE IS SUPPORTED BY A TONGUE COMPRISED OF A 2X6 RECTANGULAR TUBING WITH A NOMINAL WALL THICKNESS OF .098 INCHES THAT HAS DEFORMED LONGITUDINALLY AND EXPANDED LATERALLY ACROSS THE SHORT AXIS DIRECTLY UNDER THE FRONT CROSSMEMEBER. THE FRONT CROSSMEMBER HAS THEN RECEDED INTO THE UNDERBELLY OF THE CAMPER AND BEGUN A VERTICAL CRACK THAT HAS COMPROMISED THE HANDLING CHARACTERISTICS OF BOTH THE TOW VEHICLE AND THE TRAILER AT SPEED. ADDITIONALLY, THE ELECTRICAL BRAKING SYSTEM HAS FAILED DUE TO OTHER DESIGN FLAWS IN THE PROTECTION OF WIRING WITHIN THE WHEEL AND THE DESIGN OF THE MECHANICAL ACTUATION THAT IMPINGES ON THE WIRING HARNESSES FREEDOM OF MOVEMENT WHILE BEING ACTUATED. *TR
- NHTSA ID
- 10447180
- Incident
- Aug 31, 2010
- Mileage
- 5,000 mi
TL* THE CONTACT OWNS A 2011 FORREST RIVER SALEM. THE CONTACT STATED WHILE DRIVING 65 MPH, ANOTHER DRIVER ALERTED HER THAT THE REAR OF THE VEHICLE WAS ON FIRE. THE VEHICLE WAS MANEUVERED TO THE SHOULDER. THE CONTACT EXTINGUISHED THE FIRE, WHICH WAS LOCATED ON THE REAR AXLE. THE VEHICLE WAS TOWED TO AN INDEPENDENT REPAIR SHOP AND THE CONTACT WAS INFORMED THAT THE REAR AXLE MELTED DUE TO A BEARING FAILURE. THE VEHICLE WAS REPAIRED. THE APPROXIMATE FAILURE MILEAGE WAS 1,000.
- NHTSA ID
- 10435453
- Incident
- Oct 28, 2011
- Mileage
- 1,000 mi
Manufacturer communications
A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.
EQUIPMENT
This is a document that describes how to take the required photos to assess the slideroom mechanism for adjustment and function.
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.
Compare model years
Complaint and recall counts across every year of this model
| Year | Complaints | Recalls | Investigations | Issue Index |
|---|---|---|---|---|
| 2027 | 0 | 1 | 0 | — |
| 2026 | 0 | 6 | 0 | — |
| 2025 | 4 | 8 | 0 | — |
| 2024 | 4 | 10 | 0 | — |
| 2023 | 2 | 5 | 0 | — |
| 2022 | 12 | 7 | 0 | — |
| 2021 | 4 | 10 | 0 | — |
| 2020 | 12 | 7 | 0 | — |
| 2019 | 5 | 11 | 0 | — |
| 2018 | 6 | 9 | 0 | — |
| 2017 | 5 | 9 | 0 | — |
| 2016 | 9 | 8 | 0 | — |
| 2015 | 8 | 5 | 0 | — |
| 2014 | 1 | 4 | 0 | — |
| 2013 | 2 | 2 | 0 | — |
| 2012 | 3 | 1 | 0 | — |
| 2011Viewing | 2 | 3 | 0 | — |
| 2010 | 1 | 2 | 0 | — |
| 2009 | 0 | 1 | 0 | — |
| 2008 | 3 | 3 | 0 | — |
| 2007 | 0 | 2 | 0 | — |
| 2006 | 0 | 2 | 0 | — |
| 2005 | 0 | 2 | 0 | — |
| 2004 | 3 | 3 | 0 | — |
| 2003 | 8 | 3 | 0 | — |
| 2002 | 1 | 1 | 0 | — |
| 2001 | 2 | 1 | 0 | — |
| 2000 | 0 | 1 | 0 | — |
| 1999 | 0 | 1 | 0 | — |
| 1998 | 0 | 1 | 0 | — |
| 1997 | 0 | 1 | 0 | — |
Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.