2005 Hyundai XG350

The contact owns a 2005 Hyundai XG350. The contact stated upon taking the vehicle to the dealer for an oil change, she was informed that the subframe was severely corroded and had holes and cracks in the subframe. The vehicle was not repaired. The dealer informed the contact that the failure was associated with NHTSA Campaign Number: 09V124000 (Suspension). The manufacturer was notified of the failure and informed the contact that the vehicle could not be repaired under the recall as the VIN was not included. A case was opened. The failure mileage was approximately 136,000.

NHTSA ID

11492790

Incident

Nov 7, 2022

Mileage

136,000 mi

The under body frame and oil container rotted and the frame came apart. Problem was noticed with oil change. I noticed that all of these models years were recalled except 2005 ... why not? They were virtually the same car. I want a repair or a rebate for this manufacturer problem since I have less then 100000 miles on this 15 year old car.

NHTSA ID

11457918

Incident

Mar 22, 2022

The contact owns a 2005 Hyundai XG350. The contact stated that while the vehicle was parked, there was a strong fuel odor coming from the vehicle. In addition, there was fuel leaking from the rear of the vehicle. The vehicle was not diagnosed or repaired. The VIN was not included in NHTSA Campaign Number: 12V345000 (Fuel System, Gasoline, Fuel System, Diesel, Fuel System Other). The manufacturer was not notified of the failure. The approximate failure mileage was 157,000.

NHTSA ID

11455005

Incident

Apr 14, 2017

Mileage

157,000 mi

1) The vehicle idle is too high. It jerks forward every time I'm at a stop then I want to go forward. I have almost ran into the back of other cars while waiting at a stop sign. 2) The bolts and Subframe is coming detached from the car. It has been confirmed by dealership and franchise auto repair places (2 of them) that the car motor is knocking around and the subframe is loose! I've currently spent over $2000 alone in repairs on the suspension, rack and pinion & oil leak & manifold intake issues since purchase in 2019. Besides the check engine light turning on and off, there was no prior warning of the subframe and/or it's bolts being rusted out prior to purchase or prior to mechanics telling me about this dangerous repair needing done. Why is the 2001-2004 XG350 have recalls on this but not the 2005 year model that is exactly the same specs and materials used as the 2004????????????????????

NHTSA ID

11447389

Incident

Sep 15, 2020

THE ENGINE CRADLE IS RUSTING OUT IT MAY AFFECT THE STEERING CONTROL AND MAY CAUSE A MAJOR ACCIDENT. THE CONTROL ARMS ARE MOUNTED TO THE ENGINE CRADLE.

NHTSA ID

11382915

Incident

Dec 7, 2020

Mileage

62,000 mi

MY SUBFRAME RUSTED STRAIGHT THROUGH LIKE THE OLDER MODELS OF THE SAME CAR DESCRIBED I WAS TOLD THE PROBLEM OVER MANY YEARS NOW BUT I TOOK MY CAR IN RECENTLY TO GET AN ALIGNMENT AND THAT'S WHEN IT WAS DISCOVERED THAT IT HAD RUSTED ALL THE WAY THROUGH AND WAS TOLD IT IS NOT SAFE OR USUAL THE CONSUMER STATED THE VEHICLE HAD THE SAME RECALLED SUBFRAME, BUT THE VEHICLE WAS NOT INCLUDED IN THE RECALL. *JS

NHTSA ID

11288949

Incident

Aug 5, 2019

Mileage

150,000 mi

TL* THE CONTACT OWNS A 2005 HYUNDAI XG350. WHILE THE VEHICLE WAS UNDERGOING ROUTINE MAINTENANCE BY AN INDEPENDENT MECHANIC, IT WAS DISCOVERED THAT THE PASSENGER SIDE FRAME WAS ROTTING AWAY. THE MECHANIC STATED THAT THE VEHICLE SHOULD NO LONGER BE DRIVEN. THE MANUFACTURER STATED THAT THERE WERE NO RECALLS ON THE VEHICLE AND NOTHING COULD BE DONE. THE DEALER WAS NOT CONTACTED. THE FAILURE MILEAGE WAS 105,000.

NHTSA ID

11208269

Incident

May 14, 2019

Mileage

105,000 mi

MECHANIC TELLS ME THAT THE FRAME ON MY XG350 2005 IS VERY BADLY RUSTED AND UNSAFE TO DRIVE AT 100K MILES. ALL OTHER YEARS OF THIS VEHICLE HAVE A RECALL ON THIS ISSUE!! WHY NOT THE 2005 MODEL? OBVIOUSLY A MANUFACTURER'S PROBLEM. MANY OTHERS REPORT THE SAME ISSUE. ALSO, THE AIR BAG WARNING LIGHT IS ON. I HAVE HAD THIS FIXED ONCE AND IT WAS EXPENSIVE. PROBLEM IS REPORTED MANY TIMES BY OTHER OWNERS.

NHTSA ID

11183647

Incident

Jun 18, 2018

Mileage

100,000 mi

The National Highway Traffic Safety Administration (NHTSA) has issued an urgent safety advisory regarding dangerous, counterfeit driver‑side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN), that have been identified in U.S. vehicles following prior crashes, theft, or non‑certified airbag replacements. These inflators are not approved for use, may rupture during deployment, and have caused serious injuries and fatalities. Please see attached announcement, provided by NHTSA, for more details.

The National Highway Traffic Safety Administration (NHTSA) has identified the presence of substandard and dangerous driver’s-side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN). These inflators were not supplied, approved, or authorized by the vehicle manufacturers and have primarily been found in vehicles that previously experienced a crash and underwent airbag replacement using non-genuine parts. These dangerous inflators have ruptured during deployment, posing a serious risk of injury or death due to metal fragments entering the vehicle cabin. To date, Hyundai is aware of three people who have died while driving a Hyundai vehicle with one of these substandard replacement airbag inflators that deployed in what likely would have been a survivable crash. NHTSA has issued a public advisory urging vehicle owners and service professionals to have vehicles inspected if there is reason to believe that a non-genuine replacement airbag may have been installed. Vehicles with salvage or rebuilt titles, prior airbag deployments, or unknown repair histories may present a higher risk. NHTSA strongly cautions against self-inspection by vehicle owners and recommends inspection by trained technicians.

This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.

This bulletin contains information about the proper removal of the windshield wiper blade protective cover on all models. If the protective cover is not removed correctly, there is a possibility of the rubber insert and rail spring becoming partially separated on the inner side of the wiper blade, which could lead to poor wiping performance and/or possible scratching of the windshield glass. Follow the procedure in this bulletin to properly remove the windshield wiper blade protective cover on all new wiper blades.

This bulletin provides important checkpoint guidelines when performing engine oil and filter change services.

Hyundai applies a Paint Protection Film (PPF) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can become clouded under the PPF. These spots are the result of moisture trapped between the PPF and the paint.