2020 Mazda CX-5

The vehicle's component that fails seems to be the transmission locking up in first gear after accelerating from a stop. During wet conditions, the car will fish tail and the traction control will kick in.

NHTSA ID

11775025

Incident

Oct 31, 2026

I am filing a defect complaint regarding a severe drivetrain safety hazard on my 2020 Mazda CX-5 (currently at 62,800 miles). The automatic transmission has begun slipping and hesitating during acceleration, specifically producing a high-pitched chirping/squeaking noise during the 3rd-to-4th gear upshift. This issue is fully documented by the manufacturer under Technical Service Bulletin TSB 05-005/23. Mazda's internal bulletin admits that the root cause is an inherent manufacturing defect where the torque converter lockup clutch friction material degrades prematurely, contaminating the transmission fluid with fine iron powder and causing internal clutches to slip. This transmission slippage causes unpredictable power delivery and hesitation when merging into active traffic, creating an immediate safety hazard. Mazda Corporate (Case File: 00504052) has acknowledged the defect but refuses to cover the repair in full because the vehicle is 2,800 miles past its powertrain warranty, attempting to pass thousands of dollars in repair costs for a known factory defect onto the consumer. The car has already been diagnosed by Mazda Dealership at Walkers Renton Mazda, WA. The NHTSA needs to investigate this widespread Skyactiv transmission defect and force a mandatory safety recall. Please check TSB 05-005/23.

NHTSA ID

11774751

Incident

Oct 5, 2026

Car stalls and 3 warning lights flash on the dashboard- “front radar sensor system malfunction”, “forward smart city brake support malfunction”, “smart brake system malfunction” and check engine light turns on. Car still drives but gas pedal and brake pedal don’t seem to work as well. Have to pull over, turn engine off and restart. Check engine light still on but other warning lights disappear. Check engine light turns off overnight. Has happened twice in the last month. Concerned about safety as gas and brake pedals seem off until turning the engine off and on again. Concerned about brakes failing. When brought to dealership, warning lights had all turned off and dealership found nothing wrong with car.

NHTSA ID

11773545

Incident

Sep 3, 2026

When coasting into a parking space the car suddenly accelerated. At a high rate of speed, the car jumped the curb and planting area of median separating the parking area. The car struck 2 other cars on the other side of the median. The car directly in front of my car was moved several feet. My air bag deployed.

NHTSA ID

11767211

Incident

Sep 10, 2026

I purchased a brand new Mazda CX5 in 2020 that now has 46,000 miles on it. It is experiencing the known “ghost touch” issue in which the entertainment system and screen displayed in the center of the dashboard turns itself off and on, changes settings, shuts off navigation while driving, changes the radio from FM to AM, changes the time zone, drops hand free phone calls, initiatives hands free phone calls, does not allow me to control the volume, freezes, and more, while driving without me touching the system or even when it isn’t on. It is incredibly disruptive and distracting when driving and is a major safety problem. There was a class action lawsuit for this issue for 2016-2020 Mazda CX5s that expired in 2025 in which Mazda was required to pay up to $1750 for repairs. I was not having this issue at that time and have been told Mazda will only pay a portion to correct this issue. Considering how popular this vehicle is and the likelihood of this being cost prohibitive for many people to pay for themselves this has the potential to be a major safety problem throughout the country.

NHTSA ID

11756022

Incident

Aug 10, 2026

Cylinder Head has failed at 53,000 miles. Mazda has a technical service bulletin acknowledging that this is a common occurrence with this part. They have an extended warranty for the turbo engine but not for the standard engine. Looking through online forums, there are hundreds of not thousands of these issues for this model year and engine. Mazda has clearly acknowledged there is an issue and should repair these manufacturing defects that are not normal wear and tear items.

NHTSA ID

11745274

Incident

May 22, 2026

The infotainment display screen on my 2020 Mazda CX-5 has suffered a severe hardware failure resulting in un-commanded inputs, commonly known as "ghost touching." While driving at highway speeds, the touchscreen constantly registers phantom touches. It actively hijacks the vehicle's computer system and cuts out my Apple CarPlay connection during trips. This morning, the ghost touching randomly turned the Apple Maps navigation volume up to the absolute maximum level without warning. This intense, sudden noise causes driver shock and distraction while in motion, creating an immediate risk of a wreck. The vehicle currently has fewer than 29,000 miles.

NHTSA ID

11743236

Incident

Jun 10, 2026

Read windshield just shattered while driving down the highway. No object hit the windshield. On I-95 near PHL airport, near exit for Rt 420

NHTSA ID

11742819

Incident

Jun 8, 2026

Subject: Update – Campaign Warranty Claim Response Enhancements – Modules Not Repaired for Certain Campaigns Dear Mazda Dealer Colleagues, On October 28, 2026, a change was implemented in the warranty claim response screen to provide precise information for all campaigns requiring module programming or module replacement subject to the LECS system software checks. As previously announced, some claims were automatically rejected with the Edit code JN1 – One or More Modules Are Not Updated when submitting a campaign warranty claim. This response was based on the session file received from MDARS or MDARS II at the dealership and the VIN on the claim submitted. This change provides additional Related Information which enhances the edit code information. This information allows the dealer to correct the error without contacting Warranty or Hotline. Edit code JN1 now contains the actual module name and the software version that was collected from the car and what the minimum required software needed to be for the claim. Using this information, the technician can now identify the exact error or errors and correct the concern.

This bulletin supersedes the previously issued bulletin(s) listed below. The changes are noted below in Red. 09-038/24 08/08/24 NOTE: This service information is NOT applicable to 7th generation Mazda vehicles because the odometer data is stored in the BCM. DESCRIPTION In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer’s responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers.

DESCRIPTION If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices. Examples: 1. Devices connected to the DLC-2 (battery discharge/DTC stored) 2. Devices plugged into the 12V outlet 3. GPS tracking device (engine no start/battery discharge) 4. Dash cam (DTC stored) 5. Non-certified USB cable (Apple Carplay™/ Android Auto™ will not connect) 6. Over-sized wheels/tires (incorrect GPS location) 7. DTC C0023:14 8. Decorative trim and/or cover on the START/STOP ENGINE button

This bulletin supersedes the previously issued bulletin(s) listed below. The changes are noted in Red text. 01-012/22 10/06/22 DESCRIPTION Some vehicles may exhibit accumulation of dried coolant (1) around the water pipe (2). This is caused by a gap between the housing and pipe due to a press fitting during the manufacturing process. The accumulated coolant is solidified and plugs the gap in high temperature environment and the seepage is stopped and does not progress. This is normal and does not require a part replacement, clean off the dried coolant from around the pipe with a wire brush. REPAIR PROCEDURE 1. Verify the customer concern. 2. If the above condition is experienced, remove the accumulated coolant around the pipe (1) with a wire brush etc. NOTE: Perform the procedure on the vehicle. No need to remove the water pipe and hoses.

This SA supersedes the previously issued SA(s) listed below. The changes are noted in Red. SA-061/25 12/17/25 DESCRIPTION If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices. Examples: 1. Devices connected to the DLC-2 (battery discharge/DTC stored) 2. Devices plugged into the 12V outlet 3. GPS tracking device (engine no start/battery discharge) 4. Dash cam (DTC stored) 5. Non-certified USB cable (Apple Carplay™/ Android Auto™ will not connect) 6. Over-sized wheels/tires (incorrect GPS location) 7. DTC C0023:14 8. Decorative trim and/or cover on the START/STOP ENGINE button Example 1: Some electrical devices connected to the DLC-2 connector by insurance or mobile phone companies may cause: Battery discharge. The device may disrupt the CAN system battery saver mode. • IDS/MMDS will not communicate with the vehicle due to poor DLC-2 connection. The aftermarket device may cause DLC-2 female terminals to spread open.

This SA supersedes the previously issued bulletin(s) listed below. The changes are noted below in Red. SA-027/26 04/16/26 DESCRIPTION The Mazda DCA-8000 is required for all warranty battery testing. If the Mazda DCA-8000 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test Mazda vehicle batteries and to generate a Warranty Code. NOTE: A Warranty Code is required for warranty claim submission Battery Identification (Mazda batteries have 2 rating types) 1. JIS (Japanese Industrial Standard): JIS codes are six-digit alpha-numeric markings (excluding i-STOP batteries e.g. Q-85, S-95) molded into the top of the battery to identify a battery by the capacity (amps), dimensions, and battery terminal type. Vehicles manufactured in Japan come from the factory with a JIS rated battery. NOTE: Replacement batteries may use a CCA rating. If so, use the CCA rating listed on the battery. REPAIR PROCEDURE 1. Perform appropriate repair to vehicle. If needed, use the Battery Diagnostics of the DCA-8000 to test the charging and starting systems by following the on-screen instructions for entering the appropriate information. Refer to the Mazda DCA-8000 Instruction Manual for more information.