RoadVitals

2014 Mazda Mazda3

Recalls, owner-reported complaints, investigations and safety data

Data refreshed

Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
138
Latest Jul 9, 2026
Safety recallsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
4
Latest Jul 14, 2023
InvestigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
11
5 injuries, 0 deaths reported

Overview

Our database contains 138 NHTSA owner-reported complaints for the 2014 Mazda Mazda3, most frequently naming the electrical, brakes and fuel system categories. 4 safety recalls have been issued covering this model year; and 881 manufacturer communications are on file.

Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.

What owners report

Complaints grouped by the component NHTSA recorded

Percentages are of component mentions. A single complaint can name more than one component, so these do not sum to the total complaint count.

Safety recalls

4 campaigns cover this model year

View all 4

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
23V487000

BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

Jul 14, 2023
236,100 units potentially affected
The defect: Mazda North American Operations (Mazda) is recalling certain 2014-2018 Mazda3 and 2016-2021 CX-3 vehicles. The rearview camera image may not display properly by showing a flickering or distorted image.
The risk: A rearview camera that does not display properly can reduce the driver's rear view, increasing the risk of a crash or injury.
The remedy: Dealers will inspect and replace the rearview camera, as necessary. In addition, dealers will install a wiring harness fastening seal. All repairs will be performed free of charge. Interim notification letters, notifying owners of the safety risk, were mailed September 13, 2023. Final owner letters for affected models and model years in the states of CT, MA, MD, NJ, NY, PA and VA were mailed August 14, 2024. The remaining owner notification letters will be mailed at a future date, anticipated on or before May 1, 2025. Owners may contact Mazda customer service at 1-800-222-5500, Option 6. Mazda's number for this recall is 6023G.
Mazda North American OperationsManufacturer number 6023GView on NHTSA.gov
17V393000

PARKING BRAKE

Jun 22, 2017
227,814 units potentially affected
The defect: Mazda North American Operations (Mazda) is recalling certain 2014-2015 Mazda6 and 2014-2016 Mazda3 vehicles. Water could possibly enter the brake caliper causing the parking brake actuator shaft to corrode and possibly bind.
The risk: If the parking brake actuator shaft binds, the parking brake may not engage or disengage fully. If the parking brake does not engage properly, the vehicle may move unexpectedly if it is parked on a slope, increasing the risk of a crash.
The remedy: Mazda will notify owners, and dealers will check the parking brake actuator shafts, replacing any that are corroded, free of charge. Remedy parts are currently unavailable. Interim notices informing owners of the safety risk were mailed August 24, 2017. Owners will receive a second notice when remedy parts become available. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 1217F.
Mazda North American OperationsManufacturer number 1217FView on NHTSA.gov
16V684000

FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY

Sep 22, 2016
17,484 units potentially affected
The defect: Mazda Motors North American Operations (Mazda) is recalling certain model year 2014-2016 Mazda3 vehicles manufactured January 4, 2014, to September 18, 2015. The fuel tank of the affected vehicles may have been improperly handled during manufacturing and, as a result, the welded attachment of the Inlet Check Valve (ICV) may fail and allow fuel to leak.
The risk: A fuel leak in the presence of an ignition source increases the risk of a fire.
The remedy: Mazda will notify owners, and depending on the tank lot number, dealers will inspect the ICV weld, replacing the fuel tank, as necessary, free of charge. The recall began November 1, 2016. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 0116I.
Mazda North American OperationsManufacturer number 0116IView on NHTSA.gov

Recent owner complaints

Reports submitted to NHTSA, shown in the owner's own words

View all 138
Brakes
Filed Jul 9, 2026

The contact owns a 2014 Mazda Mazda3. The contact stated that when attempting to secure the vehicle, the electric parking brake failed to engage after pulling up the hand lever. The contact related the failure to NHTSA Campaign Number: 17V393000 (Parking Brake); however, the VIN was not included in the recall. The vehicle was previously taken to a dealer for an unrelated recall repair, but the parking brake failure was not addressed or resolved. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was 70,000.

NHTSA ID
11749418
Incident
Jul 1, 2026
Mileage
70,000 mi
Fuel system
Filed Jun 14, 2026

The fuel tank leaks fuel at a full tank and smells of gas in the cabin until about 3/4 tank. Car was dripping a large puddle of gas inside of a parking garage. Problem has been reproduced by my mechanic even after replacing the fuel pump retaining ring. It has not been inspected by the manufacturer or police. CEL did not come on until recently reporting a very small EVAP leak. Inside the car and the surrounding area would smell of gasoline even if there was no leak in the ground.

NHTSA ID
11744056
Incident
May 30, 2026
Brakes
Filed Jun 12, 2026

The contact's nephew owns a 2014 Mazda Mazda3. The contact stated that while parked on several occasions, the parking brake failed to engage, and there was no resistance. The vehicle was not diagnosed or repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 72,000.

NHTSA ID
11743735
Incident
Feb 1, 2025
Mileage
72,000 mi
Driver assistance
Filed Mar 25, 2026

The rear backup sensors no longer work and did not give any indication they stopped working. They do not detect cars driving up from behind when driving or switching lanes or objects or people behind the car anymore when you reverse. This happened without any notice or warning indications.

NHTSA ID
11727114
Incident
Jul 1, 2025
AirbagsSeat belts
Filed Feb 27, 2026

Airbag warning symbol on dashboard flashes with or without passenger seated in front seat.

NHTSA ID
11721073
Incident
Nov 3, 2025
Visibility
Filed Jan 19, 2026

Blend door actuator linkage will not allow for heat to be turned on, will blow cool/cold air, have had it looked at and the gear teeth will not stay in line with on another to be able to turn when the knob inside the car is turned. I was told that this may be a recall but do not see anything listed, but that it is a known problem for this model of mazda 3 and ford expiditions

NHTSA ID
11711857
Incident
Oct 15, 2025
Fuel system
Filed Oct 17, 2025

Gas tank is leaking from the TOP. I could smell gas after a refill (and refilling a portable tank) that I thought must have been a spill I hadn't noticed, and the smell faded. But then it happened again at the next refill, and I knew it wasn't just a spill. Brought it to our trusted mechanic who said that the TOP of the tank was rusted out (wow!)(so, not from road salt) and needs to be replaced. Not cheap, but worse, I'd been driving around in a very hazardous situation that Mazda knows happens. No warning lights, no recall. Thanks, guys. Here's a thread about this being a common issue: https://www.mazda3revolution.com/threads/2014-mazda3-fuel-tank-replacement.245797/

NHTSA ID
11694054
Incident
Sep 22, 2025
ElectricalEngine
Filed Sep 26, 2025

Odometer Fraud. The contact purchased a 2014 Mazda Mazda3. The contact stated that the vehicle was making an abnormal growling sound. The check engine warning light was illuminated. The contact discovered a mileage discrepancy after the purchase. The vehicle was a private sale. At the time of purchase, the vehicle mileage was 140,000. The vehicle was taken to the local dealer, where it was diagnosed and determined that the motor mounts needed to be replaced. It was later discovered that the Title mileage was 197,687.

NHTSA ID
11689873
Incident
Sep 15, 2025
Mileage
197,687 mi

Manufacturer communications

A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.

PF-26-02

SUSPENSION

Supersession between B60S-34-300G/350G and B60S-34- 300H/350H. Please be advised that the G-level and H-level control arms are not interchangeable. The G-level part cannot be used to repair a vehicle built with the H-level. The H-level part can be used to repair a vehicle built with the G-level, but the ball joint retainer (d- Code 34-552) has been eliminated.

SA-041-26

ELECTRICAL SYSTEM; ENGINE

This SA supersedes the previously issued SA(s) listed below. The changes are noted in Red. SA-061/25 12/17/25 DESCRIPTION If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices. Examples: 1. Devices connected to the DLC-2 (battery discharge/DTC stored) 2. Devices plugged into the 12V outlet 3. GPS tracking device (engine no start/battery discharge) 4. Dash cam (DTC stored) 5. Non-certified USB cable (Apple Carplay™/ Android Auto™ will not connect) 6. Over-sized wheels/tires (incorrect GPS location) 7. DTC C0023:14 8. Decorative trim and/or cover on the START/STOP ENGINE button Example 1: Some electrical devices connected to the DLC-2 connector by insurance or mobile phone companies may cause: Battery discharge. The device may disrupt the CAN system battery saver mode. • IDS/MMDS will not communicate with the vehicle due to poor DLC-2 connection. The aftermarket device may cause DLC-2 female terminals to spread open.

01-008-26

POWER TRAIN

This bulletin supersedes the previously issued bulletin(s) listed below. The changes are noted in Red. 01-008/23 06/05/23 Some vehicles may exhibit rattling noises from the engine compartment and oil leakage from the drive belt auto tensioner. This may be caused by insufficient sealing at the drive belt auto tensioner damper when the auto tensioner fully operates under both high ambient temperature and high load conditions. To eliminate this concern, the shape of the drive belt auto tensioner damper has been changed. REPAIR PROCEDURE If the tensioner is found to be "No Good" after completing the Drive Belt Auto Tensioner Inspection, replace it with a modified part according to the instructions on MGSS online:

SA-031-26

STRUCTURE:BODY

DESCRIPTION Some vehicles may require the replacement of a damaged VIN plate or vehicle certification label. To obtain a replacement VIN plate (bulkhead-mounted and visible through the lower-left area of the windshield), contact DAG (Dealer Assistance Group) using VIN Plate Request Form available on One Mazda. To obtain a replacement vehicle certification label (located on the B􀀀pillar or front door), contact your assigned DSM (District Service Manager) to place the order. If DSM contact information is not available, refer to the Dealer & Field Contact Directory.

SA-029-26

ENGINE; POWER TRAIN; SERVICE BRAKES

This Service Alert supersedes the previously issued SA listed below: The changes are noted in Red. SA-011/24 02/12/24, 06/06/24, 07/29/24 DESCRIPTION Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers. SCHEDULED MAINTENANCE Refer to the applicable Workshop Manual or Owner's Manual for vehicle -specific manufacturer scheduled maintenance. Workshop Manual - Refer to section 00-00 SCHEDULED MAINTENANCE. Owner's Manual - Refer to section 8 Maintenance and Care. b. Note: Please refer to the information below outlining the services not included in Mazda's Factory Scheduled Maintenance: IMPORTANT: Recommending fluid flushes when not necessary can lead to customer confusion and dissatisfaction. Fluid flushing for preventive maintenance purposes is strongly discouraged, unless otherwise specified in a published procedure (Owner’s Manual, Workshop Manual, Technical Service Bulletin, etc.).

SA-021-26

ELECTRICAL SYSTEM; STRUCTURE:BODY

This Service Alert supersedes the previously issued SAs and bulletin(s) listed below: The changes are noted below in red. SA-010/23 02/09/23 DESCRIPTION Some customers may experience one or more electrical malfunctions after a vehicle body repair. A newly painted fender stay (2) may be causing a poor front harness (1) ground connection. The front fender stay (2) newly painted surface at ground point (3), where attachment bolt (4) is seated, may create a poor front harness ground connection. NOTE: DO NOT paint ground point (3) attachment bolt (4) is seated. NEWLY INSTALLED FRONT FENDER STAY NOTE: CAUTION: If the bolt (4) contact area (3) is painted when the front fender stay (2) is newly replaced, it could cause a malfunction in the PCM. Before painting a newly replaced part, protect the bolt (4) contact area (3) with masking tape (5) as shown in the figure.

Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Compare model years

Complaint and recall counts across every year of this model

Mazda Mazda3 by model year
YearComplaintsRecallsInvestigationsIssue Index
2026100—
2025710—
2024123056.9
2023120049.4
2022240038.4
2021491042.1
2020322047.6
2019746050.3
20181074052.8
2017832047.7
20161036052.2
20151304056.9
2014Viewing1384055.5
20131171143.6
20122261141.7
20111322157.2
20106863151.4
20091154156.7
20083033155.4
20072223158.0
20061662049.8
2005973053.5
20041453051.6

Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.