RoadVitals

2008 RAM 3500

Recalls, owner-reported complaints, investigations and safety data

Data refreshed

Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
4
Latest May 9, 2020
Safety recallsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
1
Latest Oct 13, 2016
InvestigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
0

Overview

Our database contains 4 NHTSA owner-reported complaints for the 2008 RAM 3500, most frequently naming the steering, suspension and driver assistance categories. 1 safety recall has been issued covering this model year; and 181 manufacturer communications are on file.

Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.

What owners report

Complaints grouped by the component NHTSA recorded

  • Steering337.5%
  • Suspension225.0%
  • Driver assistance112.5%
  • Electrical112.5%
  • Exterior lighting112.5%

Percentages are of component mentions. A single complaint can name more than one component, so these do not sum to the total complaint count.

Safety recalls

1 campaign cover this model year

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
16V739000

ELECTRICAL SYSTEM:ALTERNATOR/GENERATOR/REGULATOR

Oct 13, 2016
74,811 units potentially affected
The defect: Chrysler (FCA US LLC) is recalling certain model year 2011-2014 Dodge Charger Police vehicles, 2007-2013 RAM 3500 Cab Chassis, 2008-2013 RAM 4500 and 5500 Cab Chassis, and 2013 RAM 2500 and 3500 vehicles. The affected vehicles have a 220 amp alternator that may suddenly fail.
The risk: If the alternator fails, the vehicle may stall without warning, increasing the risk of a crash. There is also the possibility that the alternator may short circuit, increasing the risk of a fire.
The remedy: Chrysler will notify owners, and dealers will replace the alternator with a revised alternator, free of charge. The recall began on December 23, 2016. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S68.
Chrysler (FCA US LLC)Manufacturer number S68View on NHTSA.gov

Recent owner complaints

Reports submitted to NHTSA, shown in the owner's own words

SteeringSuspension
Filed May 9, 2020

VEHICLE EXPERIENCED THE "DEATH WOBBLE", REPLACED THE STEERING GEAR BOX STABILIZER/BRACE, DID NOT FIX THE PROBLEM, THIS HAPPENS WHEN GOING HIGHWAY SPEEDS AND YOU ENCOUNTER BUMPS, THE VEHICLE SHAKES VIOLENTLY AND YOU HAVE TO PULL OVER AND SLOW DOWN TO STOP THE SHAKING, THE OTHER FIXES ARE VERY EXPENSIVE, AND SHOULD BE A RECALL. NUMEROUS OTHER PEOPLE HAVE EXPERIENCED THE SAME ISSUES WITH THESE VEHICLES.

NHTSA ID
11323961
Incident
Apr 2, 2020
Mileage
150,000 mi
Steering
Filed Mar 18, 2019

MY COMPLAINT IS WITH THE FRONT END OF MY 2008 DODGE RAM 3500 QUAD CAB DUALLY DIESEL. I HAVE BEEN GETTING THE DEATH WOBBLE AFTER REPLACING EVERYTHING IN THE FRONT END EXCEPT THE DRAG LINK STEERING LINK. I HAVE THE FACTORY "Y" TYPE AND WAS TOLD DODGE WAS REPLACING THEM WITH THE "T"STYLE. PLEASE ADVISE BEFORE I GET KILLED IN THIS THING. HIGHWAY BETWEEN 40 AND 65 I HIT A BUMP ANDTHE FRONT END STARTS JUMPING ALL OVER THE PLACE UNCONTROLLABLY UNTIL I COME TO AN ALMOST STOP.

NHTSA ID
11187461
Incident
Mar 6, 2019
Mileage
160,000 mi
Driver assistanceElectricalExterior lighting
Filed Oct 17, 2018

THE 4X4 ACTUATOR KEPT CLICKING IN AND OUT AND DAMAGED MY TRANSFER CASE WHERE I HAD TO PAY FOR A NEW ONE, NOW IT'S STARTING TO DO IT AGAIN. ALSO MY HEATER BLOWS COLD ON DIVER SIDE AND HOT ON PASSENGER SIDE. ALL SERVICES HAVE BEEN DONE BUT THE LIGHT KEEPS COMING ON AND OFF, SAYING I NEED TO HAVE IT SERVICED. HEAD LIGHTS AND DASH LIGHTS KEEP FLUCTUATING IN BRIGHT AND DEEMING.

NHTSA ID
11141032
Incident
Mar 15, 2014
Mileage
200,000 mi
SteeringSuspension
Filed Jan 10, 2018

TL* THE CONTACT OWNS A 2008 RAM 3500. WHILE DRIVING, THE TIE ROD FELL OFF ON THE PASSENGER SIDE OF THE VEHICLE. THE CONTACT DROVE TO FREMONT MOTOR CODY (3127 BIG HORN AVE, CODY, WY 82414), BUT THEY COULD NOT REPAIR THE VEHICLE. THE CONTACT REPLACED THE TIE ROD HIMSELF. THE MANUFACTURER WAS CONTACTED AND WAS UNABLE TO PROVIDE ASSISTANCE. THE APPROXIMATE FAILURE MILEAGE WAS 120,000.

NHTSA ID
11061931
Incident
Nov 1, 2016
Mileage
120,000 mi

Manufacturer communications

A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.

9100226

ELECTRICAL SYSTEM:WIRING

Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.

9100226

ELECTRICAL SYSTEM

Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.

9004009

POWER TRAIN

Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.

9004350

ENGINE AND ENGINE COOLING; POWER TRAIN

GEAR MOTOR, Transfer Case The gear motor assembly is shipped in AWD/2WD position. The transfer case needs to be positioned in AWD/2WD position to properly assemble gear motor to T-Case. Please reference Star Online publication S2121000003 for further details. Do not have the transfer case in in another position other than AWD/2WD and rotate the motor to align the bolt holes as this could result in damage to the gear motor.

9004350

ENGINE AND ENGINE COOLING

GEAR MOTOR, Transfer Case The gear motor assembly is shipped in AWD/2WD position. The transfer case needs to be positioned in AWD/2WD position to properly assemble gear motor to T-Case. Please reference Star Online publication S2121000003 for further details. Do not have the transfer case in in another position other than AWD/2WD and rotate the motor to align the bolt holes as this could result in damage to the gear motor.

S2121000003

POWER TRAIN

Transfer Case Gear Motor/Actuator Installation Guidelines.

Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Compare model years

Complaint and recall counts across every year of this model

RAM 3500 by model year
YearComplaintsRecallsInvestigationsIssue Index
2027000—
2026224056.1
2025365055.3
2024402060.7
2023175048.9
202218712261.7
2021629161.0
202011211262.3
201913414263.7
201878911467.6
201730413467.2
201613316367.3
201513616461.0
201420217461.1
201311418360.6
2012002—
2011002—
2010003—
2009321—
2008Viewing410—
2007610—

Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.