2000 Toyota 4Runner

The hole underneath frame is rusted into and there is a bunch of wielding done to it and it's very unsafe to drive and the car lot guy keeps saying he wants it back on the road

NHTSA ID

11549388

Incident

Sep 20, 2023

The frame is rusted almost in half a mechanic said it's not safe to drive it will kill someone. The car lot that is selling me the car said he can fix it but it's being held together by welds and c foam. He wants me to still pay for it. I've complained about not being able to drive over 45 without swaying badly and they keep doing stuff to it saying it's fixed and it's not. It's to dangerous to drive. I have a video of underneath but it won't let me upload it

NHTSA ID

11549059

Incident

Oct 1, 2023

We recently looked at this vehicle at Toyota of Ann Arbor car lot. After taking the vehicle to a private Professional Certified Car Inspector we were told that that the passenger side Frame had a catastrophic Crack that ran 7' from front to back and over the forward facing Rear Leaf Spring Shackle Support making the vehicle unsafe for any driving. They showed us the frame damage and showed us how wire mesh and foam spray had been used in an attempt to hide it. We were scared to drive it back to the dealer (we drove very slow). We informed them of the damage and they were very rude and asked us to leave. My only goal here is to insure that this vehicle is not put on the road were it could result in death or injury.

NHTSA ID

11515011

Incident

Mar 28, 2023

The contact owns a 2000 Toyota 4Runner. The contact stated that after disconnecting the battery from the vehicle, it was later discovered that the both the driver’s and passenger’s side doors and the hatch door could not be opened manually or remotely. The cause of the failure was not determined. The local dealer and manufacturer were notified of the failure, but no assistance was offered. The failure mileage was 200,000.

NHTSA ID

11514242

Incident

Mar 27, 2023

Mileage

200,000 mi

Section of frame broke and fell to the pavement. Vehicle bouncing and went off road causing damage to front driver side bumper, turn signal light housing, headlight. Extensive Back frame rusting has made vehicle dangerous. Frame has many soft spots. Both back shocks rusted and broken. Replace shocks but frame will eventually brake. This is my only vehicle. So, I will continue to drive and pray that this vehicle stays together and doesn't result in death. Front frame and suspension are also rusted and rusting. Please help !

NHTSA ID

11476396

Incident

May 23, 2021

The frame rusted and is available for inspection. My daughter was driving our 2000 Toyota 4Runner SR5 which I purchased new in 2000 when she noticed the truck started to wobble when she hit small bumps. I drove it to the garage the next day which is 2 miles from my house. It was doing the same for me. My mechanic went to put it up on the lift, he noticed that the frame rusted out. There was nothing he can do at this point. There are many complaints of the same issues with the 2000 Toyota 4Runners with the frames rusting out. If she was driving on the highway, this could have been a lot worse and possibly someone seriously injured or death. There were no warning lamps, messages, or other symptoms of the problem prior to the frame rusting out. The only one to inspect it was my mechanic.

NHTSA ID

11475964

Incident

Jul 14, 2022

Frame is rotted out. Mechanic lifted it on hoist and frame is rusted terribly and said not drivable.

NHTSA ID

11462846

Incident

Apr 29, 2022

The frame is rusted thru in many places that hold the rearend in the frame and along the side rails of this 4 Runner Toyota 2000, the suspionsion arm rusted and broke free from the frame.

NHTSA ID

11457414

Incident

Mar 2, 2022

To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.

The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.

Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.

Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to remove the RapgardTM protective film within 90 days from initial application.

Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid. Follow the Repair Procedure in this bulletin to clean vehicles that may have been subjected to contamination by airborne iron particles such as rail dust during rail transportation or extended storage near industrial areas.

To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.