2024 Toyota Venza

The contact owns a 2024 Toyota Venza. The contact stated that upon parking the vehicle, the vehicle unintendedly accelerated to 15 MPH, and the contact continued to depress the brake pedal. The vehicle came to a complete stop after crashing into the base of a light pole and a retaining wall. The front passenger’s side of the vehicle was damaged. The air bags failed to deploy. The contact was not injured. The vehicle was not towed. The message "BRAKES" was displayed. A Police report was not filed. The local dealer was contacted; however, the vehicle was not diagnosed. The VIN was not included in a recall. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was 14,500.

NHTSA ID

11750512

Incident

Jul 13, 2026

Mileage

14,500 mi

What component or system failed or malfunctioned, and is it available for inspection upon request? I purchased four tires from Belle Tires on April 1, 2026, 14 days ago (note: mileage at accident 10,776 vs mileage at tire purchase 10,360 or 416 miles of wear). On Wednesday, April 15th, I was about to change lanes after entering the Tri-State Expressway (route 294) going southbound from Half-Day Rd. (route 22), I had crossed the first two lanes without incident, and moving into the third lane, when I experienced a blowout of my driver’s-side rear tire. The car started a fishtail counter-clockwise spin and crossed the third and the fourth lanes (i.e., the far left lanes) before smashing into the concrete median, separating my Southbound lanes from the opposing traffic lanes. I have kept both the tire and rim in my garage. How was your safety or the safety of others put at risk? As I started sliding or spinning, I cannot honestly say, whether or not I hit the brakes or can really describe the spinning that occurred. As the rim of blowout tire was evenly torn up on its outer edge, I know that the tire was turning. All I can recall is hearing the car hit the concrete median twice. I know that it had to be counterclockwise since I started going southbound, and after the car came to a rest next to the median, I was facing southbound again. Has the problem been reproduced or confirmed by a dealer or independent service center? I took the tire on it’s rim to the Belle dealer who would not acknowledge a blowout, but he kept insisting that he is not an expert on crash interpretations. Has the vehicle or component been inspected by the manufacturer, police, insurance representatives or others? Allstate Insurance, Toyota used a Bosch representative to retrieve the Electronic Data Recording (EDR) information. I have copy of this report available for expert interpretation. No warnings were given prior to this blowout.

NHTSA ID

11746247

Incident

Apr 15, 2026

I heard loud sound then the tire of driver’s side front was blown out suddenly with warning alarm on the 210 east bound freeway on 10th of May, 2026 at 1:40PM, I stopped in the shoulder then called AAARoad service to change it to the spare tire. The service technician said that the tire has defect and blown out. I visited Toyota Pasadena to change the tire, the service representative suggested to claim the defect to Bridgestone personally because my mileage of car was only 33,416 and I have still warranty of this tire. I reported to Bridgestone but they didn’t do anything to follow up. Tire size is 225/55R29

NHTSA ID

11739187

Incident

May 10, 2026

The contact owns a 2024 Toyota Venza. The contact received notification of NHTSA Campaign Number: 25V595000 (ELECTRICAL SYSTEM). However, the part to do the recall repair was not yet available. The contact stated that while driving at an undisclosed speed, the screen displayed a black screen while the vehicle was in drive(D). The contact stated that the failure obstructed the driver from safely operating the vehicle. The contact stated that the failure was most predominant when the weather was cold. The local dealer was contacted and confirmed that the part was not yet available. The vehicle was not repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The failure mileage was unknown.

NHTSA ID

11712196

Incident

Jan 6, 2026

Last year my vehicle rear camera and sensor failed to which caused me to backup into a mailbox. I had brought it up after a car wash at the dealership and they said they didn't know about any recalls at the time. I recently saw the recall for this year and make and would like this to be investigated further. I also have an estimate for the damages that I can provide.

NHTSA ID

11702659

Incident

Dec 12, 2024

After applying the brakes in a sudden situation, the automatic emergency braking came on but the car didn't stop. The brake pedal was pushed all the way to the floor board but the car didn't stop and crashed into the vehicle in front. This happened once before but didn't end in a crash. This was a total brake failure.

NHTSA ID

11690439

Incident

Sep 29, 2025

-Issue with electrical system. Unable to access to connect services (APP, SOS). Contacted Toyota three times to let them know about this issue. -Collision Warning/Rear Cross Warning don't always operate. There is no sound or warning. -Occasionally, screen turns off completely when driving. -Navigation system is always confused and doesn't give proper directions. -Carplay not able to connect to phone sometimes. - -

NHTSA ID

11656854

Incident

Feb 20, 2025

When driving at night using low beams a shadow is cast by the headlights. The shadow is on the driver's side approximately 100 feet in front of the vehicle, at the 11:00 position. This gives the impression that someone or something is entering the path of the vehicle causing the driver to brake or swerve to avoid a collision. This endangers the occupants of the vehicle and others on the roadway. If the driver grows accustomed to this and "learns" not to pay attention to this area of his/her path it endangers those who enter this area.

NHTSA ID

11645248

Incident

Feb 2, 2024

RL: The supply of Smart Keys available for Toyota vehicles has been temporarily limited to one (1) on select models since October 2022 due to global semiconductor shortages impacting certain microchips. Affected vehicles have been delivered with only one Smart Key and a second mechanical key.

TI: TECHNICAL INSTRUCTIONS FOR 23TJ01 Second Key Delivery Program Multiple Models and Model Years

DP: The subject vehicles were delivered with only one (1) Smart Key on select models since October 2022 due to a global semiconductor shortage impacting certain microchips. The affected vehicles were delivered with one (1) Smart Key and a second mechanical key.

Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.

To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.

The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.