Owner-reported complaints naming the driver-assistance system, filed with NHTSA
Data refreshed
Reports naming forward-collision avoidance, lane keeping, back-over prevention, cruise control and related electronic driver-assistance systems. Every record below is an owner-reported complaint about the 2014 Ford Edge submitted to NHTSA — not a confirmed defect, not a recall and not a manufacturer bulletin. 62 reports on file name it.
Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.
The 25 most recent of 62, in the owner's own words
The backup camera works periodically. Over a year ago, I went to Fiesta Ford to complain but it would cost me over $1000 to repair the camera. Many rimes it will start to work and during my back up, the screen would go black. There were several times when this occurred where I almost backed into another car backing up at the same time. The message on the screen says camera currently not available.
The backup camera on my 2014 Ford Edge is upside down. At night, the picture is completely unrecognizable. This year should have been included in the recent recall.
The contact owns a 2014 Ford Edge. The contact stated that while reversing, the rear-view camera displayed a distorted image. The vehicle was taken to an independent mechanic, where it was diagnosed with a rear-view camera system failure. The contact was informed that the rear-view camera system needed to be replaced. The vehicle was not repaired. The contact referenced an unknown recall which had a similar failure description; however, the vehicle was not associated. The manufacturer was not made aware of the failure. The failure mileage was unknown.
The contact owns a 2014 Ford Edge. The contact stated that on several occasions for over a year, when the vehicle was shifted into reverse(R), the back over prevention image was turned upside down. The vehicle was taken to a dealer, but was not diagnosed or repaired. The manufacturer was not notified of the failure. The failure mileage was unknown.
The contact owns a 2014 Ford Edge. The contact stated that the rearview camera was working periodically while reversing. There were no warning lights illuminated. The contact called the local dealer, who confirmed there were no recalls associated with the VIN related to the failure. The vehicle was not diagnosed or repaired. Upon further research, the contact linked the failure to NHTSA Campaign Number: 25V572000 (Back Over Prevention). The manufacturer was contacted, who filed a claim and referred the contact to the BBB, who referred her to the NHTSA Hotline to report the failure. The failure mileage was approximately 100,000.
The contact owns a 2014 Ford Edge. The contact stated that while attempting to reverse, the rear-view camera displayed an upside-down image. Occasionally, the picture or the view was distorted. The vehicle was taken to a local dealer, where it was diagnosed, and the contact was informed that the camera was faulty and needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure. The approximate failure mileage was 194,000.
The backup camera has stopped working. Sometimes it appears fuzzy when the car is put into reverse, other times the screen is black and says I need to contact my local dealership. The screen can also stay that way after I place the vehicle back into drive for several minutes before it goes back to the accessory screen. This issue started out as just sometimes a problem and sometimes the camera would work fine. It is at the point now that it never works anymore. I also have had issues with the rear cross traffic sensors "detecting" things when the car is in reverse that aren't there. It can be very dangerous because you think something is behind the car that is not there and can cause the driver to slam on the brakes. This issue does not happen on a regular basis, just sometimes. The vehicle is available for inspection for all problems. None of the problems have been inspected by anyone professionally yet. A Dealership has not confirmed the issues either.
The contact owns a 2014 Ford Edge. The contact stated that the back over prevention camera intermittently failed to operate as needed. The contact stated that the failure was related to NHTSA Campaign Number: 25V572000 (Back Over Prevention); however, the VIN was not included. The local dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was not notified of the failure. The approximate failure mileage was 64,000.
Back up camera stopped working. Back up sensors either don’t work or will just beep when nothing is behind the car. Don’t have exact date it stopped working because it started working for 1 day and then stopped working again. It has been probably 8 or 9 months since it has worked.
The contact owns a 2014 Ford Edge. The contact stated that while shifted into reverse(R), the rear-view camera image was either black or displayed upside down. The contact stated that the failure was intermittent. There was no warning light illuminated. The contact had not taken the vehicle to a local dealer or independent mechanic. The vehicle was not diagnosed or repaired. The manufacturer was informed of the failure and referred the contact to the NHTSA Hotline to report the failure. The failure mileage was approximately 98,000.
The contact owns a 2014 Ford Edge. The contact stated that while attempting to decelerate and depressing the brake pedal, there was an abnormal grinding sound coming from the brakes. Additionally, the contact stated that the vehicle failed to detect other nearby vehicles as intended. The vehicle was taken to a local Pep Boys, where the rear rotors and brake pads were replaced. The contact stated that while driving at an undisclosed speed, several unknown warning lights illuminated. The vehicle was taken back to the same local Pep Boys, where the vehicle was diagnosed with a check engine, transmission, ABS, Cruise Control Module, and seat module failure. The local Pep Boys diagnosed the vehicle with an ABS module failure that impacted the performance of several other safety features. The vehicle was taken to a local dealer; however, the vehicle was not diagnosed or repaired because there was no recall associated with the VIN. The vehicle was not repaired. In addition, the contact related the failure to NHTSA Campaign Number: 16V733000 (Service Brakes, Hydraulic, Electronic Stability Control (ESC); however, the VIN was not included. The manufacturer was made aware of the failure. The failure mileage was approximately 110,000.
When I purchased my 2014 Ford Edge SEL from North Central Ford, I informed the dealership that the backup camera consistently displayed the error message: “Camera is unavailable, please contact your dealership.” This occurred every time the vehicle was placed in reverse. Additionally, the SYNC display would become unresponsive, disabling access to the phone, climate control, radio, and other settings. The dealership refused to fix the issue and instead offered to replace the entire SYNC system with an upgrade costing around $800. This issue has persisted since purchase in January 2018. The Ford Edge has significant blind spots, and the backup camera is essential for safe reversing. I recently discovered that Ford issued a recall for similar issues, but my model is not included—even though it clearly suffers from the same defect. I request that the 2014 Ford Edge SEL be included in the recall to address this safety-critical issue.
My vehicle started having a "spongy" pedal feel when I pushed on my brakes going to work and returning home. I was going to be taking my grandchildren to Branson, MO, on Thursday morning, [XXX], and was able to get Marvin Merritt, mechanic, to look at my vehicle before leaving to make sure we would be okay traveling. Marvin notified me that my brake booster needed replace and it was not safe to travel. I made other arrangements to go to Branson. When I got back I paid Marvin for services rendered and got my letter from the Ford Motor Company Dated March 2024. I took my letter, the invoice from Marvin Merritt and turned it into Friendly Ford Dealership / Service man, Derrick and he filed a claim for me and said he did not see any reason why they would deny my claim based on the information I turned in. I waited 4 week, calling weekly for updates, before being told my claim was being denied. Derrick gave me the following number to call 1-800-392-3673 and they stated they would not honor the warrenty because it was not fixed at a Ford Dealership. I asked for an email or mailing address so I could send my information to them and was denied. She stated she would give me a claim number which was case # [XXX]. and I shared the following information on the phone. 1.“I received Ford’s March 2024 letter stating that if my vehicle had exceeded 150,000 miles, coverage would continue through November 30, 2025. My vehicle had exceeded that mileage, so I relied on this written coverage.” 2.“I had the brake booster repaired on July 11, 2025—well within the coverage period Ford outlined. Despite this, my claim was denied.” 3.“I am requesting Ford to honor its written commitment and reimburse the cost of my repair. Given that this matter involves a brake system safety issue, I trust Ford will resolve this promptly. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
The contact owns a 2014 Ford Edge. The contact stated while reversing, the rearview camera image was black intermittently, and a message to contact the dealer was displayed. The vehicle was taken to the dealer, where the contact was informed that a fee would be charged for the repair. The vehicle was not diagnosed or repaired. The manufacturer was notified of the failure and referred the contact to the NHTSA Hotline for assistance. The failure mileage was unknown.
The contact owns a 2014 Ford Edge. The contact stated that the back over prevention camera was unintendedly turning on and off. The message “Camera Unavailable - Contact the Dealer” was displayed. There were no warning lights illuminated. The contact stated that the failure was related to NHTSA Campaign Number: 25V160000 (Back Over Prevention); however, the VIN was not included. The vehicle was taken to the local dealer but was not diagnosed or repaired. The manufacturer was contacted and referred the contact to the NHTSA Hotline. The failure mileage was approximately 60,000.
7/2/25-i was driving about 20 miles per hour when suddenly my car went into a type of limp/idle mode. It shut the car down to an idle, a wrench light came on my dash then the car started to shake. I coasted into a driveway and turned the car off. I turned it back on after 5min and it was fine. 7/16/25-I was driving about 30mph and all of a sudden my car goes into this idle mode again. I got the car to coast over into a turning lane. It lost power down to an idle, wrench came up on dash again then the car started to shake. I turned the car off and back on and it was fine. I’m very scared to drive my car bc I don’t know when this will happen again. It could be when I’m turning in front of another vehicle, driving on the expressway or just normal streets or if someone was behind me and wasn’t able to react appropriately bc my car goes into this idle mode so fast that I don’t know how to keep from having an accident myself. 7/17/25-I took it to a machanic and they hooked it to a computer but nothing showed up as being wrong. They drove it several times but they couldn’t get it to do what I’m explaining what it does. After researching the issue, I believe it may be my electric throttle body ETB that ford acknowledged was an issue and had a customer satisfaction program CPS (CSP 13N03) from Ford for ETB replacement on certain 2009-2013 ,.* Jels, sometimes extended into the early 2014 model. * Electronic Throttle Body Failure * Ford ETBs from this era are notoriously bad. * Carbon buildup, worn internal sensors, or electronic glitches cause the throttle to stick or respond erratically. * The PCM detects an unsafe throttle position → activates fail-safe mode → wrench light + jerking + no throttle. * You restart the car, and the ETB re-initializes until it fails again.
The contact owns a 2014 Ford Edge. The contact stated that while reversing, the back over prevention camera image was displayed upside down. The contact indicated that the failure had occurred after the battery was replaced. The cause of the failure was not yet determined. The manufacturer and local dealer were notified of the failure, but no assistance was offered. The failure mileage was 55,000.
The back up camera view is distorted, the image is upside down. This causes a visibility issue. I cannot use the camera to back up, I’m dependent on the side and rear view mirrors. This car has several blind spots that make using the mirrors difficult when backing up. I have nearly hit numerous cars.
Backup camera doesn't always display. Had a accident while backing up.
The contact owns a 2014 Ford Edge. The contact stated that while shifted into reverse, the rearview camera failed to display a clear review image. No warning light was illuminated. In addition, the contact stated that occasionally the digital screen displayed an upside-down image or a black screen. The vehicle was taken to a local dealer and the contact was informed that the back over prevention camera needed to be replaced. The vehicle was not repaired. The contact related to failure to an unidentified recall; however, the VIN was not included. The manufacturer was not made aware of the failure. The failure mileage was approximately 70,000.
The contact owns a 2014 Ford Edge. The contact stated that while the vehicle was parked, the rearview camera became inoperable. The contact stated that the rearview camera image was frozen, and the screen was blank. The dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 106,717.
Rear camera works intermittently and is often blurry/glitches. Rear powered hatch often only closes partway then reopens
New brake booster, new brakes put on 6 months ago, ABS now has problems. Car starts to skid when braking, only 1 brake works, car only has about 140,000 miles on it. When on the freeway at about 60-65 mph, car will start to lose power and shake until you hit the brakes really hard 2 or 3 times, no accident yet but if not fixed, it will happen. Brake pedal goes down to the floor will sitting at a red light or at a stop light.
The contact owns a 2014 Ford Edge. The contact stated that while reversing, the rearview camera image failed to display. A message advising that the rearview camera was inoperable and to contact the dealer was displayed. The contact stated the failure occurred intermittently while reversing. The dealer and the manufacturer were not notified of the failure. The vehicle was not diagnosed or repaired. The failure mileage was approximately 133,400.
The contact owns a 2014 Ford Edge. The contact stated that while attempting to reverse, the rearview camera display screen went blank, and the contact was unable to view an image behind the vehicle. The vehicle was driven to an independent mechanic to be diagnosed. The contact was informed that the communication module needed to be replaced. The vehicle was not repaired. The manufacturer was not informed of the failure. The failure mileage was 141,000.
Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers.
Categories with enough reports to have a page of their own
Data on this page last refreshed .