2013 Hyundai Genesis

2013 Hyundai Genesis sedan (BH) is experiencing the intermittent soft brake pedal and reduced braking pressure that matches the TSB 22-BR-001H for the HECU on 2009-2012 Genesis sedans. I took it to the local dealership but their mechanic said they could not recreate the condition. The ABS and ESC lights have both come on at times but I was told there are no stored codes. The tech noted that the rear driver brake pads appeared to have some additional wear indicating additional ABS activity or sticking brake pads. I paid to have a brake service performed and the brake fluid flush/replacement performed to eliminate the concern of any air entrapment or sticking brake pads. However, this work did not resolve the problem. The shop said there are no open recalls nor brake related TSBs for the 2013. They have not fully tested the master cylinder, booster, nor the HECU. With no support for the model year, despite the MANY issues reported for this problem on the 2013 and Hyundai's knowledge of these problems form 2009-2020 model years, this TSB should be expanded for additional model years and likely should be considered as a recall repair due to the safety risk of brake pressure loss.

NHTSA ID

11705152

Incident

Dec 4, 2025

Driving the vehicle between 35 and 40 mph, the vehicle completely shut off without warning. No check engine light prior to the vehicle shutting down. It was taking to the dealership for a scheduled oil change and the issue with was mention to the dealership. They told me that they hadn't heard of that issue at the time.

NHTSA ID

11589161

Incident

Jun 2, 2022

Brake pedal has to be pushed harder than normal to get brakes to engage. Dealer has diagnosed problem as faulty ABS module which is not considered as part of recall for CCU unit on other hyundai models

NHTSA ID

11580778

Incident

Jan 1, 2024

SOFT BRAKE PEDAL ON APPLICATION...AND CONTINUES TO FLOOR BEFORE ANY ACTIVE BRAKING. NO WARNING OR LIGHTS ACTIVE ON DASH. THIS RESULTS IN EXTENDED BRAKING DISTANCE AND POSSIBLE COLLISION WITH VEHICLES AHEAD. ISSUE IS KNOWN TO MANUFACTURER AND DEALERS. DEALERS DELAY AVOID REPAIRS STATING NO PARTS (58920-3M3A6) AVAILABLE. HYUNDAI TSB 21-BR-001H-1 ISSUED FOR HYUNDAI GENESIS 2009THRU 2012 MANUFACTURE DATE, HOWEVER BRAKING FAILURES CONTINUE FOR LATER MODEL YEARS DUE SAME PART #. DEALER DIAGNOSED ISSUE.

NHTSA ID

11577690

Incident

Feb 16, 2024

The rear passenger window will no longer rise. This leaves my car an easy target for theft and water damage.

NHTSA ID

11575918

Incident

Aug 8, 2023

SUNROOF GLASS SHATTERED WHILE DRIVING ON INTERSTATE 295 JACKSONVILLE,FL FOR REASONS UNKNOWN. Luckily interior sunroof shade was pulled close or the shattered glass fragments would have fallen on passengers heads, The sunroof OEM is a powered sunroof that was in closed position and is not used or opened often. Outside weather at time was DAY LIGHT about 4:45pm no rain temp about 55 degrees. Called local Hyundai dealer to see if there were any open recalls & TSB's related to the sunroof shattering. They said none. I have pictures if needed. I tried to upload them but your website kicked me out when I hit the upload link below.

NHTSA ID

11563387

Incident

Jan 2, 2024

On multiple occasions, occurring more and more frequently, my 2013 Genesis R-Spec sedan has experienced brake pedal fade issues. The brakes work fine one minute and the next the pedal will go almost to the floor before slowing the vehicle down. The car has approximately 150K miles and is still in great shape. Brakes have been serviced, checked, and inspected by a reputable mechanic. No leaks or other issues noted. I did find a TSB related to this, Hyundai TSB [XXX], also it looks like there is a recall on earlier models, recall number13V-489 / 114, built on or before March of 2012. My car was built Oct 2012, but i believe it is affected. I contacted my local dealer to check to see if the TSB had been expanded or if there were any other issues and no deal. The person on the phone did tell me my car was not covered under the two issues above. I have since made an appointment to have the computer scanned to gather additional data. Please advise. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6) The contact stated he provided the an incorrect TSB number and would like to provide the correct number.

NHTSA ID

11559647

Incident

Dec 5, 2023

The dashboard near front passenger side airbag is cracked and Hyundai wouldn’t tell me if it affects airbag deployment or safety.

NHTSA ID

11526112

Incident

Oct 31, 2022

The National Highway Traffic Safety Administration (NHTSA) has issued an urgent safety advisory regarding dangerous, counterfeit driver‑side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN), that have been identified in U.S. vehicles following prior crashes, theft, or non‑certified airbag replacements. These inflators are not approved for use, may rupture during deployment, and have caused serious injuries and fatalities. Please see attached announcement, provided by NHTSA, for more details.

The National Highway Traffic Safety Administration (NHTSA) has identified the presence of substandard and dangerous driver’s-side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN). These inflators were not supplied, approved, or authorized by the vehicle manufacturers and have primarily been found in vehicles that previously experienced a crash and underwent airbag replacement using non-genuine parts. These dangerous inflators have ruptured during deployment, posing a serious risk of injury or death due to metal fragments entering the vehicle cabin. To date, Hyundai is aware of three people who have died while driving a Hyundai vehicle with one of these substandard replacement airbag inflators that deployed in what likely would have been a survivable crash. NHTSA has issued a public advisory urging vehicle owners and service professionals to have vehicles inspected if there is reason to believe that a non-genuine replacement airbag may have been installed. Vehicles with salvage or rebuilt titles, prior airbag deployments, or unknown repair histories may present a higher risk. NHTSA strongly cautions against self-inspection by vehicle owners and recommends inspection by trained technicians.

This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.

This TSB provides a procedure to diagnose and replace, if necessary, an automatic transmission with Incorrect Ratio DTC (transmission clutch slip in gear above limit) listed on Page 2.

This bulletin contains information about the proper removal of the windshield wiper blade protective cover on all models. If the protective cover is not removed correctly, there is a possibility of the rubber insert and rail spring becoming partially separated on the inner side of the wiper blade, which could lead to poor wiping performance and/or possible scratching of the windshield glass. Follow the procedure in this bulletin to properly remove the windshield wiper blade protective cover on all new wiper blades.

This bulletin outlines the basic components of the BG Fuel Test Kit and the procedure to test the quality of the fuel during vehicle diagnosis. Poor fuel quality may lead to cold engine startability issues, hesitation at idle or during acceleration, and/or poor driveability. In addition, prolonged vehicle operation with poor quality fuel may result in damage to the fuel system and formation of engine deposits. The BG Fuel Test Kit can be used to determine the following aspects of the fuel: • Sediment / Water Contamination Inspection • Specific Gravity • Alcohol Content