2014 Hyundai Azera

The Office of Defects Investigation (ODI) has received eight Hyundai Motor America (Hyundai) and eight Kia America, Inc. (Kia) Part 573 Recall Reports between 2016 and 2023. The combined 16 safety recalls all involve the antilock braking system (ABS) modules or Hydraulic Electronic Control Units (HECU) manufactured by the equipment supplier Mando. The Part 573 Recall Reports contain varying defect descriptions and differing remedy descriptions for the same or similar equipment supplied by Mando. Safety recalls included in this Audit Query (AQ) review include: Hyundai recalls 20V-520, 20V-543, 21V-161, 21V-160, 21V-303, 22V-056, 22V-810, and 23V-651. Kia recalls 16V-815, 20V-518, 20V-519, 21V-137, 21V-331, 22V-051, 22V-800, and 23V-652 The purpose of this AQ is to evaluate the timeliness and scoping of Hyundai and Kia’s defect decision making and adherence with reporting requirements; and understand the varying defect descriptions and remedies between these recalls.

The ABS control module needs replacing. The day it started with issues, my abs light as well as esc light, at first. Later all dash lights came on, loud beeping and eventually lost all power while driving. I understand the "fuse" was replaced during recall, but if the damage was already in the making, why should consumer have to pay? I have had it to two different mechanics, first was hyundai dealer, both diagnostic ran, both same problem. Abs control module going out, interior failure!! My car only has 80,000!! Yes, it 12 year old vehicle, has had routine maintenance and garage kept. This is a safety issue and should be taken care of by dealer.

NHTSA ID

11724814

Incident

Feb 26, 2026

The contact owns a 2014 Hyundai Azera. The contact received notification of NHTSA Campaign Number: 23V651000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.

NHTSA ID

11626457

Incident

Nov 20, 2024

The contact owns a 2014 Hyundai Azera. The contact received notification of NHTSA Campaign Number: 23V651000 (Service Brakes, Hydraulic) however, the part to do the repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

NHTSA ID

11620363

Incident

Oct 7, 2024

The contact called on behalf of his wife who owns a 2014 Hyundai Azera. The contact's wife stated that while driving home at approximately 55 MPH, the brake pedal was depressed and felt abnormally soft. The failure progressed and the brake pedal was being depressed but the brakes hesitated to engage. The contact inspected the vehicle and discovered that underneath the center of the vehicle brake fluid was dripping, and the brake fluid reservoir was completely drained. The vehicle was not towed or taken to a dealer. The vehicle was not repaired. The manufacturer was not notified of the failure. The contact referenced NHTSA campaign number 23V651000 (SERVICE BRAKES, HYDRAULIC) as a probable cause for the failure. The approximate failure mileage was 85,000.

NHTSA ID

11619963

Incident

Oct 15, 2024

Mileage

85,000 mi

I received a letter from you regarding “Recall on the Anti-Lock Brake System” letter states:: Our records indicate that your vehicle is affected by this recall. So I contacted the Hyundai dealer here in El Paso, made an appointment, (which took 2wks) went to the appointment showed them the letter & was told they would call me. I never heard back from them, I called again & informed them I was calling about the ABS recall, I was told they had to order the part & would give me a call back, again never heard back from them. Sad to say they are the only Hyundai dealer here & they have refused to service my car. I have not made any more attempts to get the ABS fuse replaced due to the unsatisfactory customer service received from them “they just didn't care” My ? Is, how can you help me get this issue resolved. Thank you for hearing my complaint

NHTSA ID

11618161

Incident

Jun 14, 2024

The contact owns a 2014 Hyundai Azera. The contact received notification of NHTSA Campaign Number: 23V651000 (Service Brakes, Hydraulics) however, the part to do the recall repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The contact stated that the Air Bag warning light had been illuminated. The dealer was contacted. The manufacturer was not made aware of the issue. The failure mileage was 78,000. VIN tool confirms parts not available.

NHTSA ID

11610061

Incident

Sep 22, 2023

Mileage

78,000 mi

The contact owns a 2014 Hyundai Azera. The contact received notification of NHTSA Campaign Number: 23V651000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact attempted to make the dealer aware of the issue, however; was unable to contact the dealer. The manufacturer was not made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.

NHTSA ID

11600157

Incident

Mar 30, 2024

The contact owns a 2014 Hyundai Azera. The contact received notification of NHTSA Campaign Number: 23V651000 (Service Brakes, Hydraulic) however, the part to do the recall repair was not yet available. The local dealer was not contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.

NHTSA ID

11592388

Incident

Jun 4, 2024

Certain 2012 – 2017 model year Accent, 2012 – 2017 model year Azera, 2013 – 2018 model year Santa Fe Sport, 2013 – 2019 model year Santa Fe, and 2012 – 2017 model year Veloster vehicles may exhibit an intermittent airbag warning light and diagnostic trouble codes (DTCs) may be set. At Hyundai, we are committed to providing vehicles of outstanding quality and value. In an effort to meet this commitment, the warranty coverage for the Occupant Classification System (OCS)/Occupant Detection System (ODS) under these conditions has been extended to 18 years/unlimited mileage from the date of original retail delivery or date of first use (whichever occurs first) and is valid for original and subsequent owners.

Some vehicles listed below may exhibit an intermittent airbag warning light and DTC(s) B1763 (OCS ECU Defect), and/or B1764 (OCS Mat Defect) may be stored. Hyundai is extending the warranty coverage of the sensor for the Occupant Classification System (OCS) / Occupant Detection System (ODS) to 18 years/unlimited mileage from the date of original retail delivery or date of first use (whichever occurs first) and is valid for original and subsequent owners. Refer to the warranty and parts information outlilned in this bulletin. This bulletin contains the procedure to inspect for the airbag warning light and DTC(s), replace the OCS (ODS) unit or wire harness, reset the OCS (ODS), and initialize the power seat module (if applicable). This TSB also contains the procedure to replace the OCS (ODS) mat if DTCs exist after replacement of the OCS (ODS) wire harness.

Some vehicles listed below may exhibit an intermittent airbag warning light and DTC(s) B1763 (OCS ECU Defect), and/or B1764 (OCS Mat Defect) may be stored. Hyundai is extending the warranty coverage of the sensor for the Occupant Classification System (OCS) / Occupant Detection System (ODS) to 18 years/unlimited mileage from the date of original retail delivery or date of first use (whichever occurs first) and is valid for original and subsequent owners. Refer to the warranty and parts information outlined in this bulletin.

The National Highway Traffic Safety Administration (NHTSA) has identified the presence of substandard and dangerous driver’s-side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN). These inflators were not supplied, approved, or authorized by the vehicle manufacturers and have primarily been found in vehicles that previously experienced a crash and underwent airbag replacement using non-genuine parts. These dangerous inflators have ruptured during deployment, posing a serious risk of injury or death due to metal fragments entering the vehicle cabin. To date, Hyundai is aware of three people who have died while driving a Hyundai vehicle with one of these substandard replacement airbag inflators that deployed in what likely would have been a survivable crash. NHTSA has issued a public advisory urging vehicle owners and service professionals to have vehicles inspected if there is reason to believe that a non-genuine replacement airbag may have been installed. Vehicles with salvage or rebuilt titles, prior airbag deployments, or unknown repair histories may present a higher risk. NHTSA strongly cautions against self-inspection by vehicle owners and recommends inspection by trained technicians.

The National Highway Traffic Safety Administration (NHTSA) has issued an urgent safety advisory regarding dangerous, counterfeit driver‑side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN), that have been identified in U.S. vehicles following prior crashes, theft, or non‑certified airbag replacements. These inflators are not approved for use, may rupture during deployment, and have caused serious injuries and fatalities. Please see attached announcement, provided by NHTSA, for more details.

This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.