2008 Toyota Sequoia

While accelerating to pass a vehicle that was signaling and operating well below the speed limit, my vehicle experienced sudden and continued unintended acceleration. I was able to bring the vehicle to a stop while fighting against the engine within an intersection but the engine continued building revs, bouncing off the limiter while my foot was entirely removed from the accelerator pedal and fully applied to the brake. During this time I had moved the gear selector to neutral, only furthering the engine's revs, and attempted to place the vehicle into park without success, before having to reach beneath my dashboard, foot still on the brake, to pull the accelerator pedal up. I verified both visually and by feel that the pedal was stuck in it's position entirely on it's own, there was no outside object or floormat inhibiting it's ability to return.

NHTSA ID

11751908

Incident

Jul 12, 2026

Odometer Fraud. The contact purchased a 2008 Toyota Sequoia. The contact discovered a mileage discrepancy after the purchase. The vehicle was a dealer sale. At the time of purchase, the vehicle mileage was 143,000. It was later discovered, when the contact received the Title, the mileage was 248,000.

NHTSA ID

11717336

Incident

Feb 9, 2026

Mileage

248,000 mi

The drivers seat belt sometime does not retract. One of the seat belts in the middle row retracts slowly or sometimes does not retract. Another seatbelt is very tough to pull out to buckle. I just purchased this vehicle so I’m not sure how long the seatbelts have been an issue.

NHTSA ID

11576476

Incident

Mar 8, 2024

My wife pulled out of a parking lot and there was a loud noise and the vehicle began to shudder violently. Approximate speed was 10 mikes an hour and she was able to stop. The drivers side rear suspension airbag had broken through the lower control arm, and was under the rear driver side tire. It appears some frame members are cracked as well. Had this happened at highway speeds, it may have resulted in a catastrophic accident. Writer contacted Toyota, as I do not recall being notified of their ZH9 frame replacement program that resulted from a class action settlement, and the rear of the frame is horribly rusted. Vehicle probably would have qualified at that time to be fixed, but am now out of the window. Manufacturers should be made to notify via certified mail, so they know their customers received notifications like this.

NHTSA ID

11569276

Incident

Jan 31, 2024

The contact owns a 2008 Toyota Sequoia. The contact stated that while the vehicle was at the independent mechanic for an oil change, the mechanic informed her husband that the chassis was severely rusted. The dealer and other unknown dealers were notified of the failure and informed the contact that they could not repair the vehicle under Toyota Campaign Number: ZH7 because the campaign had expired. The manufacturer was notified of the failure and confirmed the assessment from the dealers. The vehicle was not repaired. The failure mileage was approximately 30,000. The VIN was unavailable.

NHTSA ID

11530450

Incident

Jun 5, 2023

Mileage

30,000 mi

The contact owns a 2008 Toyota Sequoia. The contact stated that while the vehicle was in for routine service, the independent mechanic discovered that the rear subframe was severely damaged due to rust and corrosion. The contact was advised that holes were present in the subframe, and the vehicle was unsafe to drive. The vehicle was not repaired. The local dealer and manufacturer were notified of the failure and informed that the vehicle was no longer qualified under the Extended Warranty Coverage for the failure. The failure mileage was 168,000. The VIN was not available.

NHTSA ID

11517022

Incident

Apr 13, 2023

Mileage

168,000 mi

A valve spring in the engine failed causing one cylinder to fail as well. The failure fortunately happened at low speed and the engine didn't seize. This a known problem with Toyota V8s of this model year and was the reason for a recall of Lexus vehicles with the same engine. Had this happened at highway speed, the engine, we were told, could have experienced a total failure causing the engine to seize likely leading to a serious accident. The car is available for inspection at the moment, but this failure requires a total engine rebuild or an engine replacement which are both very costly and we may have to purchase a new car. The car has not been inspected by Toyota, police, insurance or anyone other than a car service center. There were no warning lights, messages or any symptoms prior to the failure. It was sudden with no warning at all. The car has been very well maintained over the years with regular maintenance done on a consistent schedule.

NHTSA ID

11494722

Incident

Nov 18, 2022

Activation of VSC off and slip indicator flashing.

NHTSA ID

11470585

Incident

Jun 22, 2022

Some 2005 – 2026 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.

Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.

The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.

To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.

Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to remove the RapgardTM protective film within 90 days from initial application.

Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid. Follow the Repair Procedure in this bulletin to clean vehicles that may have been subjected to contamination by airborne iron particles such as rail dust during rail transportation or extended storage near industrial areas.