2018 Toyota Sequoia

I own a 2018 Toyota Sequoia experiencing fuel pump failure symptoms including extended crank and loss of power. This issue matches NHTSA Recall 20V012000, which affects similar vehicles with the same fuel pump defect. However, my VIN is not included in the recall despite identical symptoms and safety risk. I am requesting investigation into whether additional VINs, including mine, should be included in this recall due to ongoing failures.

NHTSA ID

11729875

Incident

Feb 14, 2026

The contact owns a 2018 Toyota Sequoia. The contact stated that while attempting to start the vehicle, the vehicle failed to start. The contact stated that after several attempts, the vehicle started. While driving at an undisclosed speed, the vehicle drove abnormally rough. No warning lights were illuminated. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The contact referenced NHTSA Campaign Number: 20V012000 (Fuel System, Gasoline); however, the VIN was not associated with the recall. The manufacturer was made aware of the failure. The contact was advised to contact the NHTSA Hotline to report the failure. The failure mileage was approximately 154,000.

NHTSA ID

11720414

Incident

Jan 14, 2026

Mileage

154,000 mi

The contact owns a 2018 Toyota Sequoia. The contact stated that while having routine maintenance at the local dealer, he was informed that the outer seals were leaking and full of fluid. The vehicle was diagnosed, and it was determined that the rack and pinion seals had failed. The outer seals were leaking and full of fluid. The vehicle was repaired. The contact stated that the failure was related to NHTSA Campaign Number: 21E103000 (Steering). The manufacturer was contacted, but no assistance was provided. The failure mileage was approximately 100,000.

NHTSA ID

11592886

Incident

Jun 4, 2024

Mileage

100,000 mi

The sunroof exploded from the inside while driving at highway speeds

NHTSA ID

11527343

Incident

Jun 15, 2023

In the past few months the automatic braking feature was activated without any reason. No obstruction in front, no unusual weather or driving conditions. Fortunately nobody was close behind and no accident occurred. Today the blind spot and cross traffic indicators stopped working. I have not taken it into the dealer yet. I will do so soon.

NHTSA ID

11424520

Incident

Jul 12, 2021

The contact owns a 2018 Toyota Sequoia. The contact stated while driving at 55 mph, the lane departure and rear cross passing warning light illuminated and the vehicle failed to turn off. The contact took the vehicle to the local dealer to inspect the vehicle however, the mechanic was unable to duplicate the failure. Several months later, the failure recurred. The contact took the vehicle back to the same local dealer to be inspected. The contact was informed that the rear bumper sensor was not properly aligned to the brackets on the bumper, causing the failure. The vehicle was repaired however, the contact was concerned that at some point the failure might recur. The manufacturer was made aware of the failure. The failure mileage was 45,000.

NHTSA ID

11420278

Incident

May 25, 2021

Mileage

45,000 mi

I TOOK MY 2018 TOYOTA SEQUOIA (VIN: [XXX]) ON SEPTEMBER 23, 2020 FOR THE SIX-MONTH TOYOTACARE SERVICE TO AMERICAN TOYOTA LOCATED AT 5995 ALAMEDA BLVD NE, ALBUQUERQUE, NM 87113 WITH THE ASSUMPTION THAT THE SIX-MONTH TOYOTACARE SERVICE WILL INCLUDE FIXING ANY PENDING SAFETY RECALL. HOWEVER, AFTER THE SERVICE, WHEN I CHECKED THE PAPERWORK, I FOUND OUT THAT THE PENDING SAFETY RECALL (MANUFACTURER RECALL: 20TA02, NHTSA RECALL: 20V012) WAS NOT FIXED AND IT WAS CLAIMED THAT THERE WERE NO SAFETY RECALLS ASSOCIATED WITH THE VEHICLE (SEE THE ATTACHED PAPERWORK). I CALLED THE SERVICE DEPARTMENT AT THE AMERICAN TOYOTA AND THE SERVICE REPRESENTATIVE DIDN'T GIVE ME A REASONABLE REASON SO I DEMANDED TO TALK A MANAGER. THE MANAGER DIDN'T KNOW WHY THE SAFETY RECALL WAS NOT FIXED SO HE PROMISED TO DO SOME INVESTIGATIONS AND GET BACK TO ME. LATER, A SENIOR MANAGER FROM THE AMERICAN TOYOTA CALLED ME AND GAVE ME THE FOLLOWING REASONS FOR NOT FIXING THE SAFETY RECALL: - I SPECIFICALLY DIDN'T ASK FOR SAFETY RECALL TO BE FIXED - AMERICAN TOYOTA DIDN'T HAVE A CERTIFIED TECHNICIAN AVAILABLE AT THAT TIME TO FIX THE SAFETY RECALL - AMERICAN TOYOTA MADE FALSE STATEMENT ON THE SERVICE PAPERWORK THAT THERE WAS NO SAFETY RECALL ASSOCIATED WITH THE VEHICLE WHEN I TALKED TO THE SENIOR SERVICE MANAGER AT AMERICAN TOYOTA, HE PROMISED TO GET THE DATABASE AND PAPERWORK UPDATED SOON BUT AS OF TODAY (THREE WEEKS LATER) I HAVE NOT RECEIVED A CORRECTED PAPERWORK FROM THE AMERICAN TOYOTA. I SEE THIS A SYSTEMATIC ISSUE AT AMERICAN TOYOTA TO FALSELY MARK THE SERVICE PAPERWORK AS NO PENDING SAFETY ISSUE IF THE CUSTOMER DIDN'T ASK FOR FIXING A SAFETY ISSUE AND/OR IF A CERTIFIED TECHNICIAN IS NOT AVAILABLE. [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6). *TR

NHTSA ID

11364675

Incident

Sep 23, 2020

Mileage

18,000 mi

AUDIO MULTIMEDIA (INCLUDING HANDSFREE DRIVING DEVISE AND GPS) WITHOUT ANY REASON AND WHILE THEY ARE IN USE REBOOTING AND REBOOTING, AND CAN CAUSE DISTRACT THE DRIVER

NHTSA ID

11290166

Incident

Dec 19, 2019

Mileage

65 mi

Some 2005 – 2026 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.

Some customers may experience echoing on the line calling the vehicle when using Bluetooth Hands Free. This is caused by the phone Hands Free volume being too low.

The air conditioning dye injection tool kit has been developed to aid in identifying the location of air conditioning refrigerant leaks. The procedures outlined in this Service Bulletin aid in locating, inspecting, and repairing refrigerant leaks.

Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.

To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.

The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.