RoadVitals

2009 Ford E-250

Recalls, owner-reported complaints, investigations and safety data

Data refreshed

Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
2
Latest Mar 23, 2023
Safety recallsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
19
Latest May 24, 2016
InvestigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
1

Overview

Our database contains 2 NHTSA owner-reported complaints for the 2009 Ford E-250, most frequently naming the driver assistance and engine categories. 19 safety recalls have been issued covering this model year; and 24 manufacturer communications are on file.

Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.

What owners report

Complaints grouped by the component NHTSA recorded

  • Driver assistance150.0%
  • Engine150.0%

Percentages are of component mentions. A single complaint can name more than one component, so these do not sum to the total complaint count.

Safety recalls

19 campaigns cover this model year

View all 19

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
16V350000

EQUIPMENT ADAPTIVE/MOBILITY

May 24, 2016
2 units potentially affected
The defect: New England Wheels (New England) is recalling certain model year 2006-2014 Ford E-250, E-350, and 2015 Ford Transit vans equipped with certain model S2005, S2010, S5005, S5010, S5505, and S5510 wheelchair lifts by Ricon. The platform side plate of the affected wheelchair lifts may crack. Additionally, the lifts are equipped with folding link arms that may have pivot holes that are too big, allowing the bearings to move out of position.
The risk: If the platform side plates crack or the platform mounting fails from out-of-position bearings, the lift platform can separate from the lift and come to rest against the vehicle's lift door. When the vehicle's doors are opened, the platform may fall onto the lift operator, increasing their risk of injury.
The remedy: New England will notify owners, and Ricon dealers will inspect the link arms for damage or for displaced bearings. The platform will be inspected for cracks. Any damaged parts will be replaced, free of charge. The recall began on June 29, 2016. Owners may contact New England customer service at 1-800-886-9247. New England's number for this recall is 16E-020.
New England WheelsManufacturer number 16E-020View on NHTSA.gov
15V779000

EQUIPMENT ADAPTIVE/MOBILITY

Nov 20, 2015
278 units potentially affected
The defect: New England Wheels is recalling certain model year 2006-2014 Ford E-250, and E-350 cargo vans modified to be equipped with certain model S2005, S2010, S5005, S5010, S5505, and S5510 wheelchair lifts built by the Ricon Corporation. The affected lifts are equipped with folding link arms that may have pivot holes that are too big, allowing the bearings to move out of position.
The risk: If the bearings move out of position, the stowed platform may have excessive movement resulting in failure of the platform mounting. This failure could cause the wheel chair lift platform to fall out of the vehicle when the doors are opened, increasing the risk of injury for the lift operator.
The remedy: New England Wheels will notify owners, and Ricon dealers will inspect the link arms for damage or for displaced bearings. The platform will be inspected for cracks. Any damaged parts will be replaced, free of charge. The recall began on January 5, 2016. Owners may contact New England Wheels customer service at 1-800-866-9247, or Ricon Customer Service at 1-800-322-2884. New England Wheels' number for this recall is 15E-068. Note: These vans and wheelchair lifts were subject to a similar recall in 2014. All vehicles that received that recall remedy are still affected by this recall as well.
New England WheelsManufacturer number 15E-068View on NHTSA.gov
15V763000

EQUIPMENT ADAPTIVE/MOBILITY

Nov 17, 2015
285 units potentially affected
The defect: Mobility Specialists, Inc. (Mobility Specialists) is recalling certain model year 2006-2014 Ford E-250, and E-350 vehicles modified to be equipped with certain model S2005, S2010, S5005, S5010, S5505, and S5510 wheelchair lifts manufactured by Ricon Corporation. The platform side plate of the affected wheelchair lifts may crack. Additionally, the affected lifts are equipped with folding link arms that may have pivot holes that are too big, allowing the bearings to move out of position.
The risk: If the platform side plates crack, the lift platform can separate from the lift and come to rest against the vehicle's lift door. When the doors are opened, the platform may fall out, increasing the risk of injury to the lift operator. Additionally, if the bearings move out of position, the stowed platform may have excessive movement resulting in failure of the platform mounting. This failure could cause the wheel chair lift platform to fall out of the vehicle when the doors are opened, increasing the risk of injury for the lift operator.
The remedy: Mobility Specialists will notify owners to take their vehicles to a Ricon dealer or service center who will install supplemental platform support bumpers. Any platform that has already started cracking will be replaced, free of charge. The recall began on November 13, 2015. Owners may contact Mobility Specialists customer service at 1-877-777-5438, or Ricon customer service at 1-800-322-2884.
Mobility Specialists, Inc.View on NHTSA.gov

Recent owner complaints

Reports submitted to NHTSA, shown in the owner's own words

Engine
Filed Mar 23, 2023

The contact owns a 2009 Ford E-250. The contact stated that the vehicle was taken to an independent mechanic to be serviced and was informed that the catalytic converters and an unknown sensor needed to be replaced. The vehicle was not repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 95,484.

NHTSA ID
11513410
Incident
Mar 3, 2023
Mileage
95,484 mi
Driver assistance
Filed Feb 18, 2010
Crash reported

TL* THE CONTACT OWNS A 2009 FORD E-250. THE CONTACT PURCHASED THE VEHICLE IN MAY AND IT IS USED OCCASIONALLY. ON JANUARY 29TH THE CONTACT DROVE THE VEHICLE. SHE STATES AFTER THE DRIVING THE VEHICLE, THE MOTOR WAS LEFT RUNNING. THE VEHICLE BEGAN TO TAKE OFF ON ITS OWN. THE CONTACT STATES THE GENTLEMEN IN THE VEHICLE TRIED TO STOP THE VEHICLE BUT IT BEGAN TO PICK UP SPEED. SHE STATED THAT WHILE THE VEHICLE WAS BACKING UP THERE WERE NO LIGHTS INDICATING THE VEHICLE WAS BACKING UP. SHE STATED THAT THE VEHICLE SHOT FORWARD AND THE REVERSE LIGHTS CAME ON. THE CONTACT STATED THE GENTLEMEN IN THE VEHICLE HAD TO TURN THE KEY IN ORDER FOR THE VEHICLE TO STOP. SHE STATED THAT THE VAN CRASHED INTO THE LOADING DOCK. THERE WAS $3,000 IN DAMAGES, THERE WERE NO INJURIES. THE CONTACT STATED SHE CONTACTED THE MANUFACTURER AND THE REPRESENTATIVES WERE VERY RUDE TO HER AND DID NOT BELIEVE HER STORY. THE CURRENT AND FAILURE MILES WERE 287.

NHTSA ID
10311835
Incident
Jan 29, 2010
Mileage
287 mi

Manufacturer communications

A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.

SSM 54601

ELECTRICAL SYSTEM; STRUCTURE:BODY

Ford and Lincoln vehicles equipped with wired keyless entry keypad systems and accessory wireless keyless entry keypad systems may or may not come with a wallet card containing the master code. Unlike the integrated wired keypad, the accessory wireless keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool or from the label printed on the body control module (BCM). The Factory Keyless Entry Code application within the diagnostic scan tool will not provide an applicable master code for the accessory wireless keypad. If the wallet card for an accessory keypad is not available, the "Wireless RF Keypad Diagnosis Guide" can be referenced and provides direction on how to retrieve the master code. This guide is located under the Workshop Manual tab > Accessories > Installation > Wireless RF Keypad Diagnosis Guide > PPT C > Step C2.<br /><br /> Note: The only available keypad for some vehicles from the assembly plant is the accessory wireless keyless entry keypad. The integrated wired keypad cannot be installed on vehicles not equipped from the factory with a wired keyless entry k

SSM 52476

EQUIPMENT

All accessory stick-on keyless entry keypads come with a wallet card containing the master code. If the accessory keypad was factory installed, this card will be placed in the glove box and should be handed to the vehicles owner during initial delivery. Unlike the integrated (wired) factory keypad, the accessory keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool. If the wallet card for an accessory keypad is lost, follow these steps to recover the code. Dealer Key Code access is granted through the Dealer Program Enrollment System (DPES); dealership management can authorize users. The authorized user must go to FMCDealer.com > Parts and Service > Parts Product Line Information > Keys/Entry Devices > Aftermarket Keyless Entry Keypad Code Access. Follow the instructions on the screen to obtain the master code for the accessory keypad.

DOR-B8H4Z-11

STEERING

This SKU is a front upper ball joint. The Customer communication requested return of unsold inventory to inspect for ball studs with excessive rotational friction in the ball joint assembly. Excessive friction in the ball joint assembly may cause a perceptible increase in steering effort.

SSM 47201

EQUIPMENT

Replacing the original equipment SYNC/Navigation system with either an aftermarket SYNC/Navigation kit or modifying original SYNC/Navigation parts to provide additional features is not recommended nor supported on any Ford, Mercury or Lincoln vehicle. Only approved Genuine Ford accessories or originally installed systems are supported and certified to function correctly with other vehicle systems. If you suspect a system has been modified, the following resources can be used to verify original equipment: Monroney Label (Window Sticker), Professional Technician Society (PTS) OASIS tab  select SYNC or HVBOM. For Genuine Ford accessories use: PTS Workshop Tab  select Dealer Installed Accessory or Accessory Installation.

SSM 47009

EQUIPMENT:ELECTRICAL

The Accessory (Wireless) Keyless Entry Keypad can only be used with vehicles that are factory built with Remote Keyless Entry (RKE). The master code for the Accessory (Wireless) Keyless Entry Keypad can be retrieved from FMCDealer - Parts and Service - Parts Product Line Information - Keys/Entry Devices - Aftermarket Keyless Entry Keypad Code Access. Access to this site is granted through Dealer Program Enrollment System (DPES) and Dealer Principal, General Manager or Parts and Service Director can authorize users. Once authorized the retrieval process for master code can be obtained. The master code for the Accessory Keyless Entry Keypad cannot be retrieved from the body control module(BCM) with a diagnostic tool.

SSM 46900

ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)

Some vehicles may exhibit a no start condition with an illuminated malfunction indicator lamp (MIL) and a DTC P161A after PCM replacement. This may be due to the parameter reset procedure not being properly completed. To clear this DTC, use the Ford Integrated Diagnostic System (IDS) service tool or Ford J2534 Diagnostic Software, select - Toolbox - Body - Security - PATS Functions - Parameter Reset. Follow the on-screen instructions to complete the procedure. This procedure will transfer the existing Key ID information between the modules without the need of having 2 programmed PATS keys present. There is no need to program keys when the PCM is going to be replaced. Additional information can be found in the Workshop Manual (WSM), Section 419-01. Missing or lost keys are not warrantable.

Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Compare model years

Complaint and recall counts across every year of this model

Ford E-250 by model year
YearComplaintsRecallsInvestigationsIssue Index
2023010—
2022100—
2021000—
2020000—
2019000—
2018000—
2017200—
2016100—
20147110—
20131111049.1
20128120—
20116180—
20109130—
2009Viewing2190—
20086221—
20076271—
20061231160.4
20051111161.1
20048182—
2003178265.8
2002175261.4
2001183262.3
2000185263.2
1999316258.8
1998165253.0
1997244362.4
1996203048.6
1995153055.1
1994113151.4
1993731—
1992143361.2
1991815—
1990426—
1989725—
1988204—
1987023—
1986034—
1985254—
1984263—
1983061—
1982031—
1981011—
1980121—
1979141—
1978161—
1977020—
1976020—
1975050—

Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.