SEATS
1990 GMC Suburban
Recalls, owner-reported complaints, investigations and safety data
Data refreshed
Overview
Our database contains 22 NHTSA owner-reported complaints for the 1990 GMC Suburban, most frequently naming the brakes, interior & seats and suspension categories. 2 safety recalls have been issued covering this model year; 4 NHTSA investigations name it; and 4 manufacturer communications are on file.
Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.
Complaint activity over time
When owners filed reports about this model year
View as table
| Month | Complaints filed | Cumulative |
|---|---|---|
| Jul 1995 | 1 | 1 |
| Oct 1995 | 1 | 2 |
| Nov 1995 | 1 | 3 |
| Aug 1996 | 1 | 4 |
| Jan 1997 | 1 | 5 |
| May 1997 | 1 | 6 |
| Oct 1997 | 2 | 8 |
| Jun 1998 | 1 | 9 |
| Aug 1998 | 1 | 10 |
| Aug 1999 | 1 | 11 |
| Sep 1999 | 2 | 13 |
| Sep 2000 | 1 | 14 |
| Feb 2001 | 2 | 16 |
| Apr 2001 | 1 | 17 |
| May 2001 | 2 | 19 |
| Mar 2002 | 3 | 22 |
What owners report
Complaints grouped by the component NHTSA recorded
- Brakes936.0%
- Interior & seats728.0%
- Suspension28.0%
- Driver assistance28.0%
- Tires & wheels14.0%
- Transmission14.0%
- Electrical14.0%
- Other / unspecified14.0%
Percentages are of component mentions. A single complaint can name more than one component, so these do not sum to the total complaint count.
Safety recalls
2 campaigns cover this model year
Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.
Check a VIN on NHTSA.govPOWER TRAIN:AUTOMATIC TRANSMISSION
Safety investigations
NHTSA inquiries naming this vehicle. An investigation is not a finding of a defect.
ENGINE COMPARTMENT FIRES
AN ALLEGED MALFUNCTION IN THE ATLERNATOR RESULTING IN ENGINE COMPARTMET FIRES.
SEAT BACK BOLT BREAKAGE
There is no summary currently available
SEAT BACK FAILURES
There is no summary currently available
TRAILER HITCH SEPERATION
There is no summary currently available
Recent owner complaints
Reports submitted to NHTSA, shown in the owner's own words
CONSUMER RAISED HOOD; ATTEMPTED TO START VEHICLE, AFTER VEHICLE WOULD NOT START, DOUGLAS BATTERY SUDDENLY BLEW UP, CONSUMER WAS INJURED. *AK *TT
- NHTSA ID
- 8005467
- Incident
- Aug 1, 2000
CONSUMER STATES THE METAL PARKING BRAKE CABLE WEARS INTO THE RUBBER BRAKE HOSE, WHICH COULD CAUSE FAILURE OF THE BRAKE HOSE AND THE REAR BRAKES, THE RUBBER BRAKE HOSE WAS ALMOST WORN TO THE POINT OF FAILURE, THE METAL PARKING BRAKE CABLE DOES HAVE A METAL SLEEVE ON IT TO PROTECT THE RUBBER HOSE, BUT THE NATURAL POSITION OF THE HOSE AND CABLE CAUSES THE SLEEVE TO NOT LINE UP IN THE DESIRED POSITION. *TT
- NHTSA ID
- 785902
- Incident
- Mar 3, 2002
I BELIEVE THE SUBURBAN SERIES VEHICLES HAVE A DESIGN DEFECT IN THE BRAKE SYSTEM BECAUSE THE REAR BRAKE HOSE(FROM THE BODY TO A CONNECTOR ABOVE THE DIFFERENTIAL) IS USED AS A SUPPORT FOR THE PARKING BRAKE CABLE. THE STRONGER, HEAVIER PARKING BRAKE CABLE RUBS ON THE RUBBER BRAKE HOSE, CAUSING THE RUBBER HOSE TO FAIL. THE PARKING BRAKE CABLE DOES HAVE A 2INCH METAL SLEEVE OVER IT NEAR WHERE THE HOSE AND CABLE RUB. HOWEVER, THIS SLEEVE IS NOT LOCATED WHERE THE NATURAL LAY OF THE HOSE/CABLE IS. IN FACT, THE SLEEVE HAS A ROUGH EDGE ON IT, WHICH CAUSES ADDITIONAL WEAR ON THE RUBBER HOSE. THE RUBBER BRAKE HOSE IS ALSO BENT WHERE IT CONNECTS TO THE TRUCK BODY BECAUSE THE HOSE MUST SUPPORT THE WEIGHT OF THE PARKING BRAKE CABLE. THE RUBBER BRAKE HOSE ON MY SUBURBAN WAS ALMOST WORN THROUGH WHEN I NOTICED IT. I BELIEVE THE FIX COULD BE THAT THE PARKING BRAKE CABLE BE ROUTED BELOW THE RUBBER BRAKE HOSE WITH A RUBBER DOUGHNUT BETWEEN THE HOSE/CABLE.O. *AK
- NHTSA ID
- 758997
- Incident
- Mar 3, 2002
UPPER BALL JOINTS WERE REPLACED 9/25/99 BY SUSPENSION PLUS IN SAN DIEGO USING MCQUAY NORRIS PARTS.. ON OR ABOUT 11/04/2000 THE VEHICLE WAS TURNING AT LOW SPEED LEFT TURN INTO A PARKING LOT WHEN THE RIGHT FRONT WHEEL COLLAPSED UNDER THE FRONT END. SUBSEQUENT REPAIR ACTION DETERMINED THAT THE REPLACED UPPER BALL JOINT ASSEMBLY HAD FAILED BY SEPARATION OF THE BALL JOINT RETAINER ASSEMBLY FROM THE BALL JOINT. THE FAILURE OCCURRED AFTER 9,000 MILES OF OPERATION. WE HAVE THE FAILED PART.*AK
- NHTSA ID
- 745305
- Incident
- Nov 4, 2000
DRIVING ON HIGHWAY. THE VEHICLE STARTED RACING. COULD NOT STOP. PUT IN NUETRAL,ENGINE RACING. SHUT ENGINE . LATER FOUND THAT THE HOOK FROM SERVO HAD RUSTED AND BROKEN OFF AND THE BAR ATTACHED TO THE THROTTLE HAD GOTTEN STUCK IN THE THROTTLE. THIS HOOK SHOULD NOT BE OF A MATERIAL THAT CAN RUST & BREAK OFF LIKE THAT. ALSO I HAVE LOOKED INTO THE SERVICE MANUAL & THERE IS NO MENTION OF SERVICE TO THAT PART ATALL.WHY WILL THE MECHANIC EVEN LOOK AT THAT PART IF THERE IS NO MENTION FOR MAINTENANCE TO THAT PART. THAT JUST MEANS THAT GM FELT THAT THIS PART SHALL LAST TILL I CAN DRIVE THE CAR.I COULD HAVE HAD A MAJOR ACCIDENT AND I COULD STOP ONLY BECAUSE I KNEW WHAT TO DO. THE ENGINE WAS REVING LIKE CRAZY WHEN I STOPPED.*AK
- NHTSA ID
- 745247
- Incident
- Oct 8, 2000
CONSUMER WAS HEARING NOISE FROM BRAKES WHEN COMING TO A STOP, WAS INSPECTED, AND WAS ADVISED THAT FRONT BRAKES WERE NEEDED, AND REAR SHOCKS WERE LEAKING. *JB
- NHTSA ID
- 560749
- Incident
- Jan 30, 2001
FRAME OF SEAT BACK SNAPPED WHEN DRIVER ENTERED VEHICLE AND GOT INTO SEAT. *AK
- NHTSA ID
- 741357
- Incident
- Nov 15, 2000
RECALL 93V187000, WAS PERFORMED, SEAT BOLTS BROKE 2 TIMES AFTER THAT, AND 3RD TIME CONSUMER HAD TO REPLACE WHOLE SEAT FRAME. *AK
- NHTSA ID
- 879998
- Incident
- Sep 14, 1995
Manufacturer communications
A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.
POWER TRAIN:AUTOMATIC TRANSMISSION:LEVER AND LINKAGE:COLUMN SHIFT
DIAGNOSIS OF CRACKED OR BROKEN TRANSMISSION CASE. *TT 2006 AND PRIOR CARS AND LIGHT DUTY TRUCKS. *TT
POWER TRAIN
DIAGNOSTIC INFORMATION FOR INTERMITTENT TRANSMISSION DOWNSHIFT, SLIP, BUSY/CYCLING TCC OR NOISY COOLING FAN. *TT
ENGINE AND ENGINE COOLING:ENGINE:GASOLINE
COLD ENGINE KNOCK. *TW
ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE
NEW CAST IRON EXHAUST MANIFOLD AND STAINLESS STEEL GASKET TO CORRECT ENGINE NOISE CONDITION. *TW
Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.
Compare model years
Complaint and recall counts across every year of this model
| Year | Complaints | Recalls | Investigations | Issue Index |
|---|---|---|---|---|
| 2004 | 1 | 0 | 0 | — |
| 2003 | 5 | 1 | 2 | — |
| 2002 | 7 | 1 | 1 | — |
| 2001 | 5 | 2 | 2 | — |
| 2000 | 15 | 2 | 1 | 48.1 |
| 1999 | 285 | 2 | 0 | 51.8 |
| 1998 | 100 | 3 | 0 | 52.7 |
| 1997 | 200 | 3 | 5 | 59.9 |
| 1996 | 172 | 4 | 5 | 60.6 |
| 1995 | 227 | 7 | 7 | 63.8 |
| 1994 | 411 | 6 | 3 | 68.1 |
| 1993 | 212 | 2 | 3 | 65.5 |
| 1992 | 80 | 4 | 2 | 70.3 |
| 1991 | 30 | 2 | 4 | 59.6 |
| 1990Viewing | 22 | 2 | 4 | 62.6 |
| 1989 | 17 | 2 | 4 | 64.5 |
| 1988 | 8 | 2 | 5 | — |
| 1987 | 8 | 0 | 3 | — |
| 1986 | 4 | 0 | 2 | — |
| 1985 | 3 | 0 | 1 | — |
| 1984 | 5 | 0 | 1 | — |
| 1983 | 2 | 0 | 0 | — |
| 1982 | 0 | 1 | 0 | — |
| 1981 | 0 | 1 | 0 | — |
| 1974 | 1 | 0 | 0 | — |
| 1966 | 0 | 1 | 0 | — |
Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.