2022 Nissan Titan

I was driving on the interstate and there was an explosion to my sunroof.

NHTSA ID

11705767

Incident

May 22, 2025

I have noticed this problem a few times, specifically in highway traffic. When getting back up to speed, i have noticed my 2022 Nissan Titan suddenly jerk as I am accelerating back up to the posted speed limit. This has happened a few times. First time I did not pay it to much consideration, but now it's something that worries me. I have also noticed my Automatic Cruise control is having issues staying on when activated. I turn it on, but when I go to set the vehicle speed, I will sometimes get a malfunction warning. I love using the Automatic Cruise Control for its safety and to set the speed limit when I drive

NHTSA ID

11687292

Incident

Aug 4, 2025

On June 3 and June 4 when I was driving in a curve the crash warning system sensor Turn on and stop completely the truck and finally On June 07 2024 I was driving my truck and for any reasons the steering wheel got completely stuck I have to leave in the dealer because I’m not able the drive the truck That’s it was cause a factory defect The dealer take my truck 3 weeks

NHTSA ID

11607711

Incident

Aug 7, 2024

I was driving on the highway at 70 mph and for no reason the emergency brake activated and stopped the truck. I am very scared because it has happened so many times. I always drive with my child on board, I am afraid that this will end in a rollover or death. At the time of the incident the truck is already done all recalls and updates softwares

NHTSA ID

11607708

Incident

Aug 7, 2024

There was no bolt that holds the undercover after the steering system was replaced. I contacted Victoria Debnam and she told me the service would take care of it. I returned with my Titan and that took a few minutes. I went home and checked the bolt. The new bolt looked different from the OEM bolt. I contacted her and complained but she didn't respond back. Then I contacted the Nissan Affair and they told me to show up. So I showed up and went to see Robert Paolucci about the bolt issue. They put up an OEM bolt as other factory bolt. After a few days later, I went under and inspected the new bolt. The bolt is no longer tightened. I contacted Robert and Jonathan Flores via email and call but they haven't responded back. The previous bolt had already damaged the threaded hole of the frame. I did contact the Nissan Affair about the issue and they haven't responded back. Robert Paolucci texted me and selling tires and I replied back that he needed to contact me about the bolt issue. Since the non-OEM bolt damaged the hole in the frame, which can rust and corrode the frame. The frame repair could be very expensive. I don't know how they address the hole which they need to change the whole frame. The service needs to find a solution to that damage.

NHTSA ID

11602739

Incident

Jun 12, 2024

I am trying to get an appointment at the Nissan Service in Clarksville, MD about the safety concern. They haven't returned to me after I left numerous messages via text and their office answer machines. My truck acts very oddly at around 40 mph which is very hazard and I did send the video link but they rather not view it until I get an appointment. I did reach the Nissan Consumer Affairs that I have waited long enough but they told me to continue to contact the service and they are aware of it due to the log. I did send the video to both of them but they couldn't view it at their work computer. The truck drifted on the ramp around 40 mph as I captured it. See the video below, at :20, I kept on the gas for around mph, the RPM and MPH dropped and the slippery warning light and the brake system was triggered. I felt like my truck was pulled back when that happened. That is a bit dangerous to drive. I dont see any damages under my truck. Can you escalate the issue to the Nissan and the local service that they should take a look at and take care of it? The truck has plenty of problems and it is only two years old. My old Nissan car almost had no issues and ran hundreds of thousands miles. [XXX] -- INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

NHTSA ID

11583347

Incident

Mar 1, 2024

The parking brake has never been sufficient to prevent the vehicle from rolling slightly even after the vehicle has been placed in park. There is no audible alarm if you back up and the parking brake is set. The engine torque allows you to drive forward and reverse with ease even with the brake set, and a small dash light is the only indication that the brake is still set. When asking the dealership to adjust the brake and fix the issue they require the customer to pay for the service despite the brake being faulty from manufacture.

NHTSA ID

11576192

Incident

Nov 25, 2022

The driver assistance light keeps coming on. I get an error saying that the front sensors are blocked. It stops me from being able to use cruise control. I have to turn the truck of and then back on for it to go away but it always comes back.

NHTSA ID

11530024

Incident

Jun 28, 2023

CERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label” may be needed. HINT: Certification Label = FMVSS (Federal Motor Vehicle Safety Standards) label. These items may be available from Nissan by request if certain criteria are met. This bulletin lists the criteria and provides an application form for such replacements. · The “VIN Plate/Label” (metal plate or vinyl label) is attached to the instrument panel or body on the driver side at the base of the windshield (see Figure 1). · The “Certification Label” (vinyl adhesive label) is located on the lower area of the driver side B-Pillar (see Figure 1).

CERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label” may be needed. HINT: Certification Label = FMVSS (Federal Motor Vehicle Safety Standards) label. These items may be available from Nissan by request if certain criteria are met. This bulletin lists the criteria and provides an application form for such replacements. · The “VIN Plate/Label” (metal plate or vinyl label) is attached to the instrument panel or body on the driver side at the base of the windshield (see Figure 1). · The “Certification Label” (vinyl adhesive label) is located on the lower area of the driver side B-Pillar (see Figure 1).

AUTOMATIC EMERGENCY BRAKING WARNING LIGHT BLINKING APPLIED SYSTEMS: Vehicles equipped with a lane camera (see Figure 1) SERVICE INFORMATION If the Automatic Emergency Braking (AEB) warning light or is blinking (but not illuminated steadily) or the customer states it is blinking, and there are no related DTCs, inspect the windshield. A blinking AEB warning light may occur under the following conditions:  When contamination or foreign material adhere to the lane camera viewing window on the windshield.  When driving while it is snowing or when frost forms on the lane camera viewing window on the windshield.  When the lane camera viewing window on the windshield is temporarily fogged up. Figure 1 Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle. HINT: o Refer to the applicable ESM for diagnosis if DTCs are present in the Laser/Radar, ICC/ADAS, or Lane Camera systems. o For further information:  Refer to the following pages.  Use the search keyword “blinking” in the ESM.

INTELLIGENT CRUISE CONTROL INOPERATIVE AND AEB/FEB WARNING LIGHT ON OR RADAR OBSTRUCTION MESSAGE DISPLAYED WITH DTC C1A16 OR C2582 IF YOU CONFIRM IMPORTANT: The purpose of ACTION (on the next page) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to successfully completing this repair. Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle. The customer states that the ICC stopped working while driving, OR The customer states that the AEB/FEB warning light is ON, or turned ON, while driving (Figure 1), OR The message “Unavailable Front Radar Obstruction” or “Forward Driving Aids Temporarily Disabled Front Sensor Blocked See Owner's Manual” has displayed while driving (Figure 2). AND DTC C1A16, C1A16-97, C2582, or C2582-97 is the ONLY DTC stored. Figure 1 Figure 2 This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. Forward Driving Aids Temporarily Disabled Front Sensor Blocked See Owner’s Manual

FLUID LEAK FROM THE FRONT DIFFERENTIAL CASE ACTUATOR MOTOR PLASTIC THREADS SERVICE INFORMATION Figure 1 Figure 2 If the front differential has a fluid leak coming from the actuator motor plastic threads (Figure 1): a. Place an alignment mark on the splined actuator body and the gear carrier (Figure 2). b. Remove the actuator and thoroughly clean the threads, making sure not to allow RTV to fall into the differential case. c. Once clean, apply Three Bond sealant to the threads, and then reinstall the actuator motor, making sure to line up the alignment marks. d. Check the front differential gear oil level and top to specification. o Refer to the ESM: TRANSMISSION & DRIVELINE > DRIVELINE > FRONT FINAL DRIVE: MA235/MA210 > PERIODIC MAINTENANCE > FRONT DIFFERENTIAL GEAR OIL DO NOT replace the front differential due to a fluid leak from the actuator motor plastic threads unless there has been consequential damage due to fluid loss (bearing failure or gear noise) to the front differential.

DTC B00A0-00 STORED This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. IF YOU CONFIRM DTC B00A0-00 (OCCUPANT DETECTION SENSOR UNIT) is stored, AND OCS zero point reset cannot be performed, (continued on the next page)