2008 Nissan Maxima

THIS PE WAS OPENED FOR MODEL YEAR (MY) 2008 NISSAN MAXIMA VEHICLES BASED ON EARLY WARNING DATA THAT THE AUTOMATIC TRANSMISSION COOLER HOSE MAY HAVE PINHOLES AND/OR CRACKS RESULTING IN A TRANSMISSION FLUID LEAK.THE LEAKED FLUID CAN CONTACT THE EXHAUST SYSTEM AND IGNITE.NISSAN HAS SHOWN THAT THE ROOT CAUSE OF THE PINHOLES AND/OR CRACKS IN THE HOSE IS EXCESSIVE STRESS DURING THE MANUFACTURE FORMING PROCESS RESULTING IN HOSE DEFORMATION AT LOADING ONTO A MANDREL, OR DAMAGE DURING UN-LOADING.REGARDING LOADING STRESS, NISSAN STATES, WHEN EXCESSIVE STRESS IS APPLIED WHILE LOADING THE HOSE ONTO THE MANDREL, HOSE DEFORMATION (WHICH LOOKS LIKE A BULGE) CAN OCCUR AROUND THE BENDING AREA.A CRACK WILL START TO FORM ON THE INSIDE OF THE HOSE AT THE AREA OF DEFORMATION.REGARDING UNLOADING STRESS, NISSAN STATES, AFTER THE CURING PROCESS, IN SOME INSTANCES THE HOSE STUCK TO THE MANDREL TIGHTLY AND THE OPERATOR HAD TO APPLY A SIGNIFICANT AMOUNT OF FORCE TO PULL THE HOSE FROM THE MANDREL.IF THIS OPERATION WAS PERFORMED ROUGHLY, THE INTERIOR OF THE HOSE COULD BE DAMAGED BY THE MANDREL EDGE. NISSAN ALSO STATES, BECAUSE OF THE WAY THE HOSES RECEIVED INTERNAL DAMAGE, A DAMAGED HOSE WAS PRODUCED AS A RARE, RANDOM EVENT RATHER THAN SYSTEMATICALLY.THE TRANSMISSION HOSE SUPPLIER, COOPER STANDARD AUTOMOTIVE, IMPLEMENTED PROCESS IMPROVEMENTS THAT LIMIT EXCESSIVE STRESS ON THE HOSE DURING MANUFACTURE. NISSAN HAS SHOWN THAT THIS TRANSMISSION COOLER HOSE WAS ASSEMBLED ON MY 2007 AND MY 2008 MAXIMA VEHICLES.NISSAN REDESIGNED THE TRANSMISSION COOLER HOSE ON MY 2009 MAXIMA, AND THE HOSE IS MANUFACTURED BY A NEW SUPPLIER.NISSAN HAS ALSO SHOWN THAT THE LEAKS MOSTLY OCCUR WITHIN THE FIRST 2000 MILES OF SERVICE WITH A SEVERE DROP IN INCIDENTS BEYOND 2000 MILES OF SERVICE.MOST LEAKS HAVE ALREADY OCCURRED, AND THE ONE FIRE WAS MINOR. A SAFETY-RELATED DEFECT HAS NOT BEEN IDENTIFIED AT THIS TIME AND FURTHER USE OF AGENCY RESOURCES DOES NOT APPEAR TO BE WARRANTED.ACCORDINGLY THIS INVESTIGATION IS CLOSED.THE CLOSING OF THIS INVESTIGATION DOES NOT CONSTITUTE A FINDING BY NHTSA THAT NO SAFETY-RELATED DEFECT EXISTS.THE AGENCY RESERVES THE RIGHT TO TAKE FURTHER ACTION IF WARRANTED BY THE CIRCUMSTANCES.

Heavy Rust/corrosion/hole in driver & passenger floorboard. Visible from underneath vehicle when the vehicle is up on the lift. I’m concerned my feet will go through the floor. Inspected by an authorized auto body shop and they confirmed this is very unsafe and a manufacture defect.

NHTSA ID

11504265

Incident

Jan 22, 2023

THE CAR IGNITION WILL NOT LET ME TURN IT

NHTSA ID

11373110

Incident

Sep 24, 2020

Mileage

126,000 mi

AIRBAG LIGHT HAS TURNED ON. THEY WHERE NOT DEPLOYED. TRIED TO RESET THE LIGHT BUT IT STILL CAME ON. TRIED TO ERASE THE LIGHT WITH OBD2 READER BUT THE CODE NEVER SHOWED. THE LIGHT TURNED ON OUT OF NOWHERE. ITS BEEN ON FOR MONTHS.

NHTSA ID

11310262

Incident

Dec 2, 2019

Mileage

20 mi

VEHICLE STOPPED FORWARD MOVEMENT IN MIDDLE LANE OF I-95 NORTH. ENGINE REVOLUTIONS JUMPED TO RED ZONE BUT NO FORWARD MOVEMENT. HAD TO COAST, IN LIGHT TRAFFIC, TO EDGE OF ROADWAY MERGE LANE. ENGINE THEN DIED. ENGINE RE-STARTED ABOUT 35 MINUTES LATER AND TRAVELED TO US HWY 1 WHEN SAME THING HAPPENED. VEHICLE DIED IN OUTER LANE. STATE POLICE ARRIVED AND ASSISTED IN PUSHING VEHICLE TO BUSINESS SHOULDER/DRIVEWAY ENTRANCE. HAD VEHICLE TOWED APPROXIMATELY 30 MILES TO TRANSMISSION SHOP IN FREDERICKSBURG, VA WHERE THEY TOLD ME THE TRANSMISSION WAS GONE.

NHTSA ID

11282875

Incident

Sep 11, 2019

Mileage

219,000 mi

TL* THE CONTACT OWNS A 2008 NISSAN MAXIMA. THE CONTACT STATED THAT THE AIR BAG WARNING INDICATOR ILLUMINATED WHEN THE VEHICLE WAS STARTED. THE INDICATOR REMAINED ILLUMINATED FOR THE PAST WEEK. THE DEALER (94 NISSAN OF SOUTH HOLLAND, LOCATED AT 16269 VAN DAM RD, SOUTH HOLLAND, IL 60473, (708) 333-2000) WAS CONTACTED BY PHONE AND INFORMED OF THE FAILURE. THE CONTACT WAS INFORMED THAT A DIAGNOSTIC TEST SHOULD BE PERFORMED TO VERIFY THE CAUSE OF THE FAILURE, BUT THE CONTACT DECLINED. THE VEHICLE WAS NOT REPAIRED. THE MANUFACTURER WAS NOT INFORMED OF THE FAILURE. THE APPROXIMATE FAILURE MILEAGE WAS 96,000.

NHTSA ID

11244206

Incident

Aug 8, 2019

Mileage

96,000 mi

THE TIMING CHAIN TENSIONERS PREMATURELY WEAR, CAUSING A WHINING NOISE AS THE CHAIN RUBS AGAINST THE TENSIONER WHILE THE VEHICLE IS TURNED ON. THIS WEAR EVENTUALLY GRINDS THROUGH THE TENSIONER RESULTING IN COMPLETE ENGINE FAILURE WHICH CAN LEAD TO A CRASH OR INJURY. THIS BEGAN TO HAPPEN FOR ME JUST OUTSIDE OF THE MANUFACTURER WARRANTY, AND IS A COSTLY REPAIR FOR A PART OF THE ENGINE THAT SHOULD NOT HAVE TO BE MAINTAINED WITHIN THE ENGINES EXPECTED LIFETIME.

NHTSA ID

11192618

Incident

Mar 30, 2019

Mileage

70,000 mi

HAVE A 2008 NISSAN MAXIMA AND JUST FOUND OUT I NEED A TRANSMISSION AFTER ONLY HAVING IT 2YRS ..DEALER NEVER TOLD ME THAT IT HAD A PROBLEM WHEN HE SOLD TO ME HAD I KNOWN NISSAN HAD A PROBLEM WITH THIS MODEL I WOULD NEVER HAD PURCHASE IT...I NEED A WHOLE NEW TRANSMISSON AND FOR 3700 DOLLARS I FEEL NISSAN SHOULD RPLACE IT AT NO COST TO ME SINCE IT SEEMS THAT THIS ISSUE SEEMS TO BE WITH ALL THERE MODELS NOT JUST MINE...IT JUST CRAP THAT IM STUCK TRYING TO FIX IT...NISSAN NEEDS TO MAKE THIS PROBLEM OR RATHER FIX THIS ISSUE THAT IS SO COMMON IN THERE VECHICLE THEY NEED TO BE HELD ACCOUNTABLE ...CHECK ENGINE LIGHT CAME ON AND TOOK IT TO THE DEALER CAUSE IT WOULDNT SHIFT AND THERE IT WAS A BIG HEFT BILL TO TELL ME THAT I NEEDED A NEW TRANSMISSION AND HAD THE NERVE TO TELL ME NISSAN ARE KNOWN FOR BAD TRANSMISSION...NOT WHAT I WANTED TO HEAR...

NHTSA ID

11162962

Incident

Dec 5, 2018

Mileage

11,500 mi

FLOORBOARDS RUSTED OUT.

NHTSA ID

11152285

Incident

Nov 18, 2018

Mileage

159,623 mi

CERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label” may be needed. HINT: Certification Label = FMVSS (Federal Motor Vehicle Safety Standards) label. These items may be available from Nissan by request if certain criteria are met. This bulletin lists the criteria and provides an application form for such replacements. · The “VIN Plate/Label” (metal plate or vinyl label) is attached to the instrument panel or body on the driver side at the base of the windshield (see Figure 1). · The “Certification Label” (vinyl adhesive label) is located on the lower area of the driver side B-Pillar (see Figure 1).

CERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label” may be needed. HINT: Certification Label = FMVSS (Federal Motor Vehicle Safety Standards) label. These items may be available from Nissan by request if certain criteria are met. This bulletin lists the criteria and provides an application form for such replacements. · The “VIN Plate/Label” (metal plate or vinyl label) is attached to the instrument panel or body on the driver side at the base of the windshield (see Figure 1). · The “Certification Label” (vinyl adhesive label) is located on the lower area of the driver side B-Pillar (see Figure 1).

CAN COMMUNICATION – NETWORK DIAGNOSTIC FLOW CHART This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.

VEHICLE KEY NOT DETECTED / AUTHENTICATED, ENGINE WILL NOT START This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.

CAN COMMUNICATION CODES – DIAGNOSTIC TIPS AND GUIDELINES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.

WINDSHIELD CRACKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.