2011 Nissan Murano

I had a frontal crash in which I had a neck sprain and severe head injury due to the airbags not deploying

NHTSA ID

11744092

Incident

Jun 11, 2026

In July 2023, at 55,496 miles on the odometer, the original CVT transmission failed and was replaced at Port City Nissan (120 Spaulding Tpke N, Portsmouth, NH 03801), an authorized Nissan dealership, with a Nissan-supplied rebuilt CVT transmission at a cost of approximately $7,000. The rebuilt transmission was warranted for one year. Approximately 2.5 years and only 26,500 miles after installation, the rebuilt CVT transmission has failed again at approximately 82,000 miles. CVT transmission failure while driving presents a serious safety hazard, as the vehicle may lose power unexpectedly, particularly dangerous at highway speeds, during merges, or in intersections. Pattern of Defect: Nissan’s CVT transmissions have been the subject of widespread consumer complaints and multiple class action lawsuits across various model years. Significantly, Nissan recently updated its warranty on rebuilt CVT transmissions from one year to three years with unlimited mileage for replacements performed after July 2024. This warranty extension strongly suggests Nissan is aware of systemic premature failures in its rebuilt CVT units. The failure of a rebuilt transmission at only 26,500 miles indicates a fundamental quality control or design deficiency in the rebuilt units Nissan is supplying to dealerships. Safety Concern: Sudden CVT failure causes immediate loss of propulsion and can result in loss of vehicle control. This is particularly hazardous on highways, in heavy traffic, and during adverse weather conditions. Given the pattern of premature failure in Nissan’s rebuilt CVT units, I believe this constitutes a safety defect affecting a population of vehicles and warrants investigation. I request that NHTSA investigate Nissan’s rebuilt CVT transmission program and the adequacy of Nissan’s response to known premature failures.

NHTSA ID

11728892

Incident

Feb 1, 2026

The passenger airbag warning light illuminated and remains on. A Nissan dealer diagnosed the issue as a failure of the Occupant Classification System sensor in the passenger seat. This causes the airbag system to be disabled and could prevent deployment in a crash. I was informed that my 2011 Murano is not included in Nissan’s previous airbag/OCS recalls (such as 16V244), even thought the symptoms appear identical. Repair requires replacement or reprogramming of the seat/OCS components and is very expensive ($2000-$7000). This is a critical safety issue because the passenger airbag may not function at all. Based on similar complaints from other 2011 Murano owners, this my represent a widespread defect that warrants investigation and a recall. Safety needs to be a priority. We were originally told to reset the light by a series of steps involving turning the car on and off. The process worked on a previous incident but now the light remains solid red and reset does not work.

NHTSA ID

11699814

Incident

Sep 15, 2025

Hi i see this vehicle had a recall campaign previously under notice P1261/NTB12-003/NTB14-076. This campaign includes the replacement of the links and other items under this campaign. This vehicle is a convertible and the top frame is once again damaged due to the same recall for links. I recently took the vehicle to Lorenzo Nissan as the top is not working. They advised the frame links are bound, and the frame needs to be replaced. As this was covered under previous recall, the recall is obviously not adequate.

NHTSA ID

11610293

Incident

Aug 12, 2024

Dashboard light started flashing indicating airbag error. Light indicating passenger airbag inoperative on center stack illuminated. Dealership indicated error code B1018 per ESM diagnostic procedure and recommended replacing entire passenger side seat cushion and retesting. Uncertain if passenger side airbag sensor will prevent driver's airbag from deploying in accident.

NHTSA ID

11584830

Incident

Apr 17, 2024

Premature Subframe Corrosion: first noticed a knocking noise coming from under rear driver side area when going over bumps with our 2011 Murano. Then the knocking noise (metal on metal sound) got worse and then the back of our vehicle would sway uncontrollably side to side when pressing a little hard on the brakes. Brought the vehicle to the Nissan dealer and was told that the subframe had excessive corrosion and the vehicle is dangerous to drive. Our vehicle has only 106,800 miles and has been garage kept and serviced every year by the Nissan dealership. Discovered online that 100’s, probably 1000’s including unreported incidents of other Nissan owners having the same excessive subframe rusting problem. People have reported their wheels falling off and losing control of vehicle...easily can cause major accident with deaths. There was a recall in 2006 for the same subframe issue but for unknown reasons doesn’t include my vehicle. Nissan has not corrected the cause of the subframe defect and has allowed this dangerous situation to continue with their vehicles even after the recall ended. The parts & labor cost to replace the subframe is between $3,000-$4,000+ and Nissan Consumer Affairs says since there are no current recalls and the vehicle is out of warranty that they will do nothing for me. This subframe rusting started day 1 when we purchased the vehicle and prematurely got worse each year through the warranty period until it becomes a dangerous situation after the warranty period ends. The prior recall should be extended to cover more vehicles and Nissan should take responsibility for not correcting the premature subframe rusting issues. Nissan should cover the costs to repair the faulty subframe or at the least, Nissan should supply the parts to correct the issue and the owner be responsible for the labor.

NHTSA ID

11574299

Incident

Feb 4, 2024

35 complaints on the CVT transmission failing for the 2011 Nissan Murano, which could be a major safety issue while driving. We experienced 3 episodes and have not heard back from Nissan nor the NHTSA on recalling this car and having Nissan repair their known defect that could result in injury. We know the CVT transmission is known by Nissan to have reliability issues as they have recalled other years of CVT transmissions. Does someone have to be hurt before a fix is communicated to the owners of this vehicle. What a shame!

NHTSA ID

11573366

Incident

Aug 13, 2023

Rear subframe corrosion and break. Front subframe perfectly ok, obviously under the exact same driving conditions. There was a recall for this exact same problem on the Nissan Murano 2007 models but unfortunately no recall on the 2011 model.

NHTSA ID

11565656

Incident

Dec 10, 2023

CERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label” may be needed. HINT: Certification Label = FMVSS (Federal Motor Vehicle Safety Standards) label. These items may be available from Nissan by request if certain criteria are met. This bulletin lists the criteria and provides an application form for such replacements. · The “VIN Plate/Label” (metal plate or vinyl label) is attached to the instrument panel or body on the driver side at the base of the windshield (see Figure 1). · The “Certification Label” (vinyl adhesive label) is located on the lower area of the driver side B-Pillar (see Figure 1).

CERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label” may be needed. HINT: Certification Label = FMVSS (Federal Motor Vehicle Safety Standards) label. These items may be available from Nissan by request if certain criteria are met. This bulletin lists the criteria and provides an application form for such replacements. · The “VIN Plate/Label” (metal plate or vinyl label) is attached to the instrument panel or body on the driver side at the base of the windshield (see Figure 1). · The “Certification Label” (vinyl adhesive label) is located on the lower area of the driver side B-Pillar (see Figure 1).

CAN COMMUNICATION CODES – DIAGNOSTIC TIPS AND GUIDELINES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.

CAN COMMUNICATION – NETWORK DIAGNOSTIC FLOW CHART This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.

VEHICLE KEY NOT DETECTED / AUTHENTICATED, ENGINE WILL NOT START This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.

WINDSHIELD CRACKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.