2019 Nissan Murano

My car wouldn't start one morning. All lights lit up on dash, headlights continually started flashing and fan running under hood. I had to get to work so took a Lyft. I knew older son would be home from firestation around 830. When he got there battery completely dead. He jumped the car started right up. He drove to autozone to have battery checked (about 5 blocks). Battery was fine. He drove home. When I got home car started right up. I started it up again about 5 hours later. Went on my road trip I had planned about 2 hour drive. On Sunday I get in my car to leave and it does same thing it did Friday morning. I had to have car towed back to Nissan dealership in my hometown ( 700.00). Dealership had car for 3 days and came up with ABS module shorting to CAN unit. Only problem is the part is on backorder and Nissan can not even tell me when part will be in. This was almost 3 weeks ago. I have had no car for 3 weeks. I paid 555.00 for diagnostics and they want me to pay to order a part that isn't even available and was told Nissan has no idea when it will be. Why would I give them more money to order a part that is not even available. Is the part not available because this common problem? I do know there was recall on year before mine, 2018, and my car was manufactured 2/2019. My car is now in my driveway sitting, waiting to see if a part becomes available. But I feel this is an ongoing problem with Nissan.

NHTSA ID

11750449

Incident

Jun 26, 2026

Known issue with sunroof drains clogging and leaking into vehicle. Could Possibly cause electrical damage. The rear drains are clogged and are not accessible without removing interior trim/headliner to clear. A consumer should not have to spend $500+ to have sunroof drain lines cleared. Unknowingly, Back floor board was full of water and car was parked for multiple days. Upon opening the door, the moldy, mildew smell was overwhelming. I had to drive with windows down. When I returned home, that’s when I discovered the back floorboard soaked. I removed the floor mat and the backside was covered in mold. I can only imagine what is beneath the carpet or inside the walls due to this known leakage problem.

NHTSA ID

11743906

Incident

Apr 15, 2026

I am submitting this complaint regarding a manufacturing defect, specifically premature paint delamination of the exterior, factory-applied, Pearl White paint. The paint is lifting, bubbling, peeling and flaking exposing primer and metal. This damage did not result from impact, environmental exposure, improper maintenance, or misuse. The vehicle was inspected at a certified autobody repair facility and confirmed to be a factory defect. Nissan has declined to take responsibility for this defect despite the fact that this condition is a widely documented and recognized as mfg defect affecting Nissan vehicles across multiple model years. Images showing some of the damage are attached to this complaint.

NHTSA ID

11733310

Incident

Apr 13, 2026

Both headlight assemblies on my 2019 Nissan Murano have developed water intrusion inside the sealed LED headlight housing. The first headlight failed in March 2025 when moisture entered the assembly and caused the light to malfunction. The dealership diagnosed water intrusion into the sealed headlight assembly and advised that the entire unit must be replaced because the LED assembly is not serviceable. The repair estimate was approximately $2,400. The second headlight assembly has now developed the same issue, with visible moisture inside the housing. These headlights are sealed LED units with no replaceable bulbs. When moisture enters the assembly, the entire headlight must be replaced. This can lead to reduced nighttime visibility and potential headlight failure, which is a safety concern. The vehicle was purchased as a Certified Pre-Owned Nissan from a Nissan dealership, and I also purchased an additional extended “Gold” warranty at the time of sale through the dealership. Despite this, the headlight assembly failure was classified as “routine maintenance” and denied for coverage. Because these are sealed LED assemblies and not normal replaceable bulbs, water intrusion leading to failure does not appear to be routine maintenance. The fact that both headlights have developed moisture intrusion suggests a possible defect in the headlight housing seal. I am submitting this complaint so the issue of premature failure of sealed LED headlight assemblies due to water intrusion can be evaluated for potential safety concerns.

NHTSA ID

11721967

Incident

Mar 1, 2026

The contact owns a 2019 Nissan Murano. The contact stated that after refueling the vehicle, the fuel system became inoperable. There was no warning light illuminated. The contact stated that the fuel gauge reading failed to function properly after fueling. The fuel gauge previously displayed an estimated range of 400 miles before refueling; however, the range indicated approximately 300 miles after refueling. The contact stated that the fuel range calculation was inaccurate and changed while driving. The vehicle was taken to an independent mechanic however, the vehicle was not diagnosed or repaired. The mechanic referred the contact back to the dealer for assistance. The vehicle was taken to several dealers, but the vehicle was not diagnosed or repaired. The manufacturer was made aware of the failure. The approximate failure mileage was 37,000.

NHTSA ID

11718439

Incident

Feb 17, 2026

Mileage

37,000 mi

The contact owns a 2019 Nissan Murano. The contact stated while driving 45 MPH, the steering failed to turn in the intended direction. In addition, the contact stated that the steering wheel independently turned to the left or to the right. No warning lights were illuminated. The contact stated that the failure was persistent. The vehicle was taken to an independent mechanic, where a front alignment was performed, and all four tires were replaced. The failure reoccurred. The vehicle was taken to another independent mechanic, where it was diagnosed with a failed forward collision program. The contact was informed that the Forward Collision Avoidance software needed to be reprogrammed. The vehicle was not repaired. The contact was informed of an unknown recall with a similar failure description; however, the VIN was not included. The contact was advised to take the vehicle to the dealer for a diagnostic test. An unknown dealer was made aware of the failure, and an appointment was scheduled. The manufacturer was not made aware of the failure. The vehicle was not repaired. The failure mileage was approximately 48,000.

NHTSA ID

11698240

Incident

May 7, 2025

Mileage

48,000 mi

The contact owned a 2019 Nissan Murano. The contact stated while driving 65 MPH downhill around a bend, a deer was on the road and the vehicle struck the deer. The driver's side air bag and knee air bag deployed; however, the front passenger’s side air bag had not deployed. There were several unknown warning lights illuminated. The contact pulled the vehicle over to the side of the road. The contact attempted to reconnect the driver’s side seat belt; however, the seat belt failed to connect. A Police report was not filed. The contact was taken to Urgent Care by his wife. The contact had sustained a concussion. The vehicle was towed to the residence. The Insurance provider was contacted and deemed the vehicle a total loss. The Insurance provider towed the vehicle to a storage yard. The manufacturer was not notified of the failure. The failure mileage was approximately 68,000.

NHTSA ID

11650223

Incident

Mar 19, 2025

Mileage

68,000 mi

I was on Interstate traveling 65 MPH. sounded like gunshot or explosion. I pulled over as soon as I could. Walked around vehicle saw nothing, I stepped on side of car to look at roof. The sunroof was shattered. I drove back home and noticed very fine glass falling into the car while I was driving

NHTSA ID

11640961

Incident

Feb 5, 2025

CERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label” may be needed. HINT: Certification Label = FMVSS (Federal Motor Vehicle Safety Standards) label. These items may be available from Nissan by request if certain criteria are met. This bulletin lists the criteria and provides an application form for such replacements. · The “VIN Plate/Label” (metal plate or vinyl label) is attached to the instrument panel or body on the driver side at the base of the windshield (see Figure 1). · The “Certification Label” (vinyl adhesive label) is located on the lower area of the driver side B-Pillar (see Figure 1).

CERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label” may be needed. HINT: Certification Label = FMVSS (Federal Motor Vehicle Safety Standards) label. These items may be available from Nissan by request if certain criteria are met. This bulletin lists the criteria and provides an application form for such replacements. · The “VIN Plate/Label” (metal plate or vinyl label) is attached to the instrument panel or body on the driver side at the base of the windshield (see Figure 1). · The “Certification Label” (vinyl adhesive label) is located on the lower area of the driver side B-Pillar (see Figure 1).

TELEMATICS SERVICE INFORMATION HINT: This bulletin applies to vehicles equipped with a 4G network compatible TCU. TCUs compatible with 3G network only are no longer supported. SERVICE INFORMATION The APPLIED VEHICLES that come equipped with a factory installed SOS switch, located near the overhead map lamp, also come equipped with a wireless communication device called a Telematics Communication Unit (TCU). With an active NissanConnect® Services subscription, the TCU communicates with the NissanConnect® Services Data Center to provide various security and convenience services. This bulletin contains important service procedures that must be performed properly in order to set-up and maintain the telematics system for the APPLIED VEHICLES. · A table has been provided on the next page that lists the steps required to successfully configure a TCU after it has been replaced. · A CHECK-OFF SHEET has been provided on page 20 to print and check off steps as they are performed. Staple the completed CHECK-OFF SHEET to the repair order.

INTELLIGENT CRUISE CONTROL INOPERATIVE AND AEB/FEB WARNING LIGHT ON OR RADAR OBSTRUCTION MESSAGE DISPLAYED WITH DTC C1A16 OR C2582 IF YOU CONFIRM IMPORTANT: The purpose of ACTION (on the next page) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to successfully completing this repair. Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle. The customer states that the ICC stopped working while driving, OR The customer states that the AEB/FEB warning light is ON, or turned ON, while driving (Figure 1), OR The message “Unavailable Front Radar Obstruction” or “Forward Driving Aids Temporarily Disabled Front Sensor Blocked See Owner's Manual” has displayed while driving (Figure 2). AND DTC C1A16, C1A16-97, C2582, or C2582-97 is the ONLY DTC stored. Figure 1 Figure 2 This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. Forward Driving Aids Temporarily Disabled Front Sensor Blocked See Owner’s Manual

AUTOMATIC EMERGENCY BRAKING WARNING LIGHT BLINKING APPLIED SYSTEMS: Vehicles equipped with a lane camera (see Figure 1) SERVICE INFORMATION If the Automatic Emergency Braking (AEB) warning light or is blinking (but not illuminated steadily) or the customer states it is blinking, and there are no related DTCs, inspect the windshield. A blinking AEB warning light may occur under the following conditions:  When contamination or foreign material adhere to the lane camera viewing window on the windshield.  When driving while it is snowing or when frost forms on the lane camera viewing window on the windshield.  When the lane camera viewing window on the windshield is temporarily fogged up. Figure 1 Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle. HINT: o Refer to the applicable ESM for diagnosis if DTCs are present in the Laser/Radar, ICC/ADAS, or Lane Camera systems. o For further information:  Refer to the following pages.  Use the search keyword “blinking” in the ESM.

LANE CAMERA AIMING VEHICLE REFERENCE VALUES NOT IN ESM SERVICE INFORMATION If the lane camera requires aiming, the values in Table A on page 4 must be used.  For all other models/model years, consult the Electronic Service Manual (ESM).