2000 Toyota Tacoma

My son was driving the 2000 Toyota Tacoma across very smooth transition railroad tracks at about 25 mph and the right front ball joint failed, collapsing the suspension. He lost all control and the vehicle skidded to a stop. Had he been going any faster, the vehicle could have rolled over. I have reviewed the recalls for Toyota ball joints and found the there is a 50J recall for 2001-2005 Tacomas. Interestingly enough, the trucks/Tacomas from 1995-2000 have the same ball joint but were not included in the recall. I have tried to work with Toyota directly on this matter and they don't seem to want to help me. This is a safety issue and should be elevated to recall levels for all vehicles with this ball joint.

NHTSA ID

11738782

Incident

May 11, 2026

Broken frame due to rust

NHTSA ID

11722898

Incident

Mar 8, 2026

Vehicle will not pass safety inspection due to severe deterioration of the frame. The rest of the vehicle is still intact and operable.

NHTSA ID

11711836

Incident

Jan 19, 2016

The frame is rusted and I don't feel safe driving it at highway speeds. The electrical system The horn, air bags and radio don't work. Toyota said they had a program to repair the frame but they no longer honor it

NHTSA ID

11587164

Incident

Dec 2, 2023

The Frame of the truck in the back above the rear tire has rusted out and the Frame has broke.

NHTSA ID

11500019

Incident

Dec 26, 2022

I was recently told my a service center that the frame has great corrosion and is unsafe to drive. I am now aware of past warranty extensions for this matter but Toyota will offer nothing because for my year, this warranty coverage extension is expired. My year was also not part of the recent class action settlement with Toyota vehicles having rusted frames for later models (2004+). I'm left with a decent truck that is useless now. I don't understand why a rusted frame that could crack or break would not constitute a safety recall, which I understand does not expire like their well played warranty extension. It is evident my problem is what has been experienced by many others and just because their extended warranty has expired, does not mean the issue was not caused by their defective manufacturing. It is a matter of timing, and our safety. We had taken the truck for service as a Toyota dealer in late 2008, when the program was active, and they did not mention it and maybe there was no rust. Between 2008 and 2015 when it expired, service was not performed at a dealership and still nobody mentioned it. The truck has lived in NC until 2011 and Ohio (snow) from 2011 - 2018 and now back in NC. We had it at a Toyota dealership in 2019 and nothing mentioned. My husband was driving this truck on the freeway every week day for 50 miles round trip to work until last year. I was driving this truck within the past few weeks and was having service performed when my service center mentioned this and said I should not put any more money into it until a frame evaluation is conducted. I have not yet had the frame inspected by a frame shop or dealership as I attempted to ask Toyota pay for this to no avail. I'm currently awaiting a callback from a supervisor next Monday 11/14 after being denied any assistance by Toyota. It is well documented that trucks can last for several hundred thousand miles. A rusted frame at 167,000+ mi that can break at any time is a major safety concern.

NHTSA ID

11493071

Incident

Nov 3, 2022

Frame badly Rotted Purchased used, previous owner stated Frame recall/inspection was preformed Advertised on CL as NO ROT Frame is so bad it can not be safely driven

NHTSA ID

11462798

Incident

Dec 29, 2020

Owned Toyota Tacoma since 2005...recently took vehicle for muffler repair and discovered my frame was rusted out and in an unsafe condition, when I contacted Toyota @ customer assistance center they advised me that jy vehicle was too old to be covered by ant warranty...they also stated that they had contacted me about the defective steel used on these trucks....I have no proof of any notification, nor any recall of such notice Trucks like mine are still on the road with no problems, NOT MINE.....defective steel, improper rust prevention and lack of notification has left me with a vehicle I cannot drive, sell or repair... My safety and others on the road have been put at risk I would like my truck to get fixed and or compensated for the loss Toyota should stand by my vehicle ( in which they used substandard defective steel) regardless of any time factor. Courts have already determined their negligence....my vehicle should be included in this settlement

NHTSA ID

11462628

Incident

Apr 20, 2022

To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.

The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.

Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.

Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to remove the RapgardTM protective film within 90 days from initial application.

Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid. Follow the Repair Procedure in this bulletin to clean vehicles that may have been subjected to contamination by airborne iron particles such as rail dust during rail transportation or extended storage near industrial areas.

To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.