2005 Chevrolet Equinox

The ABS and traction control light came on and the vehicle sometimes doesn’t want to stop. The ABS kicks in and it takes a while for it to stop. It’s been twice where the vehicle ends up stopping in the middle of the intersection. Luckily no one was in front of us or coming the other direction.

NHTSA ID

11510082

Incident

Feb 20, 2023

The front Uni body to front engine/ transmission subframe mount area on left front and right front has rusted away the front 2 subframe mounting points are not connected to the uni body structure anymore due to corrosion damage causing a clunking noise while driving

NHTSA ID

11503701

Incident

Jan 25, 2023

Upon purchasing the vehicle from a buy here pay here they did not enclose any possible or current failures or problems with the vehicle. It started with the battery and within 2 months of purchase the check engine light came on. I had previously taken the vehicle to the dealership 3 times to assess the issue in which they repeatedly informed me nothing was wrong even though my check engine light was still on. A month later my CV axel went out and my alignment begin to come out of place. I took the vehicle to an auto shop in which they gave me an estimate of all the issues wrong with the car. I have since done repairs for what was necessary. I then began to look for a recall on the vehicle in which I found that there was a manufacturer recall that was I repaired regarding the Safety lock theft prevention. My ignition switch does not register properly when it is in “off mode”. The engine still runs and numerous attempts to stop it have failed. I contacted the dealership and they have not been willing to work with me in any way. I called the manufacturer number and was directed to a Chevrolet dealership near me in which they told me there are no recalls even though the NHTSA.gov website states there is as well as numerous others but that they have not been repaired. When I place my vehicle in the park position and remove the key from the ignition I am still able to move the gear shift into any selected gear, both with and without the normal brake and the emergency brake. I cannot afford to take it to a shop for repair but did take it to be inspected and was informed that this was an issue along with others and that it could be the reason my battery is not holding the power it needs and why I cannot remove my key sometimes as well as why the engine remains running after switching to the off position and removing my key.

NHTSA ID

11489278

Incident

Jan 10, 2022

The contact owns a 2005 Chevrolet Equinox. The contact stated that upon inserting the key into the ignition switch, it failed to function properly. There was no warning light illuminated. The vehicle was taken to the dealer where it was repaired under NHTSA Campaign Number: 04V302000 (POWER TRAIN). However, the failure reoccurred and the vehicle was taken to a second dealer, Countryside Chevrolet (71 Cat Creek Rd, Franklin, NC 28734), where the ignition switch was replaced for a second time under the recall. However, the failure persisted. The contact's daughter was unable to start the vehicle after several attempts. The contact contacted AAA who assisted her daughter to start the vehicle. The contact's daughter was able to continue driving. The manufacturer was notified of the failure but provided no assistance. The failure mileage was approximately 115,000.

NHTSA ID

11474154

Incident

Jul 15, 2010

Mileage

115,000 mi

The front sub frame where it bolts to the frame was completely rusted loose on the right side. The left side was barely holding on. This is what holds the motor up and control arms. My mechanics are telling me this is a common problem with Chevy Equinoxes. If it's common why aren't there recalls. My car only has 80,000 miles on it and my mechanic told me to scrap it. I'm a fabricator and welder. I welded a new frame under it but others can't do that and mechanics say it's a no fix.

NHTSA ID

11462993

Incident

Apr 29, 2022

The contact owns a 2005 Chevrolet Equinox. The contact stated that after starting the vehicle, the vehicle remained in LIMP mode. The contact stated that the check engine warning light was illuminated. The vehicle was taken to a local dealer but they are all unable to identify the issue. The manufacturer was not informed of the failure. The failure mileage was approximately 134,000. My 2005 Chevrolet Equinox has been going into limp mode after it's rained for the past 6 to 8 months, with flooding to the floor boards.

NHTSA ID

11448353

Incident

Aug 1, 2021

Mileage

134,000 mi

I was at the car wash, when the vehicle was near the end, suddenly the engine light and powertrain light came on then shut off automatically. I tried to restart, put the truck in the drive, but it wouldn't go like the gas wasn't reaching. So, I turned it off and restarted to see if the lights would go off, but it didn't. I was able to get it home safely. It doesn't take off right away when you gas the pedal. When I stop at the stop sign, it takes a minute before it starts moving again. This is not safe to drive, especially when making a turn, pulling off to traffic. If it doesn't take off in time, it could be an accident due this problem. I hope there's a solution this problem. Thank you in advance.

NHTSA ID

11447759

Incident

Jan 17, 2022

unknown replaced complete ac system/starter/new battery/ key inserted no response at all ingigtion seems to be a problem turn on key let go it was starting now nothing

NHTSA ID

11437047

Incident

Oct 11, 2021

This PI communicates the requirement to provide a pico file to receive diagnostic assistance from TAC.

This Preliminary Information communication provides information to the technician about the use of J-35616-64B and Mini 50 terminal test probe, replacement terminals, and terminated leads.

This Preliminary Information communication provides information to the technician about the use of J-35616-64B and Mini 50 terminal test probe, replacement terminals, and terminated leads.

This Preliminary Information communication provides information to the technician about the use of J-35616-64B and Mini 50 terminal test probe, replacement terminals, and terminated leads.

This Preliminary information communicates to dealership technicians that they will need to perform this step prior to performing any programming on replacement radios.

This Preliminary Information communication provides information to the technician about vehicles that have an unusual noise and is difficult to identify, isolate or pinpoint. Technician should get record a sound clip or take a video of the noise for assessment by engineering. Technician will need to call General Motors Technical Assistance Center for further assistance.