RoadVitals

2010 Ford F-350 Sd

Recalls, owner-reported complaints, investigations and safety data

Data refreshed

Owner complaintsComplaints are reports submitted to NHTSA by owners and drivers. NHTSA does not verify most reports before publishing them, and a complaint does not establish that a defect exists. Volume is influenced by how many of a vehicle were sold, how long it has been on the road, and how much attention an issue has received.
50
Latest Jul 29, 2023
Safety recallsA safety recall is issued when a manufacturer or NHTSA determines that a vehicle has a safety-related defect or does not comply with a federal motor vehicle safety standard. Recall repairs are free. Whether a specific vehicle is covered depends on its VIN — a recall listed for a model year does not necessarily apply to every vehicle of that year.
7
Latest Dec 9, 2020
InvestigationsNHTSA opens an investigation to examine whether a safety defect may exist. An open investigation is not a determination that a defect exists, and many investigations close without a recall. Investigations can, however, lead to one.
0
Crash or fire reportedComplaints whose submitter recorded that a crash or a fire occurred. These are the reporter's own answers on the NHTSA form, not verified findings.
2
1 injuries, 0 deaths reported

Overview

Our database contains 50 NHTSA owner-reported complaints for the 2010 Ford F-350 Sd, most frequently naming the suspension, steering and other / unspecified categories. 7 safety recalls have been issued covering this model year; and 43 manufacturer communications are on file.

Complaints are reports submitted by owners and drivers to NHTSA. They are not verified and do not establish that a defect exists.

What owners report

Complaints grouped by the component NHTSA recorded

Percentages are of component mentions. A single complaint can name more than one component, so these do not sum to the total complaint count.

Safety recalls

7 campaigns cover this model year

View all 7

Recalls apply to specific vehicles, not to every vehicle of a model year. Check your VIN with NHTSA or your manufacturer's dealer to confirm whether a recall affects your vehicle.

Check a VIN on NHTSA.gov
20E090000

EQUIPMENT; STEERING; SUSPENSION:FRONT:STABILIZER BAR

Dec 9, 2020
102 units potentially affected
The defect: Icon Vehicle Dynamics, LLC (Icon) is recalling all 05-UP FSD 2.5 Centerline Stabilizer Kits with part number 65050. The kits were sold as an accessory for certain 2005-2021 Ford F-250 4X4 and F-350 4X4 pickup trucks. The foam ring inside the stabilizer "through shaft" may block the piston ports, possibly causing the steering to lock up.
The risk: If the steering locks, it can increase the risk of a crash.
The remedy: Icon will notify owners, and dealers will install a new shock assembly with a revised foam ring and steel support disc, free of charge. The recall began December 21, 2020. Owners may contact Icon customer service at 1-951-689-4266.
Icon Vehicle Dynamics, LLCView on NHTSA.gov
14V360000

EQUIPMENT

Jun 23, 2014
10 units potentially affected
The defect: Palfleet Truck Equipment Company, LLC (Palfleet) is recalling certain model year 2009-2013 Ford F-350, F-450, and F-550 super duty vehicles modified by Palfleet and equipped with certain Muncie Power Products PTO Assemblies. In the affected vehicles, oil may leak from the PTO pressure switch onto a thermal blanket covering the exhaust.
The risk: The leaking oil may soak into the thermal blanket covering the exhaust, which when combined with heat from exhaust, may result in an increased risk of fire.
The remedy: Palfleet will notify owners, and dealers will install a new pressure switch kit that moves the switch away from the exhaust system, free of charge. The recall began on July 29, 2014. Owners may contact Palfleet customer service at 1- 502-376-2458.
Palfleet Truck Equipment Company, LLCView on NHTSA.gov
14V328000

EQUIPMENT

Jun 13, 2014
21 units potentially affected
The defect: Iowa Mold Tooling Co., Inc. will notify owners and dealers to inspect the Muncie PTO pressure switch to determine if it is from the range of defective switches and if required, remove the pressure switch assembly and put a plug in the port where the PTO switch had been installed. This switch was never being utilized. This will be done free of charge. The recall is expected to begin in mid-July 2014. Owners may contact Iowa Mold Tooling Co., Inc. at 1-800-247-5958.
The risk: The leaking oil may soak into the thermal blanket covering the exhaust, which when combined with heat from exhaust, may result in an increased risk of fire.
The remedy: Iowa Mold Tooling Co., Inc. will notify owners, and dealers will install a new pressure switch kit that moves the switch away from the exhaust system, free of charge. The recall began on July 28, 2014. Owners may contact Iowa Mold Tooling Co., Inc. at 1-800-247-5958.
Iowa Mold Tooling Co., Inc.View on NHTSA.gov

Recent owner complaints

Reports submitted to NHTSA, shown in the owner's own words

View all 50
SteeringSuspension
Filed Jul 29, 2023

Purchased truck July 1st 2023..after 2 days of owning I’ve experienced death wobble at 48-55mph. It caught me way off guard as I was hauling 40ft travel trailer and family in truck. Truck is currently back at dealership receiving the recalled parts for the newer trucks and have to pay over $3500 in repairs…within the 1200 miles I driven the truck had the death wobble 7 times. Please advise

NHTSA ID
11535197
Incident
Jul 13, 2023
SteeringSuspension
Filed Aug 17, 2022

While on highway, experienced an uncontrolled suspension vibration commonly know as the death wobble. It required me to slow down to 25mph on the highway to stop the uncontrollable vibration. This led to a chaotic situation with cars and trucks around me at the time.

NHTSA ID
11479740
Incident
Aug 16, 2022
Suspension
Filed Apr 20, 2022

The contact owns a 2010 Ford F-350 SD. The contact stated that while driving over a bump in the roadway at high speeds, the vehicle intermittently experienced the death wobble without warning. The shaking continued until the vehicle had slowed down and the contact was able to regain control of the vehicle. The contact notified the dealer and was informed that a diagnostic test needed to be performed to determine the cause of failure. The manufacturer was not notified of the failure. The vehicle was not repaired. The failure mileage was approximately 70,000. The VIN was not available.

NHTSA ID
11461517
Incident
Aug 18, 2021
Mileage
70,000 mi
SteeringSuspension
Filed Aug 6, 2021

Truck starts Violently shaking on highway

NHTSA ID
11428033
Incident
Aug 6, 2021
SteeringSuspension
Filed Jul 15, 2021

The death wobble. It happens on the freeway. You have to almost come to a stop. A major HAZARD!!! Happen s going over train tracks, bumps on the road. It's soooo scary and dangerous! Can we ford owners file a class action lawsuit against Ford? Please help. Every time we drive it's scary and dangerous. We're always afraid to haul or drive please help us get this fixed!

NHTSA ID
11424988
Incident
Jul 15, 2021
Other / unspecifiedSteering
Filed Jun 13, 2021

Two incidents of front-end wobble at hwy speeds (65 & 70 mph) that caused violent vibration-shaking of steering wheel, on April 7, 2021 and June 11, 2021. June occurrence happened following pothole strike, lasting +10 seconds with vibration settling after achieving speeds <40 mph. Dealership appointment made for 17 June 2021, suspension check.

NHTSA ID
11420747
Incident
Jun 11, 2021
SteeringSuspension
Filed Mar 22, 2021

WHILE DRIVING THIS TRUCK AT HIGHWAY SPEED AND HITTING A BUMP THE STEERING WHEEL WILL SHAKE UNCONTROLLABLY. THERE IS NOTHING I CAN DO BUT HOLD ON AND LET OFF THE ACCELERATOR TILL IT STOPS. THIS IS EXTREMELY DANGEROUS AS LOSS OF CONTROL AND HAVING TO SLOW DOWN MAKES IT LIKELY TO CAUSE AN ACCIDENT. PLEASE HELP!!!!

NHTSA ID
11404173
Incident
Jul 2, 2020
Mileage
20,000 mi
EngineSuspension
Filed Feb 21, 2021

EXHAUST MANIFOLDS CRACKED ON BOTH SIDES OF MOTOR. DEATH WOBBLE IN FRONT SUSPENSION,FOUR WHEEL DRIVE. DRIVING ON INTERSTATE DOING 70 MPH

NHTSA ID
11397208
Incident
Feb 3, 2021
Mileage
76,000 mi

Manufacturer communications

A bulletin sent by a manufacturer to its dealers. Not a recall, and repairs are not necessarily free.

SSM 54601

ELECTRICAL SYSTEM; STRUCTURE:BODY

Ford and Lincoln vehicles equipped with wired keyless entry keypad systems and accessory wireless keyless entry keypad systems may or may not come with a wallet card containing the master code. Unlike the integrated wired keypad, the accessory wireless keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool or from the label printed on the body control module (BCM). The Factory Keyless Entry Code application within the diagnostic scan tool will not provide an applicable master code for the accessory wireless keypad. If the wallet card for an accessory keypad is not available, the "Wireless RF Keypad Diagnosis Guide" can be referenced and provides direction on how to retrieve the master code. This guide is located under the Workshop Manual tab > Accessories > Installation > Wireless RF Keypad Diagnosis Guide > PPT C > Step C2.<br /><br /> Note: The only available keypad for some vehicles from the assembly plant is the accessory wireless keyless entry keypad. The integrated wired keypad cannot be installed on vehicles not equipped from the factory with a wired keyless entry k

SSM 52476

EQUIPMENT

All accessory stick-on keyless entry keypads come with a wallet card containing the master code. If the accessory keypad was factory installed, this card will be placed in the glove box and should be handed to the vehicles owner during initial delivery. Unlike the integrated (wired) factory keypad, the accessory keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool. If the wallet card for an accessory keypad is lost, follow these steps to recover the code. Dealer Key Code access is granted through the Dealer Program Enrollment System (DPES); dealership management can authorize users. The authorized user must go to FMCDealer.com > Parts and Service > Parts Product Line Information > Keys/Entry Devices > Aftermarket Keyless Entry Keypad Code Access. Follow the instructions on the screen to obtain the master code for the accessory keypad.

SSM 49495

EQUIPMENT

Some 2005-2021 F-Super Duty 4x4 vehicles operated in extreme dust, mud or tar sand conditions may exhibit accelerated 4x4 vacuum hub seal and or wheel bearing wear as a result of harsh operating conditions. A knuckle seal shield kit is now available for customer purchase. The kit is designed for severe duty and is non warrantable. The knuckle seal shield kit GC3Z-54024A38-A includes an installation instruction sheet

SSM 48494

SUSPENSION

Some 2005-2020 F-Super Duty 4x4 vehicles operated in extreme dust, mud or tar sand conditions may exhibit accelerated 4x4 vacuum hub seal and or wheel bearing wear as a result of harsh operating conditions. A knuckle seal shield kit is now available for customer purchase. The kit is designed for severe duty and is non warrantable. The knuckle seal shield kit GC3Z-54024A38-A includes an installation instruction sheet

SSM 47979

SUSPENSION; SUSPENSION:FRONT:WHEEL BEARING

Some 2005-2019 F-Super Duty 4x4 vehicles operated in extreme dust, mud or tar sand conditions may exhibit accelerated 4x4 vacuum hub seal and or wheel bearing wear as a result of harsh operating conditions. A knuckle seal shield kit is now available for customer purchase. The kit is designed for severe duty and is non warrantable. The knuckle seal shield kit GC3Z-54024A38-A includes an installation instruction sheet

SSM 47976

POWER TRAIN

On vehicles equipped with an automatic transmission it is imperative that the converter pilot hub be greased with Motorcraft Multi-Purpose Grease Spray XL-5-A even if grease was not applied from the factory. Also verify that the engine/transmission alignment dowel pins are present as well as the engine crankshaft dowel pin, if equipped, when installing the transmission. Failure to adequately lubricate the converter hub greatly increases the likelihood of the flexplate cracking in the future. Missing dowels may cause a misalignment issue also resulting in a premature failure. Refer to Workshop Manual (WSM), Section 307-01.

Manufacturers file copies of the bulletins they send to dealers with NHTSA. These often describe diagnostic or repair procedures for a known condition. They are not recalls: repairs described in a bulletin are usually only free if the vehicle is still under warranty or the manufacturer has extended coverage.

Compare model years

Complaint and recall counts across every year of this model

Ford F-350 Sd by model year
YearComplaintsRecallsInvestigationsIssue Index
2026640—
2025136065.1
2024433060.4
20233915053.1
202210717055.5
20219415162.7
202018516367.0
201946512358.9
201819910358.1
201757214358.6
20162084154.2
20152074259.4
2014751—
20139101—
20122910150.4
2011438147.6
2010Viewing507048.3
2009195045.4
20081011147.5
2007252251.0
20061272250.7
20052174255.4
20041303252.4
20031325558.2
20021244462.0
20011583862.5
20001573559.7
19991423561.0
1998313—
1997321—
1996011—
1995211—
1994010—
1993010—

Higher-selling and older vehicles accumulate more reports. Counts are not failure rates and are not directly comparable between vehicles that sold in very different numbers. Older model years have had longer for reports to accumulate.