2022 Hyundai Elantra

On August 8, 2022, the Office of Defects Investigation (ODI) opened this Recall Query (RQ) based on 3 incidents alleging front seat belt pretensioners that may rupture during deployment, on model year (MY) 2020-2022 of various Hyundai and Kia Models, resulting in 3 injuries (note: one incident occurred outside the U.S. and its territories).Between October 2021 and March 2023, Hyundai and Kia have filed the following 11 safety recalls for pretensioner rupture: NHTSA Recall No. 21V-796, 22V-069, 22V-123, 22V-127, 22V-218, 22V-354, 22V-447, 22V-458, 22V-816, 23V-094, and 23V-210.Hyundai/Kia have stated that the abnormal deployment of the pretensioners is due to over-pressurization of the pretensioner pipe that can cause metal fragments to enter the vehicle occupant compartment, which can result in injury to vehicle occupants.The various makes/models covered by the above recalls include approximately 405,900 certain 2020-2022 Hyundai Accent, 2021-2022 Hyundai Elantra and Elantra HEV, 2021-2022 Hyundai Santa Fe HEV, 2022-2023 Hyundai Santa Fe PHEV, 2020-2022 Hyundai Venue, 2021-2023 Genesis G80, 2023 Genesis G80 EV, 2023 Genesis G90, 2023 Genesis GV60 EV, 2022-2023 Genesis GV70, 2021-2023 Genesis GV80, 2021-2022 Kia Sorento HEV, and 2022 Kia Sorento PHEV.In response to ODI's investigation, in December 2022, Hyundai notified ODI that they would be conducting testing to validate subject vehicle seat belt pretensioners. This evaluation included sled testing and software testing which was performed by Hyundai and its suppliers. The tests were intended to evaluate pretensioner deployment characteristics based on the unique deployment signature of the subject and peer vehicles. ODI met with representatives from Hyundai on several occasions during the investigation to discuss testing progress and data. As a result of the testing, Hyundai was able to simulate the pretensioner failures. It was determined by Hyundai during testing, the front driver-side and/or passenger-side seat belt pretensioners may explode upon deployment in the event of a crash which can cause metal fragments to enter the vehicle occupant compartment.Hyundai thus notified ODI of their decision to proceed with a safety recall, to expand the scope of the previous safety actions.In view of the recall actions taken by Hyundai and Kia, ODI concerns have been addressed. The agency reserves the right to take additional action if warranted by future circumstances.

Transmission slippage, near failure, unable to accelerate safely past 20mph. Need to floor the gas peddle which causes me to go over the desired speed.

NHTSA ID

11755080

Incident

Aug 5, 2026

I own a 2022 Hyundai Elantra with only 72,000 miles my check engine light came on for the code p048900 for the Egr valve. It is no longer covered by any warranties but other year models have been recalled due to the same issue.

NHTSA ID

11754616

Incident

Aug 1, 2026

Federal Safety Recall Fraud and Vehicle Endangerment Report Vehicle: 2022 Hyundai Elantra Blue Hybrid | Involved Dealerships: Earnhardt Hyundai North Scottsdale & Larry H. Miller Hyundai Peoria This complaint documents severe federal safety recall fraud and mechanical endangerment by authorized manufacturer franchise dealerships. In April 2025, Earnhardt Hyundai took physical possession of my vehicle for a federally mandated Hydraulic Electronic Control Unit (HCU) braking/cruise control safety recall. Staff verbally verified the recall was complete, but the physical invoice and subsequent written email admission from Service Drive Manager [XXX] confirmed the safety repair was completely omitted with "no excuse."To resolve this braking risk, on April 22, 2026, I brought the vehicle to Larry H. Miller Hyundai Peoria to have the uncompleted HCU safety recall corrected. Subsequently, on June 17, 2026, I returned to the Peoria facility for a warranty deck lid repair and a scheduled oil change.Upon releasing the vehicle on June 17, the Peoria service department actively jeopardized my hybrid engine integrity by installing an incorrect, out-of-spec oil fluid weight (5W30) and releasing the vehicle with a completely loose, unsealed engine oil cap. This gross negligence forced me into a dangerous 140-mile high-altitude mountain highway transit ([XXX] to Flagstaff) with a compromised engine bay, creating an immediate engine fire hazard and risk of sudden highway power failure. The loose cap and incorrect fluid were independently verified and caught on video by Milestone Auto Repair in Flagstaff.The manufacturer's franchise network is falsifying federally mandated safety recall records and releasing vehicles in life-threatening, non-compliant conditions. I'm requesting an immediate NHTSA investigation on both dealerships. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

NHTSA ID

11745832

Incident

Apr 2, 2026

My car was hit from the rear by another vehicle while I was traveling with my [XXX] daughter. The impact was very strong, and one of the tires came off. None of the airbags deployed, and I feel there may have been an issue with the airbag system. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

NHTSA ID

11745326

Incident

Jul 7, 1988

Backup camera shows only black screen with dark gray guidelines with display moving across the screen then resetting to start moving again. No availability visible for backing up.

NHTSA ID

11741204

Incident

May 31, 2026

Description of Incident: The vehicle is experiencing significant engine oil dilution by gasoline. Upon inspection of the dipstick, the oil level is consistently found to be well above the "Full" mark, and the oil emits a strong, pungent odor of raw fuel. This indicates that unburnt gasoline is bypassing the piston rings and entering the crankcase during normal operation, particularly in colder temperatures or during hybrid engine cycling. Safety Risk: The dilution of engine oil with fuel significantly reduces the oil's viscosity and lubricating properties. This creates a high risk of premature engine wear, rod bearing failure, and sudden engine seizure or stalling while the vehicle is in motion. A sudden loss of motive power at highway speeds poses a severe crash hazard to myself and other motorists. Attempts to Correct: I have noted that similar Hyundai models using the 1.6L platform (such as the Tucson Hybrid via TSB 23-EE-002H) have received software updates to address this specific issue. However, when contacting the dealer regarding my Elantra Hybrid, I was informed that no such software fix or service campaign currently exists for the CN7 Elantra model, leaving the safety defect unaddressed. Expected Resolution: Hyundai should be required to issue a recall or technical service bulletin for the Elantra Hybrid to update the Engine Control Unit (ECU) logic, ensuring the engine reaches and maintains temperatures necessary to prevent fuel accumulation in the oil.

NHTSA ID

11735854

Incident

Jan 7, 2026

The contact owns a 2022 Hyundai Elantra. The contact stated that while driving at an undisclosed speed, the check engine warning light illuminated. Additionally, there was an abnormally strong gasoline odor coming from the vehicle. The vehicle was taken to an independent mechanic; however, the vehicle was not formally diagnosed. The contact was informed that there was a crack in the engine, causing a leak. The vehicle was then taken to the dealer, but it was not diagnosed or repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 23,825.

NHTSA ID

11730787

Incident

Apr 13, 2026

Mileage

23,825 mi

The contact owned a 2022 Hyundai Elantra. The contact stated while the vehicle was parked, the contact stated that a relative had entered the residence and informed the contact that the vehicle was on fire. The vehicle was unoccupied. The contact stated that no warning lights were illuminated prior to the failure. The fire department arrived and extinguished the fire. A fire report was filed. In addition, the contact stated that the vehicle was parked five minutes prior to the failure. The vehicle was towed to a local tow yard. The manufacturer was made aware of the failure, and a case was filed. The contact was advised to have the vehicle towed to the dealer for inspection. The failure mileage was approximately 40,000.

NHTSA ID

11721407

Incident

Feb 1, 2026

Mileage

40,000 mi

Some vehicles may exhibit difficulty starting in cold weather. This bulletin provides the procedure to perform an inspection on the starter magnetic switch for potential freezing and, if necessary, replace the starter magnetic switch (solenoid) assembly.

The National Highway Traffic Safety Administration (NHTSA) has identified the presence of substandard and dangerous driver’s-side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN). These inflators were not supplied, approved, or authorized by the vehicle manufacturers and have primarily been found in vehicles that previously experienced a crash and underwent airbag replacement using non-genuine parts. These dangerous inflators have ruptured during deployment, posing a serious risk of injury or death due to metal fragments entering the vehicle cabin. To date, Hyundai is aware of three people who have died while driving a Hyundai vehicle with one of these substandard replacement airbag inflators that deployed in what likely would have been a survivable crash. NHTSA has issued a public advisory urging vehicle owners and service professionals to have vehicles inspected if there is reason to believe that a non-genuine replacement airbag may have been installed. Vehicles with salvage or rebuilt titles, prior airbag deployments, or unknown repair histories may present a higher risk. NHTSA strongly cautions against self-inspection by vehicle owners and recommends inspection by trained technicians.

The National Highway Traffic Safety Administration (NHTSA) has issued an urgent safety advisory regarding dangerous, counterfeit driver‑side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN), that have been identified in U.S. vehicles following prior crashes, theft, or non‑certified airbag replacements. These inflators are not approved for use, may rupture during deployment, and have caused serious injuries and fatalities. Please see attached announcement, provided by NHTSA, for more details.

Some 2019MY and newer vehicles equipped with a front view camera may illuminate certain warning lights and trigger DTC C272246 fault code for the front camera. In the following cases, the front camera auto-calibration range may be exceeded while driving: • If the front camera is not properly installed and is completely or partially detached. • In case of excessive changes affecting the vehicle's balance (e.g., loading excessively heavy cargo in a specific location of the vehicle, or significant under-inflation of the tires). • Specific road conditions affecting the vehicle's balance (e.g., excessive road crown) This TSB provides instructions on how to service the vehicle when the front camera related warning light(s) are triggered due to system out of calibration (DTC_C272246).

In response to this trend, we engineered a software upgrade that addresses the social media theft method and made it available to owners of eligible models free of charge at authorized Hyundai dealers since early 2023. In addition to the anti-theft software, we’ve developed a new zinc-reinforced ignition cylinder protector hardware upgrade that can be installed at the ignition cylinder location to provide additional protection against the social media theft method. Because your Hyundai vehicle with the VIN listed above (“Subject Vehicle”) was not factory-equipped with an engine immobilizer and was previously eligible for the software upgrade, you are now eligible until March 31, 2027 to have the ignition cylinder protector installed — if you request it — at no cost to you through an authorized Hyundai dealership.

Some Elantra (CN7, CN7A), Kona (OS, SX2), and Sonata Hybrid (DN8 HEV) vehicles equipped with 2.0L engines may illuminate a warning lamp for DTC P218100 (Cooling System Performance) related to the Integrated Thermal-Management Module (ITM). Follow the service procedure in this bulletin to install a spring onto the thermostat within the ITM, in order to prevent premature opening, and perform an ECU software update on affected vehicles.