2010 Hyundai Elantra

The Office of Defects Investigation (ODI) of the National Highway Traffic Safety Administration (NHTSA) received a petition letter dated October 10, 2021, requesting an investigation of possible defects in the electronic throttle control (ETC) system on certain Kia vehicles resulting in the opening of DP21-003. Accordingly, Model Year (MY) 2005-2016 Kia Optima/K5, MY 2006-2015 Kia Sorento, MY 2007-2016 Hyundai Elantra, MY 2007-2016 Hyundai Santa Fe, MY 2006-2015 Hyundai Sonatas are all part of the subject population. The petition was originally filed as a Vehicle Owner Questionnaire that can be reviewed at NHTSA.gov under reference (ODI) number 11439675.On November 12, 2021, ODI opened Defect Petition DP21-003 to evaluate the petitioner?s request. ODI performed trend analyses of the VOQs related to vehicle speed control issues for all the subject vehicles and found that none of the 52 Model/Model Year Hyundai/Kia vehicles demonstrated any actionable trend that warranted an investigation.Petitioners submitted 1119 VOQs and non-VOQ cases in which sudden uncommanded acceleration (SUA) or loss of motive power (LOMP) incidents were alleged.For the 1119 reports, 220 were incidents involving crashes, from which 69 subject Hyundai-Kia vehicles were inspected by Hyundai/Kia dealer technicians, Hyundai/Kia engineers, and/or third-party representatives.ODI found the inspections identified no vehicle defects related to the ETC system.Of the 220 crash-involved reports, 13 Event Data Recorder (EDR) records were downloaded successfully and 11 of those indicated driver error: (i.e.) pedal misapplication.A condition where the accelerator pedal is mistakenly applied instead of the brake pedal when the driver wants to stop the vehicle.In addition, ODI reviewed a scientific journal paper published in Forensic Science International in 2016 by Mr. Park et al ., as well as related test videos. ODI does not believe there is any evidence of uncontrollable SUA occurrences in any of the tests reviewed. NHTSA's Office of Vehicle Safety Compliance (OVSC) reviewed the allegations regarding the potential noncompliance with Federal Motor Vehicle Safety Standard No. 124.Based on the information provided, the Agency concludes there is insufficient information for us to determine if a possible non-compliance exists.Finally, both Hyundai and Kia informed ODI that all their vehicles manufactured after 2012 were equipped with an ETC management system, in which the engine speed will go to idle when the system sees signals from both the brake pedal and accelerator pedal at the same time; this is commonly known as the brake-throttle override system.After thoroughly assessing the material submitted by the petitioner, information already in NHTSA's possession, information submitted by Hyundai and Kia in response to an Information Request letter, and the potential risks to safety implicated by the petitioner's allegation, NHTSA does not believe that a formal investigation is warranted. After full consideration of appropriate factors, the petition is denied. A Federal Register Notice (FRN) further detailing NHTSA?s reasons for denial of the petition will be published.

The contact owns a 2010 Hyundai Elantra. The contact recently purchased the vehicle. The contact researched and became aware that the VIN was included in NHTSA Campaign Number: 13V113000 (Exterior Lighting), 15V100000 (Steering) and 20V061000 (Service Brakes, Hydraulic). The vehicle was taken to the dealer, where the contact was informed that the repairs were unable to be completed because the required tools were unavailable. The manufacturer was not contacted. The contact had not experienced a failure.

NHTSA ID

11755010

Incident

Aug 5, 2026

I am submitting this complaint regarding a possible airbag/SRS system failure involving a Hyundai vehicle. On May 26, 2026, the vehicle was involved in a severe front-end collision resulting in major structural damage to the front end, including the hood, bumper reinforcement, radiator support, and engine compartment. Despite the significant impact damage, none of the airbags deployed, including the driver or passenger frontal airbags. The collision was serious enough that the occupants could have suffered severe injury or death. Based on the extent of the damage, I believe the airbag system, crash sensors, or airbag control module may have malfunctioned or failed to operate properly. Photos documenting the damage are available. I am requesting that NHTSA investigate this incident for potential safety defects involving: * Airbag non-deployment * Crash sensor failure * SRS system malfunction * Airbag control module defects I am also requesting review of whether similar complaints or investigations exist involving this Hyundai model or related vehicles.

NHTSA ID

11740444

Incident

May 26, 2026

Upon arriving at my condo after work, pulled into the driveway that goes to 2nd floor underground. Had my foot on the brake and when the garage door started to rise, I put foot on gas pedal to inch forward and the gas pedal went all the way down. Braking did not stop the car. The car crashed through the garage door but that did not stop car. It continued till the car hit a cement boulder which finally stopped it. After car hit the cement boulder it continued to try and run. Obviously a huge risk factor when your car accelerates and can't be stopped. If that had happened on the street, I can't even imagine what could have happened. The car was totaled so I doubt if it has been checked by anyone. And there was no warning at all. Had not noticed anything unusual that give me any hint that the gas pedal would stick all the to the floor. When I researched unexplained acceleration there was reference to the throttle and 4 or 5 reasons why it would accelerate on its own.

NHTSA ID

11738725

Incident

Apr 23, 2026

Vehicle developed clunking noise in the steering. Was told it was coupler issue. The dealership, Nlorthbay Hyundai, in Petaluma, California, was negligent in the replacement, creating a grinding metal on metal noise, and damaged the steering column as well. The Dealership refused failed to correct the damage and attempted to defraud me over $3,000 for an entirely new steering column, and refuse to honor promised repair warranty despite their own negligence that created the damage. I found out that Hyundai models including mine have coupler issues involving recalls, years ago. I was not aware of this, and so not sure if my vehicle was part of the recall. However, Hyundai Motor America failed to notify me to take my vehicle in for a safety check for the vehicle coupler. And while I found that that my vehicle qualified for an extended warranty due to the recall, HMA so lacking in responsibility, sound business and moral ethics, let alone serious concern for my safety, claims that my vehicle is past the extended warranty by a completely insignificant mileage. As far as am concerned my vehicle is not safe to drive, and it remains at the dealership while I exhaust all avenues to have my car fixed. I have documents including clear repair notes and service request documents to support my complaint. Complaint being filed against both the dealership, Northbay Hyundai and the manufacturer, Hyundai Motor America.

NHTSA ID

11735156

Incident

Jan 9, 2026

EPS light came on and we changed the part and it came back on again I spent $350 for this service but I saw online that Hyundai is having a recall for my year and model car to reprogramming eps but my vin is not included. Is it possible they can include my vin ?

NHTSA ID

11727532

Incident

Mar 13, 2026

The EPS light started coming on intermittently back in Nov. 2025 and power steering became very difficult. I could get it to reset by turning off the car and turning steering wheel all the way to right and then left and then back to center and restart. The steering ability returned but the light eventually came back on. I had Firestone look at this in Nov. and they recalibrated but advised if problem returned that I should contact dealer due to recall for 2010 Elantras for same issue. The light came back on this weekend. I note the recall is for Elantras manufactured through April 30, 2010. My car was manufactured June 20, 2010…. 6 weeks after the dates of the recalled models. Clearly this issue is affecting my car also. I plan to call the dealer and try to get them to look at it and see if they will repair under the recall… but I wanted to report this to you also since is affecting models outside the original recall dates.

NHTSA ID

11710269

Incident

Nov 8, 2025

The contact owns a 2010 Hyundai Elantra. The contact stated that while driving at various speeds, the steering wheel became difficult to turn in direction with the ABS warning light illuminated. After turning off and restarting the vehicle, the vehicle operated normally, but the failure reoccurred. Recently, the failure reoccurred, and the vehicle was restarted, but failed to self-correct. The cause of the failure was not yet determined. The manufacturer and local dealer were not notified of the failure. The contact was informed that the VIN was not included in NHTSA Campaign Number: 15V100000 (STEERING). The contact stated that the vehicle had experienced the same failure listed in the recall. The failure mileage was 85,000. The VIN was not available.

NHTSA ID

11694991

Incident

Oct 6, 2025

Mileage

85,000 mi

The contact's mother owns a 2010 Hyundai Elantra. The contact stated that while his mother was driving at an undisclosed speed, the "Power Steering" warning light illuminated. The contact's mother had taken the vehicle to a local dealer, where it was diagnosed and determined that the power steering assist module needed to be replaced. The vehicle was not repaired. The contact had called the manufacturer and was informed that the vehicle was repaired under NHTSA Campaign Number: 15V100000 (Steering); in 2018, and the vehicle was no longer under recall. The failure mileage was approximately 110,000.

NHTSA ID

11681342

Incident

Apr 7, 2025

Mileage

110,000 mi

The National Highway Traffic Safety Administration (NHTSA) has issued an urgent safety advisory regarding dangerous, counterfeit driver‑side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN), that have been identified in U.S. vehicles following prior crashes, theft, or non‑certified airbag replacements. These inflators are not approved for use, may rupture during deployment, and have caused serious injuries and fatalities. Please see attached announcement, provided by NHTSA, for more details.

The National Highway Traffic Safety Administration (NHTSA) has identified the presence of substandard and dangerous driver’s-side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN). These inflators were not supplied, approved, or authorized by the vehicle manufacturers and have primarily been found in vehicles that previously experienced a crash and underwent airbag replacement using non-genuine parts. These dangerous inflators have ruptured during deployment, posing a serious risk of injury or death due to metal fragments entering the vehicle cabin. To date, Hyundai is aware of three people who have died while driving a Hyundai vehicle with one of these substandard replacement airbag inflators that deployed in what likely would have been a survivable crash. NHTSA has issued a public advisory urging vehicle owners and service professionals to have vehicles inspected if there is reason to believe that a non-genuine replacement airbag may have been installed. Vehicles with salvage or rebuilt titles, prior airbag deployments, or unknown repair histories may present a higher risk. NHTSA strongly cautions against self-inspection by vehicle owners and recommends inspection by trained technicians.

This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.

This bulletin contains information about the proper removal of the windshield wiper blade protective cover on all models. If the protective cover is not removed correctly, there is a possibility of the rubber insert and rail spring becoming partially separated on the inner side of the wiper blade, which could lead to poor wiping performance and/or possible scratching of the windshield glass. Follow the procedure in this bulletin to properly remove the windshield wiper blade protective cover on all new wiper blades.

This bulletin provides important checkpoint guidelines when performing engine oil and filter change services.

Hyundai applies a Paint Protection Film (PPF) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can become clouded under the PPF. These spots are the result of moisture trapped between the PPF and the paint.