2003 Toyota Highlander

Automatically disengage the transmission Stopped the road Icalled my husband Myhusband came and together we got the car to a safe place.Then Icame home with my husband and he called the insurance company and had the car towed. Ifound a place to fix the car and they said the transmission was broken and it cost about 6500 dollars.Icontacted the insurance company said they couldn’t help.The car was towed home and is not available.

NHTSA ID

11523925

Incident

May 8, 2023

The hood latch cable inside the vehicle when pulled did not allow the hood to open now the secondary hood latch is stuck in the closed position and will not release..I have to use a strap from wheel opening to wheel opening to keep my hood secure so when I am driving my hood won't open at high speeds

NHTSA ID

11513146

Incident

Oct 1, 2022

PASSENGER WINDOW HAS HAD TO BE FIXED MULTIPLE TIMES. COMES OFF THE TRACK AND WILL NOT CLOSE. HAVE HAD INTERIOR DAMAGE BECAUSE OF IT

NHTSA ID

11374150

Incident

May 6, 2016

2003 TOYOTA HIGHLANDER 4 CYL. SERVICE BULLITON FROM THEM #310436. HEAD BOLTS COMING UNDONE INSIDE MOTOR CAUSING CATASTROPHIC FAILURE OF MOTOR. BOLTS NOT HOLDING DOWN MFGR KNOWS ABOUT THIS. WAS A MANUFACTURING PROCESS THAT DID NOT WORK. ON CARCOMPLAINTS.COM THIS IS A RAMPANT PROBLEM REPORTED. READS ALMOST LIKE A PLAY BOOK ON HOW THE MOTOR OVERHEATS AND FAILS, TOLD HEADGASKET, AFTER OPENING UP THE MOTOR IT IS FOUND THAT THE HEAD BOLTS BACKED OUT. TOYOTA IS NORMALLY A GREAT CAR. I STILL OWE MONEY ON THIS CAR AND TOYOTA IS BASICALLY NOT TAKING CARE OF THEIR CUSTOMERS AND LEAVING US OUT TO DRY. PLEASE ISSUE A RECALL ON THIS. VEHICLE WAS DRIVING AND QUICKLY OVERHEATED. THIS HAPPENED TWICE IN A SHORT DISTANCE. EASILY CAN LEAVE ONE STRANDED. NO STEAM OUT THE TAILPIPE AND WATER GUSHED OUT SIDE OF MOTOR. DEALER LEFT MOTOR APART WHEN I WENT TO PICK IT UP AFTER BEING DRAGGED ABOUT. THEY PROMISED TO FIX IT AT FIRST AS THEY DUG INTO THE MOTOR THEY BACKED OUT OF THEIR WORD.

NHTSA ID

11270240

Incident

Oct 1, 2019

Mileage

140,000 mi

HEAD ON COLLISION AIR BAGS DID NOT DEPLOY SPEEDS 25-40 MPH

NHTSA ID

11268617

Incident

Sep 30, 2019

Mileage

126,000 mi

PAINT SEAL DELAMINATION

NHTSA ID

11265544

Incident

Oct 1, 2016

I WAS IN MOTION WHEN WE HIT A COW GOING 45MPH THAT JUMPED OUT AT MY HUSBAND AND I MY AIR BAGS DID NOT DEPLOY THE CAR IS TOTALED WAS CITY STREET

NHTSA ID

11258297

Incident

Sep 17, 2019

Mileage

216,616 mi

TL* THE CONTACT OWNS A 2003 TOYOTA HIGHLANDER. WHILE DRIVING 40 MPH ON ICE, THE POWER STEERING SEIZED AND THE REAR DRIVER'S SIDE WHEEL LOCKED UP. AS A RESULT, THE VEHICLE SPUN OUT AND CRASHED INTO A SNOW MOUND. THE AIR BAGS DID NOT DEPLOY. THERE WERE NO INJURIES. A POLICE REPORT WAS FILED. THE VEHICLE WAS TOWED TO THE CONTACT'S HOME. THE DEALER AND MANUFACTURER WERE NOT MADE AWARE OF THE FAILURE. THE CAUSE OF THE FAILURE WAS NOT DETERMINED. THE FAILURE MILEAGE WAS 200,000.

NHTSA ID

11172554

Incident

Jan 25, 2019

Mileage

200,000 mi

To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.

The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.

Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.

Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to remove the RapgardTM protective film within 90 days from initial application.

Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid. Follow the Repair Procedure in this bulletin to clean vehicles that may have been subjected to contamination by airborne iron particles such as rail dust during rail transportation or extended storage near industrial areas.

The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.