2023 Nissan Sentra

When I plug my phone in to USB android auto starts up and when I begin to play music it's stops or you hear a lot of static,so if I want to listen to music I have to plug in to aux and when you use aux the android auto don't work . When listing to music can't use the display screen 1

NHTSA ID

11755806

Incident

Dec 31, 2023

The camera views are all pink or turning pink. Also when getting to 70mph on the interstate, the car begins to shudder. The vehicle has 52,000 miles on it.

NHTSA ID

11736970

Incident

May 1, 2026

The contact owns a 2023 Nissan Sentra. The contact stated that while the vehicle was parked in the driveway and shifted to park(P), the vehicle started to slowly roll backwards unexpectedly. While attempting to re-enter the vehicle to stop the vehicle, the contact was knocked to the floor by the driver’s side door. The contact sustained injuries to the knees, back, thighs, and a concussion. The contact received medical treatment and an appointment for an MRI was scheduled. The dealer was not notified of the failure. The manufacturer was not notified of the failure. The failure mileage was 75,300.

NHTSA ID

11725886

Incident

Mar 6, 2026

Mileage

75,300 mi

The contact owns a 2023 Nissan Sentra. The contact stated that while driving approximately 40 MPH, the vehicle stalled and unintendedly decelerated. The vehicle was driven to the parking lot and came to a complete stop. The vehicle was restarted and driven to the residence. Upon arrival at the residence, the vehicle failed to restart with the check engine warning light illuminated. An independent mechanic arrived at the residence, and the mechanic diagnosed the vehicle and determined that the engine had seized. The local dealer was contacted, and an estimate for the repair was provided. The vehicle was not taken to the dealer and was not repaired. The mechanic stated that the engine was cracked and was a rebuilt engine, not a new engine. The contact purchased a used engine from a salvage yard for replacement. The manufacturer was not notified of the failure. The failure mileage was approximately 100,000.

NHTSA ID

11722181

Incident

Jan 14, 2026

Mileage

100,000 mi

After 8 months of driving my car brand new I started experiencing multiple intermittent malfunctions in the dash board & infotainment system. I have documentation of DTC codes current in my ECU. These codes each dealership refused to find and instead replaced my car battery, wiping the codes & replacing my infotainment system after it completely failed. After repeated repair attempts each dealership failed to successfully repair under warranty & told me to drive the car as normal when these malfunctions continued. These electrical malfunctions were at one point affecting my alternator which I also have documentation of. The car has lost power yet the engine stays running while I am driving. My handsfree is intermittent everyday. I am now way past my warranty & extended warranty due to following dealerships advice to drive the car as normal and bring back. These ongoing malfunctions create unreasonable safety risk which I believe falls under 49 U.S.C. Chapter 301 — the National Traffic and Motor Vehicle Safety Act. A third party diagnostics shop told me my car would have to be taken apart to find the grounding issues as this is clearly a manufacturing defect. These repairs have cost me money and I refuse to keep paying these dealerships if they aren't willing to resolve the core problem. I get constant push back from each dealership. I've already engaged with Nissan consumer affairs, a Lemon Law attorney, and filed with my State AG, AG recommended while undergoing an IDR that I file a complaint here as well. Please help.

NHTSA ID

11719365

Incident

Oct 11, 2023

Key Fob consistently displays “Low Battery” on the dashboard even after replacing the batteries on both key fobs. However, when using the remote start, using either key fob, no warning displays on dashboard.

NHTSA ID

11689839

Incident

Sep 1, 2025

When my iPhone is connected to Apple CarPlay in my vehicle, a loud static sound occurs during phone calls, and music playing. This static causes the audio to cut in and out, making conversations unintelligible. Because of this, I am unable to safely use the hands-free calling feature, which forces me to either end the call or take my hands off the steering wheel and eyes off the road to put the call on the phone’s speaker. The problem is frequent, occurring multiple times per day. The only temporary fix is to physically unplug the CarPlay cable and plug it back in, which is dangerous to do while driving. This is a serious safety issue because it defeats the purpose of hands-free communication, which is required in many states to comply with distracted driving laws. Other owners of the same make and model have reported experiencing the same CarPlay static and call dropouts, suggesting this is not an isolated case but a possible defect. If the vehicle is to be driven safely and legally, the hands-free calling function must work without forcing the driver to take unsafe actions. This issue should be investigated as it creates a significant risk of driver distraction and potential accidents.

NHTSA ID

11679614

Incident

Mar 13, 2025

Rear back up camera just turned purple out of no where

NHTSA ID

11669635

Incident

Jun 26, 2025

CERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label” may be needed. HINT: Certification Label = FMVSS (Federal Motor Vehicle Safety Standards) label. These items may be available from Nissan by request if certain criteria are met. This bulletin lists the criteria and provides an application form for such replacements. · The “VIN Plate/Label” (metal plate or vinyl label) is attached to the instrument panel or body on the driver side at the base of the windshield (see Figure 1). · The “Certification Label” (vinyl adhesive label) is located on the lower area of the driver side B-Pillar (see Figure 1).

CERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label” may be needed. HINT: Certification Label = FMVSS (Federal Motor Vehicle Safety Standards) label. These items may be available from Nissan by request if certain criteria are met. This bulletin lists the criteria and provides an application form for such replacements. · The “VIN Plate/Label” (metal plate or vinyl label) is attached to the instrument panel or body on the driver side at the base of the windshield (see Figure 1). · The “Certification Label” (vinyl adhesive label) is located on the lower area of the driver side B-Pillar (see Figure 1).

INTELLIGENT CRUISE CONTROL INOPERATIVE AND AEB/FEB WARNING LIGHT ON OR RADAR OBSTRUCTION MESSAGE DISPLAYED WITH DTC C1A16 OR C2582 IF YOU CONFIRM IMPORTANT: The purpose of ACTION (on the next page) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to successfully completing this repair. Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle. The customer states that the ICC stopped working while driving, OR The customer states that the AEB/FEB warning light is ON, or turned ON, while driving (Figure 1), OR The message “Unavailable Front Radar Obstruction” or “Forward Driving Aids Temporarily Disabled Front Sensor Blocked See Owner's Manual” has displayed while driving (Figure 2). AND DTC C1A16, C1A16-97, C2582, or C2582-97 is the ONLY DTC stored. Figure 1 Figure 2 This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. Forward Driving Aids Temporarily Disabled Front Sensor Blocked See Owner’s Manual

AUTOMATIC EMERGENCY BRAKING WARNING LIGHT BLINKING APPLIED SYSTEMS: Vehicles equipped with a lane camera (see Figure 1) SERVICE INFORMATION If the Automatic Emergency Braking (AEB) warning light or is blinking (but not illuminated steadily) or the customer states it is blinking, and there are no related DTCs, inspect the windshield. A blinking AEB warning light may occur under the following conditions:  When contamination or foreign material adhere to the lane camera viewing window on the windshield.  When driving while it is snowing or when frost forms on the lane camera viewing window on the windshield.  When the lane camera viewing window on the windshield is temporarily fogged up. Figure 1 Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle. HINT: o Refer to the applicable ESM for diagnosis if DTCs are present in the Laser/Radar, ICC/ADAS, or Lane Camera systems. o For further information:  Refer to the following pages.  Use the search keyword “blinking” in the ESM.

SERVICE INFORMATION If one of the APPLIED VEHICLES has DTC P2100 for “ETC MOT PWR-B1” or P2101 for “ETC FNCTN/CIRC-B1” stored in the Engine Control Module (ECM) with a customer complaint of loss of power,  Perform the revised Electronic Service Manual (ESM) procedure noted on page 2 for "PERFORM DTC CONFIRMATION PROCEDURE." HINT: This revised procedure will be added to the ESM in a future update.

DTC B00A0-00 STORED This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. IF YOU CONFIRM DTC B00A0-00 (OCCUPANT DETECTION SENSOR UNIT) is stored, AND OCS zero point reset cannot be performed, (continued on the next page)