2024 Nissan Sentra

Since I purchased the vehicle, I turn my steering wheel all the way to the left. It makes this clicking sound, and I can feel the clicking under me like it’s coming from the driver side and I have a maintenance notification on my dashboard fan. The clicking noise has gotten worse and made me do my own research on the problem. The tire needs maintenance, but there’s no flat so something told me to google exactly what was the problem was and I got a message on Google stating that there are many recalls on this particular car about a CV joint on the axle. I know that this is the problem because everything that was said online from people that had the car previously it’s the exact problem that I have. I need this inspected immediately.

NHTSA ID

11755787

Incident

Apr 14, 2026

The front left axle was replaced twice and the right axle replaced twice. Both have broken consistently. They were replaced by Nissan Dealer all times. My safety was put at risk by having to drive the vehicle with broken axles. There were no warning signs u til the axles started clicking and popping upon turning. The vehicle is available for inspection even though it is temporarily fixed.

NHTSA ID

11755621

Incident

Feb 9, 2026

I am submitting this complaint regarding what I believe is a premature paint system failure on my 2024 Nissan Sentra (VIN: [XXX]). At approximately 30,000 miles, the paint on the rear bumper and the front hood has developed extensive chipping and peeling that appears excessive for a vehicle of this age and mileage. While some stone chips are expected during normal driving, the extent and severity of the paint failure suggest the factory paint system may not have been properly applied. The damaged areas appear to have little or no visible primer beneath the paint, indicating what I believe may be poor paint adhesion, inadequate primer application, or an insufficient clear coat. The paint chips away very easily, exposing the underlying surface. I initially brought the vehicle to Loyalty Nissan in Short Pump, Virginia. Because that dealership does not have a collision or paint repair facility, I was referred to Hyman Brothers Nissan in Midlothian, Virginia for evaluation. During my discussions at Hyman Brothers, I was verbally informed by the dealership's paint technician that the condition appeared consistent with either an insufficient amount of hardener in the paint, an excessively thin clear coat, or both. Based on my own observations, I also believe the primer may not have been properly applied because little or no primer is visible where the paint has chipped away. However, these observations were not included in the dealership's written documentation. I opened a case with Nissan Consumer Affairs requesting warranty coverage. My claim was denied based solely on photographs submitted for review. I do not believe the concerns raised by the dealership personnel regarding the apparent quality of the factory paint application were fully considered during Nissan's review. Not enough room for the rest of information INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

NHTSA ID

11754143

Incident

Dec 31, 1969

Good morning. I wanted to make you aware of a potential safety concern with the 2024 Sentra. The ECO button is very close to the trunk open button, and on 2 separate occasions, I have accidentally opened my trunk instead of switching to eco mode while driving. Luckily, at the time of these incidents, I was traveling at a relatively low speed and able to quickly pull over. But this could be quite dangerous if it happened on the interstate or other major highway at higher speed and if there are items inside the trunk that could fall out. It seems like common sense that the trunk should remain locked and unable to open while the vehicle is in drive.

NHTSA ID

11749258

Incident

Jul 8, 2026

The contact owns a 2024 Nissan Sentra. The contact stated while driving at an undisclosed speed, the charging port, bluetooth feature, and the navigation system was inoperative. The low tire pressure, air bag and another unknown warning light was illuminated. The vehicle was taken to a dealer to get a diagnosis however, the vehicle was not diagnosed or repaired. The contact did research and was made aware of an unknown NHTSA Campaign Number however, the VIN was not included. The manufacturer was not notified of the failure. The failure mileage was approximately 36,979.

NHTSA ID

11737554

Incident

May 13, 2026

Mileage

36,979 mi

Headlights go out, completely dark while driving. This happens whether in auto lights or manual lighting.

NHTSA ID

11737155

Incident

May 3, 2026

Sway bar links are defective. The new one has just as much play is the old one. All oem Nissan parts.

NHTSA ID

11737036

Incident

May 11, 2026

The contact owns a 2024 Nissan Sentra. While the contact’s daughter was driving approximately 10 - 15 MPH and turning to the right, the front driver’s side wheel assembly, including the drive shaft, strut, shocks, and brake line detached from the vehicle. The vehicle was coasted to a stop, and the contact was immediately called. The driver had the vehicle towed to the dealer, but the vehicle was not yet diagnosed or repaired. The manufacturer was not made aware of the issue. The failure mileage was approximately 30,000.

NHTSA ID

11726611

Incident

Mar 21, 2026

Mileage

30,000 mi

CERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label” may be needed. HINT: Certification Label = FMVSS (Federal Motor Vehicle Safety Standards) label. These items may be available from Nissan by request if certain criteria are met. This bulletin lists the criteria and provides an application form for such replacements. · The “VIN Plate/Label” (metal plate or vinyl label) is attached to the instrument panel or body on the driver side at the base of the windshield (see Figure 1). · The “Certification Label” (vinyl adhesive label) is located on the lower area of the driver side B-Pillar (see Figure 1).

CERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label” may be needed. HINT: Certification Label = FMVSS (Federal Motor Vehicle Safety Standards) label. These items may be available from Nissan by request if certain criteria are met. This bulletin lists the criteria and provides an application form for such replacements. · The “VIN Plate/Label” (metal plate or vinyl label) is attached to the instrument panel or body on the driver side at the base of the windshield (see Figure 1). · The “Certification Label” (vinyl adhesive label) is located on the lower area of the driver side B-Pillar (see Figure 1).

AUTOMATIC EMERGENCY BRAKING WARNING LIGHT BLINKING APPLIED SYSTEMS: Vehicles equipped with a lane camera (see Figure 1) SERVICE INFORMATION If the Automatic Emergency Braking (AEB) warning light or is blinking (but not illuminated steadily) or the customer states it is blinking, and there are no related DTCs, inspect the windshield. A blinking AEB warning light may occur under the following conditions:  When contamination or foreign material adhere to the lane camera viewing window on the windshield.  When driving while it is snowing or when frost forms on the lane camera viewing window on the windshield.  When the lane camera viewing window on the windshield is temporarily fogged up. Figure 1 Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle. HINT: o Refer to the applicable ESM for diagnosis if DTCs are present in the Laser/Radar, ICC/ADAS, or Lane Camera systems. o For further information:  Refer to the following pages.  Use the search keyword “blinking” in the ESM.

INTELLIGENT CRUISE CONTROL INOPERATIVE AND AEB/FEB WARNING LIGHT ON OR RADAR OBSTRUCTION MESSAGE DISPLAYED WITH DTC C1A16 OR C2582 IF YOU CONFIRM IMPORTANT: The purpose of ACTION (on the next page) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to successfully completing this repair. Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle. The customer states that the ICC stopped working while driving, OR The customer states that the AEB/FEB warning light is ON, or turned ON, while driving (Figure 1), OR The message “Unavailable Front Radar Obstruction” or “Forward Driving Aids Temporarily Disabled Front Sensor Blocked See Owner's Manual” has displayed while driving (Figure 2). AND DTC C1A16, C1A16-97, C2582, or C2582-97 is the ONLY DTC stored. Figure 1 Figure 2 This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. Forward Driving Aids Temporarily Disabled Front Sensor Blocked See Owner’s Manual

SERVICE INFORMATION If one of the APPLIED VEHICLES has DTC P2100 for “ETC MOT PWR-B1” or P2101 for “ETC FNCTN/CIRC-B1” stored in the Engine Control Module (ECM) with a customer complaint of loss of power,  Perform the revised Electronic Service Manual (ESM) procedure noted on page 2 for "PERFORM DTC CONFIRMATION PROCEDURE." HINT: This revised procedure will be added to the ESM in a future update.

DTC B00A0-00 STORED This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. IF YOU CONFIRM DTC B00A0-00 (OCCUPANT DETECTION SENSOR UNIT) is stored, AND OCS zero point reset cannot be performed, (continued on the next page)