2005 Jeep Grand Cherokee

Chrysler is conducting a safety recall of approximately 643,618 model year 2006-2007 Jeep Commander and model year 2005-2007 Jeep Grand Cherokee vehicles to address the problem of ignition turning off while driving (see NHTSA recall 14V-438 for more information).According to Chrysler, these vehicles may experience an unintended change in ignition switch position while driving, which may result in loss of engine power, power steering, and braking assist, increasing the risk of a crash and disabling one or more of the vehicle's safety features including the frontal air bags.Most of the reported incidents occurred as a result of driver interaction with the ignition key.Based on the recall action taken by Chrysler, this Preliminary Evaluation is closed.Additionalinformation on this closing resume, and the investigation are in the PE14-017 public file available online at SaferCar.gov.The ODI reports cited above can be reviewed online at http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers: 10101116 10103300 10106060 10112589 10116788 10126986 10128093 10130780 10145501 10146213 10153018 10155291 10156396 10158165 10162933 10166746 10178559 10183305 10186545 10189530 10192237 10193106 10194092 10199552 10199986 10221500 10222283 10227253 10231011 10328609 10358324 10392364 10577532 10585326 10585976 10599142 10604990 10605091 10605209 10606494 10606610 10607043 10607614 10607785 10608196 10615565 10615671 10615761 10616124 10633266 10633313 10633724 10639371 10640010 10644827 10652526 10653000 10653382 10654009 10654139 10654809 10655095 10659448 10662220 10662703

The contact owns a 2005 Jeep Grand Cherokee. The contact stated that the vehicle was taken to the local dealer for repair under NHTSA Campaign Number: 14V438000 (Electrical System). While placing the key in the ignition, it was extremely tight. The driver thought the key could possibly break. The Uconnect and power train warning lights were illuminated. The contact was alerted that the brake lights were inoperable. The vehicle was taken back to the local dealer, who informed the contact that the vehicle was serviced with no brake lights and informed the contact that a diagnostic test was needed. The vehicle was not diagnosed or repaired. After taking possession of the vehicle, there was an abnormal sizzling sound coming from the dashboard, and the radio was inoperable. The manufacturer was not contacted. The failure mileage was approximately 145,677.

NHTSA ID

11709581

Incident

Jan 6, 2026

Mileage

145,677 mi

The contact owns a 2005 Jeep Grand Cherokee. The contact stated while driving 35–40 MPH, the engine seized. No warning lights were illuminated. The vehicle was able to restart after several attempts. The contact stated that the failure had occurred several times, including three times while driving to the dealer. The contact referenced NHTSA Campaign Number: 14V438000 (Electrical System) which was associated with the VIN. The vehicle was taken to the dealer, where the contact was informed that the recall repair might not be able to be performed because of the age of the vehicle. In addition, the contact was informed that if the repair was approved by the manufacturer, the labor fee might be at the owner's expense. The contact was informed that the manufacturer needed to approve the repair. The vehicle was not repaired. The dealer made the manufacturer aware of the failure. The failure mileage was approximately 184,111.

NHTSA ID

11701189

Incident

Nov 22, 2025

Mileage

184,111 mi

Every single code is displayed when using a ODB2 scan tool. I have many electrical issues that go away and come back. Sluggish performance. Random components inside the jeep will fail at random. I’m thinking the ECU is faulty. Somedays it will run fine with all the codes still present.

NHTSA ID

11690782

Incident

Sep 10, 2024

Lights on the dashboard were blinking, there were no turning signals, the gas gauge was not working, and the check engine light was flashing. My safety was put at risk because I could not let people know when I was turning. I took it to the dealer, and they said there were too many codes, but none were active for them to fix the problem. So, I have to drive the jeep, but this is dangerous. The warning keeps showing me that there is a problem with the ignition switch that was previously recalled. I want this taken care of, please.

NHTSA ID

11643852

Incident

Feb 8, 2025

Dash will read "ESP System Disabled" during this the engine light and red lightning in brackets ( ) turns on, on the dash. This affects the acceleration there is none and brakes work but is slow to come to a full stop. An inspection can be scheduled. This happens anytime and randomly, getting safely off the road is hard. First happened April 1, 2024 then April 3, 2024. Had a family mechanic work on it got it back and less than a day having it back and it happened 5 more times just driving to work on August 28, 2024.

NHTSA ID

11611337

Incident

Apr 3, 2024

The contact owns a 2005 Jeep Grand Cherokee. The contact stated that while starting the vehicle, there was an abnormal tapping sound coming from the engine. There were no warning lights illuminated. The vehicle was taken to the local dealer, where it was diagnosed that the lifters needed to be replaced. The vehicle was not repaired. The manufacturer was not contacted. The failure mileage was approximately 150,000.

NHTSA ID

11601586

Incident

Jan 1, 2019

Mileage

150,000 mi

The contact owns a 2005 Jeep Grand Cherokee. The contact received notification of NHTSA Campaign Number: 14V438000 (Electrical System) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that while driving at an undisclosed speed, the service brakes and the power steering were inoperable. The contact used the parking brake to stop the vehicle. The contact stated that after enabling the parking brake, the vehicle independently shut off. The dealer was made aware of the failure but confirmed that parts were not yet available. The vehicle was not repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 191,191.

NHTSA ID

11567186

Incident

Jan 23, 2024

Mileage

191,191 mi

P41 Ignition switch recall was completed on my vehicle 11/2015. Prior to receiving recall notification I experienced no problems with accidently hitting the key while driving. Now I am experiencing great difficulty turning the ignition switch. One of my vehicle keys broke off while trying to turn the car on to drive. Most times I get in the car to go somewhere there is always an issue getting the key to turn allowing the car to turn on. The warranty for the recall has expired and I am very upset that there is nothing that can be done to rectify this problem without having out of pocket expenses. This is very frustrating and I am afraid my last key is going to break off while trying to start vehicle.

NHTSA ID

11544163

Incident

Dec 29, 2017

Verify Reman part number availability. Order the "R" part number for all orders: Warranty, Mopar, customer pay and service contract. Order "68" part number for New unsold units only.

Plate - Planetary

Security Module Lock Out After Entering the PIN to Unlock The Wireless Control Module (WCM)

Security Module Lock Out After Entering the PIN to Unlock The Wireless Control Module (WCM)

Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.

NAG1 Transmission Before installing the transmission with the engine, check for dowel pins (2) for alignment. If the pins are missing request to add the dowel pin first and then install the transmission