2015 Toyota Camry

The vehicle's braking system intermittently self-activates, engaging the brakes with no obstruction, pedestrian, or object present in the vehicle's path and no driver input. This creates an unpredictable, unprovoked braking event while driving, which is a direct safety hazard to the driver and to other vehicles on the road that may not anticipate sudden deceleration. A distinct pattern has been observed: after the brake pedal is touched, the vehicle behaves as though it believes it is on an incline, repeatedly reapplying the brakes on its own in a pulsing or repeated manner, even on flat, level ground with no incline present. This repeated self-application occurs without further driver input. The dealership has attempted repairs on multiple occasions. On the first visit, the brake booster was replaced. This did not resolve the issue, and additionally caused the brake lights to remain illuminated overnight, draining the vehicle battery. On a second visit, a brake bracket was replaced; the self-braking defect recurred within minutes of leaving the dealership. On a third visit, the vehicle was retained by the dealership for approximately three weeks, during which a brake switch was replaced; the defect recurred after approximately one day of normal driving. The problem has been reproduced and acknowledged by the dealership's service department on multiple occasions, as evidenced by the repeated repair attempts targeting the braking system (brake booster, brake bracket, brake switch). Despite three separate repair attempts across different brake-related components, the dealership has been unable to identify or correct the root cause. Dealership service management stated they can only make repair recommendations and cannot guarantee that any given repair will resolve the issue, and that their process involves replacing parts until the defect happens to stop occurring. The dashboard brake warning light is on, and an ABS warning light also illuminates intermittently.

NHTSA ID

11747547

Incident

Dec 30, 2025

On Friday, December 5, 2025, I was coming out of the driveway at the Jack In The Box on the corner of El Camino & Nobili Avenue in Santa Clara. My foot was on the break as I was going to stop at the end of the driveway to check to see if there was any traffic coming down Nobili before I exited the Jack In The Box driveway. All of a sudden before I even hit the end of the driveway while I had my foot on the brake, the car started to speed up (unintentional acceleration)and I continued to press my foot down harder on the brake, but nothing could stop it. A lot of black smoke came up out of the steering wheel area where it attached to the dashboard & all of the air bags around the car deployed. Then my car completely turned itself around and the front of my car was now facing the driveway that I had just come out of. This torque of acceleration and braking is why my car spun around 180 degrees. The vehicle had sustained damage to the front end, the hood, front bumper cover, right front head lamp was cracked, and the Toyota emblem was missing. (See attached photos taken at the time of the accident) Since all of the air bags in the whole car had completely deployed, I found that the only way I could get out of the car was to slide myself under the air bag that surrounded the driver side door. As I got out of the car, the rib that is directly under my right breast began to hurt very badly and it was hard for me to take a breath with the pain from that rib. I also had a bad headache, too. Plus, the top of my left hand was all red and felt like something had scratched the whole back of my hand. It hurt to touch it. I was also light-headed.The car, I was told, looked like I had hit a wall. The whole left front side of the car was severely mangled - the hood, the fender, and the tire was flat. The shocking thing was that I had not had an encounter with any car, nor had they hit me, to account for this damage.The Police & Fire Dept.& EMT's were called.

NHTSA ID

11740252

Incident

Dec 5, 2025

My white paint has started chipping in big chucks all over the car on every panel

NHTSA ID

11739026

Incident

Apr 30, 2025

Factory paint is delaminating and peeling in large sheets without collision damage. This appears consistent with known Toyota paint defects affecting similar vehicles.

NHTSA ID

11736957

Incident

Jan 18, 2026

When the air conditioner is set to heating, cold air blows on the passenger side, while the driver’s side works correctly.

NHTSA ID

11711723

Incident

Dec 21, 2021

Seatbelts do not retract properly. It is the driver side, passenger side and rear passenger side

NHTSA ID

11701253

Incident

Aug 1, 2025

!

NHTSA ID

11691131

Incident

Sep 1, 2025

The contact owns a 2015 Toyota Camry. The contact stated that while driving at various speeds and attempting to decelerate, there was an abnormal sound while depressing the brake pedal and the brake went to the floorboard. No warning light was illuminated. The vehicle was towed to a local dealer where it was diagnosed and determined that the brake master cylinder and brake pump might need to be replaced. The vehicle was not repaired due to the cost. The manufacturer was made aware of the failure. The failure mileage was approximately 82,600.

NHTSA ID

11686874

Incident

Sep 15, 2024

Mileage

82,600 mi

Some 2005 – 2026 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.

The air conditioning dye injection tool kit has been developed to aid in identifying the location of air conditioning refrigerant leaks. The procedures outlined in this Service Bulletin aid in locating, inspecting, and repairing refrigerant leaks.

Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.

To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.

The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.

Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to remove the RapgardTM protective film within 90 days from initial application.