2016 Toyota Camry

1. Component / System Failed: - The primary exterior paint and clear coat layer completely separated from the factory electro-coat (E-coat) primer on the vehicle's body structure (specifically near the rear quarter panel, roof pillar, and doors). The vehicle and affected component are available for inspection upon request. 2. Safety / Risk to Safety: - While driving at highway speeds (65+ mph), large, thick sheets of brittle paint layer detach and fly off the vehicle. This creates an unexpected road debris hazard for trailing motor vehicles, potentially causing driver distraction or windshield impact for vehicles behind me. Furthermore, large paint loss around the roof/windshield pillars creates noticeable glares and glare reflection in direct sunlight, compromising visual clarity. 3. Dealer / Professional Confirmation: - Yes. I brought the vehicle to a local Toyota dealership service center. The service department confirmed the paint detachment, noting it matches the known factory primer adhesion failure pattern addressed under Toyota Customer Support Program ZJB. However, they stated the extended program window had elapsed and refused coverage. 4. Prior Inspections: - The vehicle has been inspected by a Toyota dealership service department. It has not been inspected by police or insurance representatives as no collision has occurred yet. 5. Warning Lamps, Messages, or Prior Symptoms: - No dashboard warning lights or messages appeared prior to the failure, as this is a structural/body paint adhesion defect. The issue first appeared as minor blistering/bubbling along the panel edges without any external impact or stone chip damage, and rapidly progressed into large, multi-inch sections peeling off down to the bare grey primer.

NHTSA ID

11754611

Incident

Mar 29, 2025

The vehicle touch screen stopped working. It doesn't allow the options to be chosen (radio, audio, and general settings) . The screen remains frozen. The estimated cost for repair is $2,000. The steering wheel vibrate and makes noises when vehicle speed is 40 or above. Diagnostic reports a steering column replacement. Estimated cost $ 800- 2,000

NHTSA ID

11751122

Incident

Jul 17, 2026

Odometer Fraud. The contact purchased a 2016 Toyota Camry. The vehicle was a private sale from Facebook Marketplace. The contact stated that after purchasing the vehicle, the vehicle experienced various mechanic failure. The vehicle was taken to an independent mechanic where it was discovered that there was a mileage discrepancy. At the time of the purchase, the mileage was approximately 117,000; however, it was later discovered that the mileage was 257,080.

NHTSA ID

11751016

Incident

Jul 11, 2026

Mileage

257,080 mi

The METAL trunk torsion bar broke with no warning or symptoms while I was sitting in my vehicle with the trunk closed. While it sounds minimal, it caused such a deafening sound I initially thought there had been an explosion in the rear of my vehicle. This occurred a few minutes after I removed an item from the trunk and closed the trunk. I was sitting in the driver's seat with the car running about to back up when the explosive sound occurred. If the trunk had still been open, the risk of significant injury and death would have been quite high given the explosive sound made when it broke and slammed the interior of the trunk. If it had hit my head, chest or an artery with that level of force, it likely would have caused death in my opinion. There were ZERO warnings. My trunk worked fine, no symptoms of any kind that it was about to fail and that is what makes this so dangerous. This is a part that never should have failed. It should last the lifetime of the car. The largest part of the broken torsion bar IS available for inspection. The smaller piece that broke off and became a potentially lethal projectile must be somewhere behind the paneling, but I have not been able to find it. I can make my car available if an inspector would like to search for the missing piece. I have received a quote from the dealer for replacement, so it has been inspected. Components that failed in the trunk: 64531-06500 Hinge Torsion Bar Right Hand 64127-06110 Torsion Bar Bracket/Hardware Kit. Rear Spoiler/Hardware Kit Note- There is also a 64532-06500 Hinge Torsion Bar Left Hand that could possibly fail in the same way.

NHTSA ID

11742939

Incident

Dec 6, 2025

Paint delamination. It's a known issue. Toyota extended warranty to cover but the local dealership who sold the car is no help. First noticed the paint pealing a few months ago. Started small now increasing significantly.

NHTSA ID

11741520

Incident

Jan 1, 2026

My daughter accidentally rear ended someone in her Toyota Camry. The damage to the front end was severe enough that the car has been totaled but the air bags did not deploy.

NHTSA ID

11736791

Incident

May 1, 2026

Airbags did not deploy after an accident that resulted in the hood crumpling. Car was at a complete stop when hit from behind at approximately 45mph, resulting in the car being pushed forward into the back of another vehicle.

NHTSA ID

11730079

Incident

Apr 7, 2026

WAS GLIDING INTO MY GARAGE FOOT WAS ON BRAKE, (SO NO SPEED AT ALL) WHEN I HEARD A SUDDEN ENGINE ROAR AND CAR PICKED UP SPEED AND WAS PROPELLING ME TOWARD THE BACK WALL OF THE GARAGE. I IMMEDIATELY JAMMED ON MY BRAKE BUT WAS NOT ABLE TO STOP BEFORE HITTING RACKS AND WALL AT THE BACK OF MY GARAGE. THIS ACCELERATION OF THE CAR RESULTED IN PROPERTY DAMAGE TO CAR AND AND PROPERTY.

NHTSA ID

11719007

Incident

Feb 18, 2026

Some 2005 – 2026 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.

The air conditioning dye injection tool kit has been developed to aid in identifying the location of air conditioning refrigerant leaks. The procedures outlined in this Service Bulletin aid in locating, inspecting, and repairing refrigerant leaks.

Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.

To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.

The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.

Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to remove the RapgardTM protective film within 90 days from initial application.