2000 Toyota Camry

ODI'S DATA ANALYSIS FOUND THE FIRES RATES TO BE CONSISTENTLY LOW AND EVENLY DISTRIBUTED AMONG SIX MODEL YEARS AND SIX DIFFERENT ENGINE CONFIGURATIONS.ODI EXAMINED A VARIETY OF ROOT CAUSES, THOSE BEING DETONATION (RESULTING IN OIL PAN PUNCTURE FROM CONNECTING ROD), STARTER FIRES, VARIOUS FUEL RELATED FIRES, LEAKING OIL FILTERS, WIRING ISSUES, IMPROPER REPAIRS AND BRAKE FLUID LEAKS.NONE OF THE ISSUES EXAMINED HAD REPORTS THAT INDICATED A TREND WHEN NORMALIZED FOR POPULATON AND EXPOSURE.SEE ATTACHED REPORT FOR FULL DETAILS.

The contact owns a 1997 N/A Toyota Camry. The contact stated that the driver’s side seat belt mechanism had malfunctioned, and the retractor was not working properly. Additionally, the latching mechanism failed to latch securely or release as intended. The dealer was notified of the failure; however, the vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was 177,600.

NHTSA ID

11725602

Incident

Mar 19, 2026

Mileage

177,600 mi

@45,679 miles, the (plastic) driver door handle popped of the car when lifted without thumb just enough to begin to open the door. This was during the beginning of a big snowstorm. Luckily I was not idling the engine while cleaning the windshields or I could have been locked out of the car with the engine running. Now I must drive with 2 keys. The original owner of the vehicle, my mother was XXX when she bought it on 10/31/1999 for $23, 470 with 8 miles on the odometer; salespeople never mentioned the door handles were plastic. The failure was complete fracture all at once, not progressive; I suspect the plastic strain hardened from repetitive stress, making this a design defect rather than material quality. The driver's door latch is a safety issue; now I must struggle to enter the car, and you never know where you might be when you need quick entry, like in a rain. Paid cash w/ trade in for car. Door handle not yet repaired, but claim filed with Toyota Customer Experience Center (ref. # XXX). Request Toyota replace or repair door handle at their expense, preferably with aluminum handle on driver door lest problem recur. Also the car needs an OE solar panel to keep the battery charged for low mileage use. I replaced previous battery with new 7 yr warranty one on 1/22/25 and despite idling to recharge for 1 hr at a time, the battery now remains recurrently low. The vehicle was not sold for a given yearly mileage use, and my mom, now deceased, bought it for reliable safety during retirement & old age as my father died; the vehicle now belongs to our family trust, of which I am trustee. I request Toyota pay for a solar panel to be installed above rear window deck, on rubber tubed bolts spaced above the speakers, to keep battery recharged. Battery charge is obviously a safety issue, and idling is a pollutive, unforeseen expense. Both these issues should likely be recall issues because of the vehicle purchase price involved, as design negligence.

NHTSA ID

11715832

Incident

Dec 13, 2025

The contact owns a 1997 Toyota Camry. The contact received notification of NHTSA Campaign Number: 97V156000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. In addition, the contact lived in a hot climate area and believed that the recall would not affect the vehicle. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure.

NHTSA ID

11704532

Incident

Dec 11, 2025

The contact owned a 1997 N/A Toyota Camry. The contact stated that while an acquaintance was driving approximately 45 MPH, the acquaintance crashed into the rear of another vehicle. The air bags failed to deploy. The driver sustained neck pain and received medical assistance later. A police report was filed but the contact did not have the information available. The vehicle was towed to an independent mechanic, where it was totaled. The dealer and the manufacturer were not notified of the failure. The failure mileage was approximately 143,000. The VIN was not available.

NHTSA ID

11672453

Incident

Jun 18, 2025

Mileage

143,000 mi

The contact owns a 2000 Toyota Camry. The contact stated that the vehicle failed to immediately respond after the gear shifter was shifted into reverse(R). The contact stated that there was a hesitation before the vehicle responded. The contact stated that the failure reoccurred after shifting into drive(D). There was no warning light illuminated. The vehicle was taken to a local Pep Boys where it was diagnosed that the exhaust gas recirculation (EGR) vacuum switching valve needed to be replaced. The contact stated that the vehicle was not drivable. The dealer and the manufacturer were not notified of the failure. The vehicle was not repaired. The failure mileage was approximately 232,000.

NHTSA ID

11500303

Incident

Jan 5, 2023

Mileage

232,000 mi

The contact owns a 2000 Toyota Camry. The contact stated that the check engine warning light was illuminated. The vehicle was taken to an unknown local dealer however, it was not stated whether or not the vehicle was diagnosed or repaired. The vehicle was taken to an independent mechanic who replaced the EGR lines, oxygen sensor, and drive cycle. The contact stated that the failure recurred every year. The approximate failure mileage was 80,000.

NHTSA ID

11477148

Incident

Jan 1, 2008

Mileage

80,000 mi

My car has recalls on it and I want to get this fixed

NHTSA ID

11454403

Incident

Feb 28, 2022

Driving lights and back up lights are not bright enough even when changing the bulb. The lights constantly dim while on. The front lights are always on no matter what time of day it is. The rear of the car sways dangerously if driving over anything smooth, bumpy, like a manhole. Or turning and running over a manhole.

NHTSA ID

11450608

Incident

Feb 5, 2022

To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.

The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.

Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.

Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to remove the RapgardTM protective film within 90 days from initial application.

Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid. Follow the Repair Procedure in this bulletin to clean vehicles that may have been subjected to contamination by airborne iron particles such as rail dust during rail transportation or extended storage near industrial areas.

To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.